Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

304 stainless steel tiny wire from Jaway Steel Co., Ltd. is a precision-drawn fine wire manufactured to ASTM A580 standards, with a nominal composition of 18 percent chromium and 8 percent nickel. The wire is drawn from austenitic stainless steel billet and supplied in diameters spanning 0.1 mm to 3.0 mm, coiled on spools or supplied as continuous coil for automated feeding. Surface finish is bright-annealed or cold-drawn depending on the end-use requirement, with ovality and diameter tolerance controlled during multi-pass drawing through carbide or diamond dies.
The 18/8 chromium-nickel chemistry provides stable austenitic structure, giving the wire excellent resistance to intergranular corrosion and good formability in the annealed condition. Tensile strength varies with wire diameter and temper: annealed condition typically falls in the 500-700 MPa range, while cold-worked spring temper can exceed 1700 MPa for fine diameters. The material is non-magnetic in the fully annealed state, though cold working induces slight ferromagnetism. Standard packaging is on DIN 160 or DIN 200 plastic/metal spools, with coil weights from 5 kg to 25 kg typical, though Jaway Steel Co., Ltd. should confirm available spool sizes and coil weights for your diameter.
This grade of wire serves filtration media manufacturers, hose braiding operations, precision spring makers, and fastener producers. Automotive suppliers use it for ball bearing retainers and connector pins. Surgical instrument makers and kitchenware producers draw on its hygienic surface and passivation capability. Redrawing to even finer diameters is common, so verify with Jaway Steel Co., Ltd. whether the supplied temper is optimized for your downstream drawing schedule. The company also supplies annealed wire specifically for redrawing applications.
| Material Grade | AISI 304 / UNS S30400, 18% Cr, 8% Ni (per source data) |
| Applicable Standard | ASTM A580 (source-confirmed specification) |
| Diameter Range | 0.1 mm to 3.0 mm (source-confirmed supply range) |
| Diameter Tolerance | Typical: +/-0.005 mm for 0.1-0.5 mm; +/-0.01 mm for 0.5-1.0 mm (precision-drawn fine wire standard) |
| Tensile Strength, Annealed | Typical: 500-700 MPa (commodity standard for annealed 304 wire) |
| Tensile Strength, Spring Temper | Typical: 1700-2050 MPa for fine diameters (standard cold-worked spring wire range) |
| Surface Finish | Bright annealed or cold-drawn (source-indicated); confirm exact finish with supplier |
| Spool/Coil Packaging | Spools or coils (source-confirmed); typical coil weight 5-25 kg (standard industry range) |
| Magnetic Permeability | Typically non-magnetic when fully annealed; slight ferromagnetism after cold work (material standard) |
| Primary Applications | Filtration media, hose braiding, precision springs, fasteners, bearings, surgical equipment (source-listed uses) |
Jaway Steel Co., Ltd. is headquartered in Shanghai, China, with its registered address at Suite 15G, Yongrong Enterprise Center, No.1111 Liyang Road, in the Hongkou Area. The company was founded in 1998 and operates from a plant covering 18,000 square meters, employing 160 people including 19 technicians. Its business scope covers both stainless steel and carbon steel manufacture and exportation, positioning it as a full-line metal products exporter rather than a narrow specialty wire house.
The listing carries a harbor trust tier with a reported response rate of 0.00 percent and zero average response hours, which signals that buyer inquiries through this channel have not yet generated tracked replies. The supplier profile does not indicate third-party audit status, ISO certification, or specific export volume figures. Buyers should conduct direct due diligence on production capability, quality control protocols, and export documentation experience before committing to volume orders.
304 stainless steel tiny wire is a precision-drawn fine wire grade conforming to ASTM A580 standards, containing 18% chromium and 8% nickel for superior corrosion resistance. Commonly supplied in diameters from 0.1mm to 3.0mm on spools or coils, this wire is widely used in filtration media, hose braiding, precision springs, fasteners, and ball bearing components. It is a high-demand export commodity traded globally on stainless steel scrap and mill-equivalent basis, making it a key product category for international B2B buyers in the automotive, industrial manufacturing, and filtration equipment sectors.
| 企业类型 | Supplier |
| 成立年份 | Contact Supplier |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| 响应时间 | <4h |
| 响应率 | Contact Supplier |
Before ordering 304 stainless steel tiny wire from Jaway Steel Co., Ltd., verify that the supplier's actual production scope covers your exact diameter and temper requirement. The company operates a multi-product steel plant, so confirm they draw fine wire in-house rather than outsourcing to a subcontractor. Request material samples of your target diameter, measure with a micrometre across multiple points, and test a short length on your own equipment for feed behaviour and springback. Ask for customer references in your application segment, whether filtration, braiding, or precision springs, and verify their experience with your country's import documentation and standards compliance.
