Import Astm B265 Titanium Strip — Buy in Bulk from Supplier in China

Baoji Mingkun Nonferrous Metal Co., Ltd offers ASTM B265 titanium strip in grades GR1 through GR4, GR5, 6AL4V Eli, GR7, GR9, GR12, GR23, TB3, TB6, TC4, TC6, TC11, TC17 and TC18, with thickness from 0.025 mm to 0.5 mm and width from 50 mm to 700 mm. The supplier cites ISO 9001:2008 certification and a stated supply capacity of 100 tons per month, with delivery lead times of 5 to 30 days. These dimensions place the material in the foil-to-strip transition range, suitable for applications requiring thin-gauge titanium with controlled surface finish and mechanical properties.

The product conforms to ASTM B265, AMS4911, AMS4911H and GB/T3621-2007 standards, covering both commercial-purity and alpha-beta titanium alloys. GR1 and GR2 offer maximum corrosion resistance and formability, while GR5 (Ti-6Al-4V) provides the highest strength-to-weight ratio among the listed grades, and 6AL4V Eli delivers enhanced fracture toughness for critical applications. Typical mill finish for cold-rolled titanium strip is bright annealed or pickled, with surface roughness Ra 0.8 to 1.6 micrometres standard for non-aerospace applications. The GR23 grade (Ti-6Al-4V ELI extra-low interstitial) is particularly valued in medical implant manufacturing where fatigue performance and biocompatibility are paramount.

Buyers in aerospace component fabrication, chemical processing equipment, medical device manufacturing and marine engineering source this material for heat exchanger plates, anode substrates, diaphragms and structural shim stock. The 0.025 mm minimum thickness supports etching and photo-chemical machining processes, while the 700 mm maximum width accommodates larger pressure-vessel cladding panels. Importers should confirm the specific temper (annealed or cold-worked), edge condition (slit or sheared) and flatness tolerance required for their forming operation, as these are not stated in the listing and vary significantly between end uses.

Baoji Mingkun Nonferrous Metal Co., Ltd is located at Dongxing Industry Garden, Baoji 721013, Shaanxi Province, China. Baoji is recognised as China's primary titanium production hub, hosting a concentration of sponge producers, mill product manufacturers and downstream fabricators. The supplier is classified as an imported-tier listing with harbour trust tier, and the profile shows a response rate of 0.00 percent with zero average response hours recorded, which indicates no recent quotation activity through the platform. The company holds ISO 9001:2008 certification according to its own statement.

The listing does not disclose factory size, annual revenue, number of employees, specific production equipment or named clientele. No independent verification of the ISO certificate is provided, and no additional quality system accreditations such as AS9100 for aerospace or ISO 13485 for medical are mentioned. Buyers should conduct direct due diligence on Baoji Mingkun's mill capabilities, including whether the company operates its own rolling mills or sources material from larger Shaanxi-based producers, and request mill test certificates with full chemical composition and mechanical test results for the specific grade and lot of interest.