从China供应商批发进口A36 Black Carbon Steel Sheet — FOB条款

A36 black carbon steel sheet from Jiangsu Steel Group Co., Ltd. is supplied in thickness ranges from 8 mm to 600 mm, with widths spanning 1500 mm to 4200 mm and lengths up to 18000 mm. The material conforms to AISI and ASTM standards, with grades including A283GR.C, A283GR.D, ASTM A36, A573GR.58, A573GR.65 and A573GR.70, as well as JIS SS400, SM400A, SM400B, SM400C, and EN S235JR to S275ML series. Surface finishes are delivered clean, with blasting and painting available on request to meet project-specific corrosion protection or aesthetic requirements.

The steel is a low-carbon structural grade, typical for applications requiring good weldability and formability without advanced heat treatment. Standard industry composition for A36 includes carbon up to 0.29%, manganese up to 1.0%, phosphorus up to 0.04% and sulfur up to 0.05%, with typical yield strength of 250 MPa and tensile strength ranging from 400 to 550 MPa. The sheets are produced via hot rolling, a process that ensures consistent mechanical properties and dimensional stability for heavy-duty use.

Primary buyers include construction firms, bridge builders, vehicle component manufacturers and shipbuilders, as well as fabricators of high-pressure containers, boilers and large structural frameworks. The material is traded under FOB, CFR and CIF terms, with payment accepted via T/T or L/C at sight. Importers should confirm coating specifications, tolerances and mill test certificates to ensure compliance with their engineering standards.

Jiangsu Steel Group Co., Ltd. operates from 10/F No.257 Siping Road, Shanghai 200080, Hongkou, China. The company is classified as an imported-tier supplier with a harbor trust tier, indicating a verified operational presence and adherence to baseline trade reliability standards. Its profile does not specify response metrics, so direct contact is recommended to confirm availability, customisation options and technical support.

The supplier specialises in carbon steel sheets and coils, offering a range of grades and dimensions tailored to industrial applications. While the profile does not list certifications, mill test certificates and compliance with ASTM, JIS and EN standards are typically provided upon request. Buyers should verify the supplier’s ability to meet specific project requirements, including surface treatment and packaging specifications.