Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›The JMY6804 is a 13.56MHz RFID read/write module built on the NXP CL RC663 chip, supporting a broader protocol set than many comparable readers. It handles ISO 14443 A, ISO 14443 B, ISO 15693, ISO 7816 via two SAM slots, and NFC. The module measures 70mm x 50mm x 16.5mm, weighs approximately 120g, and communicates through USB HID, RS232C, UART, or IIC interfaces.
A key design feature is the ferrite plate beneath the antenna, which improves read performance in metal-adjacent environments, a common challenge in industrial and payment terminal installations. The RC663 chip supports EMV2010-level RF protocol capability, making this module relevant for payment and ticketing systems. Data flash memory is 512 bytes, and the module supports ISP (in-system programming) for firmware updates. Operating voltage is DC 5V (±10%) with a maximum power draw of 150mA.
This module is suited for buyers building payment terminals, transit validators, access control panels, or multi-standard identification systems. Jinmuyu Electronics Co., Ltd supplies the JMY6804 from Beijing, China. The listing does not include pricing, MOQ, or lead time, so buyers should negotiate these terms directly. The supplier's platform response rate is currently untracked, so allow extra time for initial correspondence.
| PCD Chip | NXP CL RC663 |
| Operating Frequency | 13.56 MHz |
| Supported Protocols | ISO 14443A, ISO 14443B, ISO 15693, ISO 7816, NFC |
| SAM Slots | 2 (supports T=0 and T=1 protocols) |
| Communication Interfaces | USB HID, RS232C, UART, IIC |
| Module Dimensions | 70mm x 50mm x 16.5mm |
| Weight | Approximately 120g |
| Power Supply | DC 5V (±10%) |
| Maximum Power Consumption | 150mA |
| Operating Distance | 70mm (M1 card typical, depends on card quality) |
| Data Flash Memory | 512 bytes |
| Operating Temperature | -25°C to +85°C |
| Storage Temperature | -40°C to +125°C |
| PCB Layers | 4 |
| Anti-Collision | Full function; configurable for multi-card or single-card mode |
| Auto Card Detection | Supported (default OFF, configurable) |
Jinmuyu Electronics Co., Ltd is located in Beijing, China (postal code 101100). The supplier holds a "harbor" trust tier on the platform, which is a basic listing classification. The platform shows a 0.00% response rate and 0 hours average response time, indicating no tracked buyer interactions through the marketplace.
The product listing for the JMY6804 is technically detailed, covering chip model, interface options, protocol support, and environmental ratings. However, the supplier profile does not disclose company history, manufacturing scale, export markets, or quality management certifications. Buyers should request business registration documents, ISO certificates if applicable, and export references before committing to large orders.
| 企业类型 | Supplier |
| 成立年份 | Contact Supplier |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| 响应时间 | <4h |
| 响应率 | Contact Supplier |
When sourcing the JMY6804, confirm which interface variant you need before ordering, as the listing states USB HID, RS232C, UART, and IIC are available "by order." Request the full datasheet including register-level command references, antenna design guidelines, and sample host application code. Verify whether the module ships with the ferrite plate pre-installed or if it is an optional accessory.
The listing does not specify lead time, packaging format, or export pricing. Ask Jinmuyu Electronics whether modules ship in anti-static packaging suitable for international transit, and confirm the HS code classification for 13.56MHz RFID modules to avoid customs delays. Beijing suppliers typically route shipments through Tianjin port or Beijing Capital Airport for air freight. Clarify Incoterms (FOB, CIF, or DDP) and payment terms before confirming a purchase order.
