从China供应商批量进口90â°5d Bend With 3lpe

This 90°5D bend with 3LPE coating is a long-radius pipe fitting manufactured by WH-steel Co. Ltd. in Cangzhou City, Hebei Province, China. The bend conforms to a 5D centreline radius (five times the nominal pipe diameter) and is supplied with a three-layer polyethylene external anti-corrosion coating. Available manufacturing methods include seamless construction for sizes DN15 through DN700, and welded construction for sizes DN200 through DN2000. Wall thickness options span SCH10 through SCH160, XS, XXS, and high-thickness configurations up to 80mm. Material grades offered include A234 WPB, WP5, WP9, WP11, WP22; A420 WPL3 and WPL6; A403 WP304/L and WP316/L; and A860 WPHY grades 42-46, 52-60, and 65-70, with special alloys such as Monel, Inconel, Cu-Ni, and duplex stainless steel available on request.

The 3LPE coating system consists of an FBE primer, a copolymer adhesive layer, and a polyethylene topcoat, providing cathodic disbondment resistance and mechanical protection for buried or submerged pipelines. The bend angle is fixed at 90 degrees, with product classes spanning 2D through 6D to suit varied piping geometries. Face treatments beyond 3LPE include cement mortar lining, FBE coating alone, and hot-dipped or electro-plated galvanisation. Standard compliance covers ASME B16.49 and SY/T5257-2012, the latter being the Chinese petroleum industry standard for induction bends. The seamless and welded production routes allow flexibility across pressure classes and project economies, with thicker walls addressing high-pressure or sour-service demands.

Typical applications include oil and gas transmission pipelines, refinery process piping, chemical plant distribution systems, and water infrastructure where corrosion resistance and directional changes are both required. Buyers are mainly EPC contractors, pipeline operators, and stockist distributors serving energy and utility sectors. When sourcing from WH-steel Co. Ltd., importers should confirm the specific material grade, coating thickness to NPSA or DIN 30670, and whether inspection certificates to EN 10204 3.1 or 3.2 are available. The supplier's profile indicates a harbor trust tier with no recorded response rate, so direct enquiry is essential to establish MOQ, lead time, and Incoterms.

WH-steel Co. Ltd. is headquartered in Cangzhou City, Hebei Province, China, with a registered address also listed in Beijing. The company holds a harbor trust tier on the marketplace, indicating a baseline verification status. However, the response rate is recorded at 0.00 percent with zero average response hours, which suggests either a new listing, inactive account, or data capture issue rather than a definitive operational assessment. No information about year of establishment, production floor space, employee count, or annual turnover is provided in the source data, and these should not be assumed.

The supplier lists itself in the pipe fitting and steel product category, specialising in induction bends with multiple radius classes and corrosion-resistant coatings. Its geographic concentration in Cangzhou places it within China's largest cluster of pipe and fitting manufacturers, a region with extensive steel processing infrastructure. Buyers should treat the lack of response data as a signal to conduct thorough due diligence: request factory audit reports, ISO 9001 or API Q1 certification copies, and recent mill test certificates before committing to an trial order. The product range indicates capability across carbon steel, low-temperature steel, and exotic alloys, but specific capacity, typical monthly output, and whether bending is performed in-house or subcontracted are details that must be confirmed directly.