从China供应商批发进口A36 Customized Carbon Steel Sheet — FOB条款

ASTM A36 carbon steel sheet from Jiangsu Steel Group Co., Ltd. is a hot-rolled structural steel plate designed for welded, bolted, or riveted construction. The material is supplied in thicknesses from 8 mm to 600 mm, widths from 1500 mm to 4200 mm, and lengths from 6000 mm to 18000 mm. Surface finish is clean, with blasting and painting available per customer requirement. The grade range includes A283GR.C/GR.D, A573GR.58/65/70, SS400, SM400A/B/C, S235JR/J0/J2, S275JR/J0/J2/N/NL/M/ML, 250/250L0/250L15, and Q235A/B/C/D, Q275A/B/C/D alongside the A36 designation. These dimensions and grade flexibility suit heavy fabrication where load-bearing capacity and weldability are critical.

A36 is a low-carbon steel with typical carbon content below 0.29%, giving excellent weldability and formability compared with higher-carbon plate. The material is produced to ASTM, AISI, BS, DIN, GB, and JIS standards, allowing cross-reference for importers working to mixed national codes. Hot-rolled manufacture leaves a mill scale surface unless blasted; painting can be applied for corrosion protection in outdoor or marine exposure. Thickness tolerance for hot-rolled plate typically runs to ASTM A6/A6M, with wider plate requiring attention to flatness and edge condition. For the upper thickness range above 200 mm, through-thickness properties and ultrasonic testing become relevant to lamellar tearing resistance.

Primary applications include building construction, bridge fabrication, architectural metalwork, vehicle components, shipping structures, high-pressure containers, boilers, and large steel framework. Buyers are typically structural fabricators, shipyards, pressure-vessel manufacturers, and heavy engineering contractors. Trade terms offered are FOB, CFR, and CIF. Payment is by T/T or L/C at sight. Jiangsu Steel Group Co., Ltd. lists a Shanghai office address; response rate and average response time data are not available, so direct contact is needed to confirm current lead times, minimum order quantities, and mill origin of the plate.

Jiangsu Steel Group Co., Ltd. maintains a registered office at 10/F, No. 257 Siping Road, Shanghai 080, Hongkou District, China. The supplier is classified as an imported-tier vendor with a harbor trust tier. No response rate or average response-hour data is available, which means buyers should initiate direct enquiry and assess communication speed themselves. The listing does not state factory location, production capacity, year of establishment, or employee count, so these details must be requested directly.

The company offers carbon steel coils and sheets across a broad grade spectrum, suggesting mill-direct or large-distributor sourcing rather than stock-only trading. The extensive standard coverage, ASTM through JIS, indicates experience with export markets requiring multi-standard certification. Buyers should verify whether the supplier holds mill certificates, third-party inspection certifications, or ISO registration, as none are listed. The Shanghai office location is convenient for inspection and logistics coordination, but confirmation of actual manufacturing source and capability is essential before contract.