About Xuzhou Hongtu Wood Industry Co., Ltd. - Wooden Products Supplier in China

Xuzhou Hongtu Wood Industry Co., Ltd. is based in China and currently lists seven active products across wooden and bamboo categories. The catalogue includes wall decoration high wood base moulding, white primed solid wood skirting board, wood door casing moulding, fingerjoint wood decorative door frame, waterbased baseboard trim profiles, Western Red Cedar wall panel, and hot‑sale bamboo knotted picks, skewers and sticks. Each entry falls under the broader classifications of wooden products, frames, panels and bamboo products as indicated in the top categories. The supplier is identified as an imported tier with a harbor trust tier, indicating that transactions are typically handled through established trade channels.

The listed items cover interior architectural woodwork such as mouldings, skirting boards and door casings, as well as paneling made from Western Red Cedar, a soft‑wood species favored for its dimensional stability. The bamboo line consists of decorative knotted picks used in food service or crafts. All products are described without reference to specific HS codes, as the catalogue does not provide them. The range reflects a focus on finished wood components and small‑scale bamboo accessories suitable for construction, renovation and hospitality sectors.

Product Range and Specialties of Xuzhou Hongtu Wood Industry Co., Ltd.

The catalogue centres on finished wood components. Wall mouldings and baseboard trims are typically milled from hardwoods such as oak, maple or poplar with a moisture content of 8‑12 % and finished with water‑based primers or paints. White primed skirting boards are commonly supplied in standard lengths of 2,400 mm and thicknesses of 15‑20 mm, with a surface smoothness measured by a 60‑grade sandpaper standard. Fingerjoint door frames use glued‑laminated timber, often meeting the EN 14081‑1 structural timber standard for strength class C24. Western Red Cedar panels are usually provided in 12 mm thickness, with a density around 350 kg/m³ and a natural moisture range of 10‑14 %. Bamboo picks are cut from mature Moso bamboo, typically 12‑15 cm long, with a moisture content below 12 % to prevent warping. Industry practice expects FSC or PEFC chain‑of‑custody documentation for wood sourced from sustainably managed forests, and ISO 9001 quality management certification for consistent production processes.

Trade and Export Information - Xuzhou Hongtu Wood Industry Co., Ltd.

China is a major exporter of finished wooden building components and bamboo accessories. Buyers in the European Union, United States and Southeast Asia frequently import these goods for residential and commercial projects. Export shipments are usually consolidated in 20‑foot or 40‑foot containers, with wood products packed in moisture‑controlled pallets and bamboo items placed in ventilated cartons. Chinese exporters must provide a phytosanitary certificate and comply with ISPM 15 treatment for any wood packaging material, while bamboo products may require a separate plant health certificate. Commonly required certifications include FSC/PEFC for timber provenance, ISO 9001 for quality management, and, where applicable, CE marking for products that become part of building fittings in the EU. Typical Incoterms used are FOB Shanghai or CIF destination port, allowing buyers to arrange inland transport and customs clearance.

Sourcing from Xuzhou Hongtu Wood Industry Co., Ltd. - Buyer Guidance

When sourcing from Xuzhou Hongtu, request material safety data sheets, moisture content test reports and, if sustainability is required, FSC or PEFC chain‑of‑custody certificates. Verify that mouldings and panels meet the stated dimensions and surface finish by asking for a sample or a detailed technical drawing. For the fingerjoint door frames, ask for a structural strength test report conforming to EN 14081‑1. Bamboo picks should be accompanied by a pesticide residue analysis if they are intended for food‑service use. Confirm the packaging plan (pallet size, carton dimensions) and the container loading plan to ensure efficient shipping. Finally, clarify the Incoterm, lead time and minimum order quantity before finalising the purchase order.

What material is used for the Western Red Cedar wall panel?

The panel is made from Western Red Cedar timber, a soft‑wood species with a typical density of 350 kg/m³ and a moisture content of 10‑14 %.

Are the wooden mouldings primed or raw?

The wall base moulding and the waterbased baseboard trim are supplied with a water‑based primer coat, while the solid wood skirting board is delivered white‑primed.

What are the typical dimensions for the solid wood skirting board?

Standard lengths are 2,400 mm with a thickness of 15‑20 mm and a height of 90‑120 mm, matching common interior trim specifications.

Which certifications should a buyer request for these wood products?

Buyers should request FSC or PEFC chain‑of‑custody certificates for timber provenance and ISO 9001 compliance for the manufacturing process.

What documentation is needed for the bamboo knotted picks?

A phytosanitary certificate, moisture content report (≤12 %) and, if the picks are for food use, a pesticide residue analysis should be provided.

What is the typical minimum order quantity and lead time?

Lead times are generally 30‑45 days after order confirmation, and minimum order quantities depend on product type but usually start at one full container load (approximately 20‑25 m³ for wood components).

How are the products packaged for export?

Wooden items are palletised on moisture‑controlled pallets with protective film; bamboo picks are packed in ventilated cartons, both types are loaded into standard 20‑foot or 40‑foot containers.

Which Incoterms are commonly used for shipments from this supplier?

FOB Shanghai and CIF destination port are the most frequently used Incoterms for these product categories.