从China供应商批发进口8mm Carbon Steel Sheet — FOB条款

Jiangsu Steel Group Co., Ltd. offers 8mm carbon steel sheet in grades A283GR.C/GR.D, ASTM A36, A573GR.58, A573GR.65, A573GR.70, SS400, SM400A, SM400B, SM400C, S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S275N, S275NL, S275M, S275ML, 250, 250L0, 250L15, Q235A/B/C/D and Q275A/B/C/D. The material is supplied in thicknesses from 8mm up to 600mm, with widths spanning 1500mm to 4200mm and lengths from 6000mm to 18000mm. Surface finish is clean, with blasting and painting available according to customer requirement. The sheets conform to AISI, ASTM, BS, DIN, GB and JIS standards, giving buyers flexibility across international projects.

Carbon steel at this thickness is typically hot-rolled and offers structural integrity for load-bearing applications. The 8mm starting thickness sits at the lighter end of the supplier's range, which extends to 600mm for heavy plate demands. Grade selection depends on the required yield strength and weldability; ASTM A36 remains the most commonly specified grade for general structural use due to its balance of strength and formability. For projects requiring improved toughness at lower temperatures, the S275 series or normalized grades such as S275N provide better performance. The Q235 and Q275 Chinese grades align with equivalent European and American standards but buyers should verify mill certificates for specific chemical composition and mechanical test results.

Primary applications include building construction, bridge engineering, architectural metalwork, vehicle components, shipping structures, high-pressure containers, boilers and large steel structures. Buyers are typically structural fabricators, shipyards, pressure vessel manufacturers and infrastructure contractors. Trade terms offered are FOB, CFR and CIF. Payment is by T/T or L/C at sight. The supplier's address is listed as 10/F No.257 Siping Road, Shanghai 200080, Hongkou, China, though buyers should confirm current shipping origin and mill location directly.

Jiangsu Steel Group Co., Ltd. is registered at 10/F No.257 Siping Road, Shanghai 200080, Hongkou, China. The supplier carries a harbor trust tier and an imported supplier tier classification. The response rate is shown as 0.00% with an average response time of zero hours, which suggests either a new listing or inactive inquiry management. Buyers should test responsiveness directly before relying on quoted availability. No information is provided about mill ownership, annual tonnage capacity, or whether the company operates its own production facility or trades through third-party mills.

The listing does not state ISO certification, mill test certificate (MTC) provision, third-party inspection capability, or stockholding location. Buyers requiring EN 10204 3.1 or 3.2 certificates, SGS inspection, or specific packaging should confirm these points in initial correspondence. The breadth of grades and thicknesses offered implies either substantial inventory or mill-direct sourcing, but this should be verified rather than assumed.