Import A36 6mm Carbon Steel Sheet — Buy in wholesale FOB from Supplier in China

This A36 6mm carbon steel sheet from Jiangsu Steel Group Co., Ltd. is a thin-gauge structural plate supplied to ASTM A36 with widths from 1500 mm to 4200 mm and lengths from 6000 mm to 18000 mm. At 6 mm, it sits at the lighter end of the supplier's 8 mm to 600 mm nominal range, though the source description indicates capability below 8 mm. The sheet is available in coil or flat-sheet form, with surface options ranging from clean mill finish to shot-blasted or painted surfaces tailored to customer specifications.

ASTM A36 requires minimum yield strength of 250 MPa and tensile strength of 400-550 MPa, with typical elongation of 20% in 200 mm gauge length for material under 40 mm thick. For 6 mm sheet, the fine grain size and rolling reduction typically yield higher formability and better surface quality than heavier gauges. The supplier cross-lists equivalent grades including SS400, SM400B, S235JR, and Q235B, which share similar mechanical properties but differ in chemical limits and certification requirements. Standard industry thickness tolerance for 6 mm hot-rolled sheet is ±0.4 mm under ASTM A6 or ±0.3 mm under tighter EN 10051 agreements, though the supplier should confirm which standard applies.

The 6 mm gauge is widely used in automotive body panels, structural decking, storage tank shells, ductwork, and general fabrication where weight savings and ease of bending are prioritised over pure load-bearing capacity. Typical buyers include HVAC contractors, trailer manufacturers, agricultural equipment builders, and light structural fabricators. Trade terms are FOB, CFR, or CIF, with T/T or L/C at sight payment. Exact MOQ, coil weight, and lead time are not stated and must be confirmed directly with Jiangsu Steel Group Co., Ltd.

Jiangsu Steel Group Co., Ltd. is headquartered at 10/f No.257 Siping Road, Shanghai 200080, Hongkou, China, with its commercial operations based in Shanghai's Hongkou district. The supplier carries an imported-tier and harbor trust-tier classification, and both response rate and average response hours show zero, indicating limited or no active online inquiry management at the time of listing. No manufacturing site, founding year, employee count, or annual turnover is provided in the available profile data.

The company's product range covers carbon steel coils and sheets across a wide dimensional envelope, suggesting trading, stocking, or mill-agency activity rather than exclusive primary production. For buyers of 6 mm sheet, it is important to establish whether Jiangsu Steel Group Co., Ltd. holds inventory in Shanghai or nearby ports, or whether all material is mill-direct with correspondingly longer lead times. Verification of mill relationships, certificate authority, and export-licence status should be completed before contract execution, as these details are absent from the source description.