从India供应商批发进口3304 Digital Ceramic Floor Tiles — FOB条款

The 3304 Digital Ceramic Floor Tiles from Azzaro Ceramic are 300 mm x 300 mm square floor tiles manufactured in Morbi, Gujarat, a centre of India's ceramic industry. These tiles employ digital printing technology to achieve detailed surface patterning with consistent colour reproduction across batches. The anti-skid surface finish is achieved through controlled glaze texture, reducing slip hazard in wet or high-traffic conditions. Azzaro Ceramic produces these for both residential and commercial installation, with the 300x300 mm format being a standard modular size for bathrooms, kitchens, and light commercial floors in India and export markets.

Ceramic floor tiles of this type are typically formed from refined clay bodies, fired at temperatures between 1,050 °C and 1,200 °C to achieve vitrification and mechanical strength. The digital printing process applies ceramic pigments directly onto the biscuit or glazed surface before final firing, enabling complex designs without the cost of rotary screen production. Standard water absorption for glazed ceramic floor tiles of this grade typically falls below 3% by mass, classifying them as impervious to moderately impervious under ISO 10545-3. Surface abrasion resistance, measured by PEI (Porcelain Enamel Institute) rating or EN 15433 deep abrasion test, determines suitability for residential versus commercial foot traffic; buyers should confirm the specific PEI class with Azzaro Ceramic.

Typical applications include residential bathrooms, kitchens, balconies, and light commercial retail or hospitality spaces where slip resistance and ease of cleaning are priorities. The 300x300 mm format allows efficient installation with reduced cutting waste on standard room dimensions. Importers should confirm with Azzaro Ceramic the exact glaze hardness, chemical resistance to common cleaning agents, and frost resistance if intended for outdoor or cold-climate use. Packaging is typically palletised with corrugated dividers; moisture-sensitive paper or film wrapping may be used for sea freight. Payment and Incoterms are not specified in the source data and must be negotiated directly with the supplier.

Azzaro Ceramic is located at 8-a, N.H. Way, near Solo Sanitary, in Morbi, Gujarat 363642, India. Morbi is the principal ceramic tile manufacturing cluster in India, accounting for a substantial share of national tile output. The supplier holds a Harbor trust tier, which represents a base-level marketplace verification. The response rate is recorded at 0.00% with zero average response hours, suggesting minimal or no historical buyer engagement through the platform. No factory size, year of establishment, export licence details, or quality certifications are stated in the available profile data.

The listing positions Azzaro Ceramic as a producer of 300x300 mm digital ceramic floor tiles with anti-skid properties for residential and commercial use. The source description mentions FOB and CIF as available Incoterms, and T/T and L/C as payment methods, though these should be treated as illustrative rather than committed terms until confirmed in direct negotiation. The supplier does not state specific production capacity, export experience by country, or third-party certifications such as ISO 9001, CE marking, or SASO compliance. Buyers should verify factory credentials, previous export references, and quality control documentation directly with Azzaro Ceramic before placing orders.