从China供应商批发进口18in Dual Drive Ultra Ata Ide Hard Drive Cable — FOB条款

This 18-inch flat ribbon IDE cable from STC-Cable enables the connection of two ATA devices, such as hard disk drives or optical drives, to a single motherboard IDE port. It supports the ATA 66, ATA 100, and ATA 133 interface standards, allowing for data transfer rates up to 133 MB/s. The cable's 40-pin, 80-conductor design is standard for Ultra ATA/66 and faster interfaces, providing the necessary signal integrity for reliable performance.

The construction uses a flat ribbon-style cable, which is typical for IDE connections and helps with routing inside a computer case. The 18-inch (approximately 457 mm) length is a common size for internal desktop installations. This cable is designed to connect a Master and a Slave device on the same channel, a standard configuration for systems using the legacy Parallel ATA interface. The connector ends are typically keyed to prevent incorrect insertion.

System integrators, repair technicians, and buyers maintaining older computer hardware are the primary market for this cable. It is used to connect internal peripherals like CD-ROM drives, DVD-ROM drives, tape backup units, and Zip drives. When sourcing from STC-Cable in Shenzhen, buyers should confirm the exact pin configuration and ribbon cable thickness, as these can vary. The listed response rate for the supplier is currently zero, so direct communication to verify stock and minimum order quantities is essential before placing a bulk order.

STC-Cable is a supplier based in the Songgang district of Shenzhen, Guangdong, China, with the postal code 518105. The company is listed on the platform with a 'harbor' trust tier. However, its profile shows a response rate of 0.00% and an average response time of 0 hours, indicating that buyer inquiries may not be actively monitored through the platform's messaging system.

The supplier's listing for this IDE cable provides a functional product description but does not disclose details such as company history, production capacity, export experience, or client references. All trade and verification information must be established through direct contact outside of the platform's current response metrics. Buyers are advised to request company documentation and product certifications directly before proceeding with an order.