从China供应商批发进口1070 Coated Aluminum Sheet — FOB条款

Mirach Metallurgy's 1070 coated aluminum sheet is a commercially pure aluminium product with a minimum 99.70% Al content, supplied in tempers from O (annealed) through H12, H14, H16, H18, H22, H24, H26, H28, H32, H34, and H36. Sheet thicknesses range from 0.08 mm to 6.0 mm, with a common production window of 1.0 to 3.0 mm and a thickness tolerance of ±3%. The coating layer is applied to a maximum width of 2,600 mm and is specified at a minimum of 18 µm for polyester (PE) paint, 25 µm for PVDF, and 5 µm for primer, each with a ±0.002 mm tolerance.

The 1070 alloy offers excellent corrosion resistance, good formability, and sufficient elongation and tensile strength for conventional stamping and deep-drawing operations. It is not heat-treatable and has limited machinability, but accepts gas and contact welding readily. Mirach applies coatings from recognised paint brands such as Beckers and PPG, with options including standard PE, PVDF, Nano PVDF, and FEVE finishes. Typical industry specifications for this alloy conform to ASTM B209M, BS EN 485-2, BS EN 573-3, GB/T 3880-2008, and YS/T 429.2-2000.

Buyers in the construction and building-materials sector use this sheet for roofing panels, floor panels, ceiling and cladding walls, partition walls, shutters, window blinds, road-marking plates, and highway barrier panels. Mirach states a minimum order quantity of 5 metric tonnes per specification. When submitting an inquiry, the supplier requests alloy and temper, sheet dimensions, coating requirements, and intended end-use. Packaging uses protective interleaving on wooden pallets treated for fumigation, suitable for sea freight.

Mirach Metallurgy Co., Limited operates from Chongqing, China, at an address in the North Bank Sun Town complex. The supplier is listed on the harbour trust tier, indicating a baseline level of platform verification. The listing shows a 0% response rate and no recorded average response time, which means buyers should allow additional time for initial contact or follow up through alternative channels provided by the supplier.

The product listing describes Mirach as a coating specialist for aluminium sheet products, referencing 'Mirach Coating' as a division or brand. The profile does not disclose founding year, headcount, production capacity, revenue, or client names. Buyers should request documentation of quality certifications, recent third-party inspection reports, and a production schedule before committing to an order.