On receipt, test each module by verifying communication on all configured interfaces, checking read distance with ISO 14443 A/B and ISO 15693 reference cards, and confirming SAM slot functionality with a test smart card. Inspect the ferrite plate mounting and antenna solder points under magnification. For first-time orders, consider requesting a small sample batch for evaluation before scaling to production quantities.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
为业务采购13.56mhz Rfid Reader Module-Jmy6804时,质量与成本的平衡至关重要。Jinmuyu Electronics Co., Ltd是一家位于China的认证供应商,提供该产品用于国际出口。直接对接生产商或授权出口商,买家可以协商优惠的FOB价格(起价 $32.79/Bags),并高效管理大宗订单(最小起订量 1 Bags)。该产品在Electric Components行业占据重要地位、全球进口需求强劲。
进口13.56mhz Rfid Reader Modu需要关注物流运输、海关合规和安全付款条款。Jinmuyu Electronics Co., Ltd,提供整箱(FCL)或散箱(LCL)海运等灵活运输方案。国际 B2B 交易的常见付款方式包括信用证(L/C)、电汇(T/T)和付款交单(D/P)。所有交易和询盘均通过 EximNext 完成 — 一个为跨境贸易提供安全、高效支持的全球 B2B 贸易平台。
可靠的合作伙伴是进口业务成功的基石。本13.56mhz Rfid Reader Modu的供应商已通过平台认证。无论您是分销商、批发商还是采购经理,都可以放心索取免费报价、申请产品样品并完成大宗采购。EximNext 汇聚了 200 多个国家和地区的数千家认证生产商与出口商。浏览Electric Components类目下的同类产品,通过我们全方位的进出口交易平台对接顶级出口商。立即开启您的采购之旅。
进口13.56mhz Rfid Reader Modu需要关注物流运输、海关合规和安全付款条款。常见运输方案包括海运整箱(FCL)或散箱(LCL)。买家应在目的国核实进口关税。常见付款方式包括信用证(L/C)、电汇(T/T)和付款交单(D/P)。
Jinmuyu Electronics Co., Ltd当前针对13.56mhz Rfid Reader Module-Jmy6804的批发价格为 $32.79/Bags(FOB条款,发货地China)。价格可能根据订单数量、包装和目的港有所调整。如需最准确的批量报价,请通过 EximNext 直接向Jinmuyu Electronics Co., Ltd发送询盘。
供应商Jinmuyu Electronics Co., Ltd将13.56mhz Rfid Reader Modu的最小起订量(MOQ)定为 1 Bags。如需样品或更小批量的试订,请通过平台直接联系供应商询盘。
13.56mhz Rfid Reader Module-Jmy6804的 HS 编码分类取决于具体的规格和形态。请通过 EximNext 联系Jinmuyu Electronics Co., Ltd,获取准确的 HS 编码和目的国所需的清关文件。
从China进口13.56mhz Rfid Reader Modu时,可直接与Jinmuyu Electronics Co., Ltd协商运输条款(FOB、CIF 或 EXW)。同时请确保您在目的国具备进口Electric Components类产品所需的相关许可。
是的,Jinmuyu Electronics Co., Ltd是 EximNext 平台上的认证供应商。下单前您可以查看完整的公司资料、营业执照信息、认证资质以及出口历史。
如需完整的技术参数表或分析证书(COA),请通过 EximNext 直接向Jinmuyu Electronics Co., Ltd发送询盘。
Jinmuyu Electronics Co., Ltd为13.56mhz Rfid Reader Modu提供标准出口包装。针对大宗批发订单,还可能提供定制包装、贴牌(OEM/ODM)等服务。
13.56mhz Rfid Reader Modu在全球范围内均有活跃的进口需求。可通过平台向Jinmuyu Electronics Co., Ltd索取特定目的地的 CIF 或 CFR 报价。
Jinmuyu Electronics Co., Ltd持有国际通行的质量认证,确保13.56mhz Rfid Reader Modu符合跨境贸易所需的国际质量、安全和监管标准。
点击本页面的"索取报价",填写所需数量、运输条款和目的国。Jinmuyu Electronics Co., Ltd将提供详细的批发报价,包含FOB价格、交货周期和支付方式。
发掘 Electric Components 类目下来自全球认证供应商的更多产品。