Import 2025 - Meranti Marine Plywood Water Resistant — Buy in Bulk from Supplier in Indonesia

This listing offers 2025 production Marine Waterproof Plywood manufactured from Meranti wood species, a hardwood commonly used in marine and exterior applications due to its natural resistance to moisture and decay. The specified dimensions are 28mm thickness by 1220mm width by 2440mm length, though the supplier confirms all sizes are available upon demand. Each panel contains 12 pieces per cubic meter, with the standard 28mm size typically weighing approximately 28-32 kg per panel depending on moisture content and veneer composition. The construction uses Mix Meranti Core with high-density layering, where the face veneers on both sides are composed of genuine Meranti veneer while the core layers may include compatible hardwood species to achieve the required structural integrity. This marine-grade plywood is manufactured with WBP (Weather and Boil Proof) water-resistant glue, which meets international standards for exterior plywood applications where prolonged exposure to moisture is anticipated. The product is further enhanced with all four sides sealed by waterproof acrylic paint, creating a complete barrier against water ingress at the panel edges where moisture intrusion typically occurs. The supplier indicates this product serves as a direct replacement for traditional flooring in marine environments and outdoor applications where dimensional stability and water resistance are critical requirements.

The quality classification of this marine plywood is determined by the veneer grading of the face layers, with Meranti face plywood typically falling into B, BB, or CC grades depending on the allowable defects and patch repairs. The WBP glue line maintains structural integrity when subjected to boiling water testing for a minimum of 20 hours without delamination, which distinguishes it from standard moisture-resistant (MR) plywood that is only suitable for interior use. Meranti wood species from Indonesia typically exhibit specific gravity ranging from 0.55 to 0.75 g/cm³, with the higher-density material providing superior screw-holding capacity and resistance to impact damage. The core construction utilizes multiple plies arranged in cross-banded layers, with the 28mm thickness achieved through approximately 13-15 veneer layers depending on the manufacturer's layup schedule. For marine applications, the plywood should comply with relevant standards such as BS 1088 (British Standard for marine plywood) or equivalent specifications, though the listing does not explicitly state certification to any particular standard. The waterproof acrylic edge sealing applied at the factory provides initial protection but may require reapplication after cutting to size on site, as cut edges expose untreated core material.

This product targets buyers in the marine boat building industry, exterior construction sector, and applications requiring water-resistant sheet material such as warehouse flooring, outdoor signage, and temporary structures. The typical buyer profile includes boat yards, construction contractors, and wholesale distributors specializing in marine supplies. Trade terms from this supplier require payment of 30% deposit with the remaining 70% balance against copy of Bill of Lading, with Letter of Credit explicitly not accepted to avoid high banking costs. Minimum order quantity is calculated as one full 40-foot container loading of approximately 48 cubic meters, equivalent to 576 pieces packed on 16 pallets. Lead time depends on production scheduling and current factory backlog, and prospective buyers should confirm the estimated production timeline before placing orders. Logistics arrangements typically utilize FOB Jakarta or Surabaya ports, with the buyer responsible for freight, insurance, and customs clearance procedures at the destination port. Quality verification before shipment should include inspection for delamination, veneer overlaps, and proper edge sealing coverage, preferably conducted by a third-party inspection service familiar with plywood specifications.

CV Indo Bina Mandiri is an imported supplier category company based in Indonesia, specializing in the production and export of marine-grade plywood products. The supplier operates from Indonesia, which is a significant producer of tropical hardwood plywood due to the abundant availability of Meranti and other Shorea species native to Indonesian forests. The listing indicates this is an imported-tier supplier, meaning the product is sourced from Indonesian production for export markets. The trust tier is classified as harbor, which indicates basic verification of business registration without extensive on-site facility audits. The supplier's response rate is listed as 0.00% with average response hours at 0, suggesting limited activity on the platform or potentially new listings without historical transaction data. The company profile states they manufacture marine waterproof plywood from Meranti wood species with customization available for size and thickness requirements. The listing explicitly states they do not accept Letter of Credit payment terms due to high banking costs, requiring instead a 30% deposit and 70% balance against Bill of Lading copy. The supplier does not provide information about factory size, annual production capacity, employee count, or export history in the available product listing.

The product offering emphasizes customization capabilities, with the supplier willing to produce all sizes upon demand rather than limiting buyers to standard inventory sizes. The packaging is standardized at 12 pieces per cubic meter with the MOQ structured around full container loads of approximately 48 cubic meters (576 pieces on 16 pallets). The listing does not claim any third-party quality certifications such as ISO 9001, FSC (Forest Stewardship Council), or marine grade certifications like BS 1088 or Lloyds Register approval. The supplier does not provide details about their quality control procedures, testing capabilities, or whether third-party inspection is permitted before shipment. The response from the supplier indicates flexibility on dimensions and customization, but the lack of detailed company information means buyers should conduct their own due diligence regarding production capacity and quality management systems. The explicit statement about not accepting LC payments suggests this is a smaller operation or one that prioritizes simplicity in payment processing over securing payment through letters of credit.