About Zhuhai Cdhlighting Co., Ltd. - Automobile Bulbs, Lights & Lamps Supplier in China

Zhuhai, China hosts Zhuhai Cdhlighting Co., Ltd., which currently lists five active products across its automotive lighting portfolio. The supplier’s catalogue covers automobile bulbs, lights and lamps, LED components, electric chokes and ballasts, as well as projector accessories. Its product set includes a hot car fog light bi‑xenon projector HID lens, a 12 V 55 W slim HID xenon ballast, a 2.5‑inch 35 W dual HID projector, a 3.0‑inch HID projector lens, and a wholesale 3.0‑inch bi‑xenon HID projector lens. The listed items fall under HS chapters 9405 (parts of lamps) and 8539 (optical devices).

Two of the five items carry explicit HS codes: the Oem Cdh‑933 12 V 55 W slim HID xenon ballast is classified under 9405.40 and is built on a PCB composite with MOSFETs and transformers; the 3.0‑inch HID projector lens uses optical‑grade polycarbonate or borosilicate glass and is recorded under 8539.49. The wholesale 3.0‑inch bi‑xenon HID lens also uses a glass lens, aluminum reflector housing and polycarbonate cover, and shares the 9405.40 code. The remaining products - the hot car fog light bi‑xenon projector lens and the 2.5‑inch dual HID projector - are described without HS codes but belong to the same lamp‑assembly families. All items target automotive headlamp and projector applications.

Product Range and Specialties of Zhuhai Cdhlighting Co., Ltd.

The catalogue focuses on HID projection optics and xenon ballast assemblies. The 3.0‑inch and 2.5‑inch projector lenses are typically made from optical‑grade polycarbonate or borosilicate glass, offering a beam spread suited to low‑beam and fog‑light applications, and are often supplied with aluminum reflector housings to meet IEC 60598‑2‑22 requirements. Xenon ballasts such as the 12 V 55 W slim unit are built on PCB composites with MOSFET switching and transformer isolation, delivering stable voltage spikes of 20‑30 kV for bi‑xenon discharge, a common specification in automotive headlamp systems.

In the broader automotive lighting sector, LED modules and electric chokes are evaluated against standards such as IEC 60598, E‑Mark for vehicle‑type approvals, and RoHS limits on hazardous substances. Typical grades for HID lenses include a transmission of >85 % and a surface flatness within 0.2 mm, while ballasts are tested for ripple voltage, thermal stability, and electromagnetic compatibility (EMC) per CISPR 25. Buyers often request material safety data sheets for the polycarbonate or glass components and confirm that the PCB assembly complies with UL 60950‑1 or equivalent.

Trade and Export Information - Zhuhai Cdhlighting Co., Ltd.

China is a major exporter of automotive lighting components, with shipments of HID lenses, xenon ballasts and projector accessories directed to vehicle manufacturers in Europe, North America and Southeast Asia. HS code 9405.40 covers lamp parts such as ballasts and lens assemblies, while 8539.49 applies to optical devices like projector lenses; customs authorities in importing countries frequently request CE marking or E‑Mark certification to verify compliance with vehicle type‑approval regulations. Export consignments are commonly packed in 20‑ft or 40‑ft containers using double‑wall cardboard or wooden crates, with moisture‑resistant liners to protect polycarbonate parts during sea transit.

Buyers typically require pre‑shipment inspection reports, IEC photometric test data and, where applicable, RoHS compliance certificates. Chinese manufacturers often work with freight forwarders to provide CIF or FOB terms, and the standard lead time for HID projector lenses and ballasts ranges from 30 to 45 days after order confirmation, depending on production scheduling and required testing.

Sourcing from Zhuhai Cdhlighting Co., Ltd. - Buyer Guidance

When sourcing HID projector lenses or xenon ballasts, request the latest IEC 60598 test report, photometric curves (luminous flux and beam pattern), and material safety data sheets for polycarbonate or glass components. Verify that the supplier can provide CE or E‑Mark certificates, as well as RoHS compliance documentation, before finalizing the order. It is advisable to obtain a physical sample to assess lens transmission, coating quality and reflector alignment, and to confirm that the ballast meets ripple voltage and thermal rise specifications.

Buyers should also confirm the HS code used for customs clearance matches the product description (9405.40 for lamp parts, 8539.49 for optical devices) and clarify packaging dimensions to ensure efficient container loading. Clarify the minimum order quantity, typical production lead time (approximately 30‑45 days), and preferred Incoterm (FOB Zhuhai or CIF to the destination port) to align logistics and cost planning.

What automotive lighting products does Zhuhai Cdhlighting list?

The supplier lists five products: a hot car fog light bi‑xenon HID projector lens, a 12 V 55 W slim HID xenon ballast, a 2.5‑inch 35 W dual HID projector, a 3.0‑inch HID projector lens, and a wholesale 3.0‑inch bi‑xenon HID projector lens.

Which HS codes are associated with the listed items?

Two products carry HS codes: the slim HID xenon ballast is under 9405.40 and the 3.0‑inch HID projector lens is under 8539.49. The wholesale 3.0‑inch bi‑xenon lens also uses 9405.40.

What materials are used for the projector lenses?

The lenses are made from optical‑grade polycarbonate or borosilicate glass, with some variants featuring an aluminum reflector housing and a polycarbonate cover.

What certifications should a buyer request for these automotive lighting components?

Buyers should request CE or E‑Mark approval for vehicle‑type compliance, RoHS conformity for hazardous substances, and IEC 60598 test reports for photometric performance.

What are typical minimum order quantities and lead times?

Typical minimum order quantities range from a few hundred units per SKU, and production lead times are generally 30 to 45 days after order confirmation, depending on the specific lens or ballast.

How are the products packaged for export?

Exports are usually packed in double‑wall cardboard boxes or wooden crates with moisture‑resistant liners, sized to fit standard 20‑ft or 40‑ft containers for efficient loading.

Which markets commonly import these types of HID projectors and ballasts?

Key import markets include Europe (Germany, France), North America (USA, Canada), and Southeast Asian automotive hubs such as Thailand and Malaysia, where OEMs integrate them into vehicle lighting systems.

What documentation is needed for customs clearance?

Customs clearance typically requires a commercial invoice, packing list, the correct HS code (9405.40 or 8539.49), and any applicable CE/E‑Mark certificates or test reports.