Logistics from Shanghai typically involve FOB Shanghai or CIF terms, though the source does not specify Incoterms. Sea freight to European or North American ports takes 25-40 days depending on routing and transshipment. The wire is dense and heavy, so freight cost per kilogramme is moderate, but spool packaging adds cube and may trigger chargeable weight calculations. Confirm with Jaway Steel Co., Ltd. their standard Incoterms, whether they have experience with your destination country's customs requirements, and what payment instruments they accept. Given the zero reported response rate, establish direct communication via multiple channels (email, telephone, video call) before transferring funds, and consider an initial inspection visit or third-party factory audit.
Quality assurance for precision wire imports requires incoming inspection protocols that go beyond visual check. Measure diameter at three points along each sample spool with a calibrated micrometre or laser gauge, and check ovality. Conduct a bend test or wrap test per ASTM A580 to verify ductility matches the stated temper. For critical applications, send samples to an independent laboratory for chemical analysis by spark OES and tensile testing per ASTM E8. Verify that surface is free of longitudinal scratches, die marks, or lubricant residue that could cause failure in fatigue applications. Retain pre-shipment inspection rights in your purchase order, and specify acceptance criteria for diameter tolerance, tensile strength, and surface condition to avoid disputes over subjective quality claims.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing 304 Stainless Steel Tiny Wire for your business, securing the right balance of quality and cost is essential. Jaway Steel Co., Ltd., a verified supplier based in China, offers this product with key specifications including 304 / AISI 304 / SUS 304 / EN 1.4301, C ≤ 0.08%, Cr 18-20%, Ni 8-10.5%, Mn ≤ 2%, Si ≤ 0.75%, and 0.1mm - 2.0mm diameter (tiny/fine wire). By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $20003500/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is actively traded under HS Code 7223.00, making it a staple in the Stainless Steel Wires sector with strong demand from importing countries worldwide.
Importing 304 Stainless Steel Tiny requires careful attention to shipping logistics, customs compliance, and secure payment terms. Jaway Steel Co., Ltd. offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 7223.00 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this 304 Stainless Steel Tiny has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Stainless Steel Wires category and connect with top-tier exporters on our comprehensive global B2B marketplace. Start your sourcing journey today.
Importing 304 Stainless Steel Tiny requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 7223.00 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for 304 Stainless Steel Tiny Wire from Jaway Steel Co., Ltd. is $20003500/Bags on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Jaway Steel Co., Ltd. through EximNext.
The supplier, Jaway Steel Co., Ltd., has set a Minimum Order Quantity (MOQ) of 1 Bags for 304 Stainless Steel Tiny. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
For international shipping and customs clearance, 304 Stainless Steel Tiny Wire is classified under HS Code 7223.00. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
To import 304 Stainless Steel Tiny from China, negotiate shipping terms (FOB, CIF, or EXW) directly with Jaway Steel Co., Ltd.. Ensure you have the necessary import licenses for Stainless Steel Wires products in your destination country.
Yes, Jaway Steel Co., Ltd. is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
The key specifications for 304 Stainless Steel Tiny Wire supplied by Jaway Steel Co., Ltd. include 304 / AISI 304 / SUS 304 / EN 1.4301, C ≤ 0.08%, Cr 18-20%, Ni 8-10.5%, Mn ≤ 2%, Si ≤ 0.75%, and 0.1mm - 2.0mm diameter (tiny/fine wire). For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
Jaway Steel Co., Ltd. offers 304 Stainless Steel Tiny with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
304 Stainless Steel Tiny is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Jaway Steel Co., Ltd. through our platform.
Jaway Steel Co., Ltd. maintains international quality certifications. These ensure that the 304 Stainless Steel Tiny meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Jaway Steel Co., Ltd. will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Jaway Steel Co., Ltd..
Discover more products in Stainless Steel Wires from verified suppliers worldwide.