从China供应商批发进口Double Disc Refiner — FOB条款

1, This machine consisted by the host pulping mechanism , worm wheel feeding mechanism, bearing, coupling and base version. 2, This machine is fixed on the two fixed abrasive discs of mill shell body and stator feed tray and installed on the rotor positioning plate of two rotor abrasive discs to form two grinding area. 3, Pulp passes through by the tube of the grinding shell body and the stator into the heart of the two grinding area, under the action of centrifugal force and slurry pressure through the grinding zone, after grinding zone tooth plate extrusion, complete the beating process, pulp out from mouth. 4, The rotor positioning plate connected to the main shaft with spline floating, as a flexible axial movement. 5, The grinding clearance is adjusted for the manual, through the worm gear transmission inspires wire mother rotates, the stator feed screw driven plate make the corresponding axial movement, makes the grinding area clearance change, grinding clearance and pressure to meet the process requirements, pressure current is the discâ??s instructions. 6, It takes the elastic cylindrical coupling, smooth operation. 7, The disc material is wear-resistant alloy cast iron, all by grinding. Instruction: It is main equipment to make coarse and pure pulp. It is used to regrind pulp dross and recycle paper, high efficiency and less eletricity consumption. Feature It is suitable for continuous refining chemical,mechanical,and waste paper pulp under the consistency of 3%-5.5%.It is idea pulp beating equipment.