About Vic Cans Australia - Packaging Supplier in Australia

Australia‑based Vic Cans Australia lists five active products in its current catalogue. The catalogue is organised under the top categories “Packaging Items & Containers” and “Packaging Drums & Barrels”, covering metal drums and pails ranging from 5 L to 21 L capacity. Each item is described by its external finish - white paint - and interior condition, such as plain or Palin‑lined, indicating a basic protective coating for non‑food liquids. The product titles include a 5 L metal solvent drum, three metal pails of 10 L, 12 L and 21 L with various lid configurations, and an additional 10 L metal pail without interior detail. The supplier’s catalogue therefore focuses on small‑volume metal containers suitable for industrial liquids, chemicals or lubricants.

The five listed items reflect standard metal packaging formats that are widely used in bulk handling and secondary storage. While the catalogue does not provide HS codes, the capacities and construction types correspond to common steel drum families that are exported from Australia to manufacturers and distributors worldwide. Vic Cans Australia’s product set is therefore positioned for buyers needing compact, durable metal containers for domestic or export supply chains.

Product Range and Specialties of Vic Cans Australia

The catalogue offers a 5 L metal solvent drum with a white exterior and plain interior, a 10 L metal pail with white exterior and Palin‑lined interior, a 12 L metal pail with the same finish, a 21 L metal pail with lid, and a second 10 L metal pail without interior detail. In the metal packaging industry, such drums and pails are typically fabricated from cold‑rolled steel with a wall thickness of 0.8 - 1.2 mm and finished with a powder‑coat or enamel paint for corrosion resistance. Common grades include ISO 20857‑type drums, which meet UN 21 specifications for non‑hazardous liquids, and pails that conform to ASTM D7968 for capacity and durability. Buyers often request information on inner coating type (e.g., Palin, PE, or epoxy), lid sealing mechanisms, and compliance with food‑grade or chemical‑resistant standards depending on the end use.

Trade and Export Information - Vic Cans Australia

Australian manufacturers of metal drums and pails export primarily to the Asia‑Pacific region, North America and Europe, where the construction, chemical, automotive and paint industries import such containers in bulk. The typical HS‑chapter for steel drums and pails is 73, and customs authorities often require documentation of material composition, weight and compliance with UN 21 or ISO 20857 standards. Importers usually request certificates such as ISO 9001 for quality management, ISO 14001 for environmental compliance, and where applicable, CE marking or FDA compliance for food‑contact interiors. Logistics for 5 - 21 L metal containers generally involve palletised shipments in 20‑ft or 40‑ft containers, with FOB or CIF terms being the most common incoterms used by Australian exporters.

Sourcing from Vic Cans Australia - Buyer Guidance

When sourcing from Vic Cans Australia, buyers should obtain a product data sheet that confirms steel grade, wall thickness, coating type and lid sealing specifications. Requesting a third‑party test report for corrosion resistance, interior coating adhesion and UN 21 compliance helps verify suitability for chemical or lubricating oil applications. Typical minimum order quantities for metal drums of this size range from 200 to 500 units, with lead times of 2 - 4 weeks after order confirmation, depending on coating and lining requirements.

What capacities are available in Vic Cans Australia’s metal drum and pail range?

The catalogue lists metal containers of 5 L, 10 L (two variants), 12 L and 21 L capacity. Each product is described by its external white paint finish and interior condition, such as plain or Palin‑lined.

Are the metal drums suitable for storing solvents?

The 5 L metal solvent drum is specified with a plain interior, which is typical for non‑corrosive solvents. Buyers should verify the inner coating if the solvent is aggressive or requires a specific barrier.

What coating options are offered for the interior of the pails?

The catalogue mentions a Palin‑lined interior for the 10 L and 12 L pails. Palin is a polymer coating that provides basic moisture resistance; alternative coatings such as PE or epoxy can be negotiated with the supplier.

Which certifications should a buyer request for these metal containers?

Buyers commonly request ISO 9001 quality‑management certification, ISO 14001 environmental certification, and, where relevant, UN 21 compliance documentation for non‑hazardous liquid transport.

What are the typical packaging and shipping methods for these items?

Metal drums and pails of 5 - 21 L are usually palletised and loaded into 20‑ft or 40‑ft containers. Standard incoterms used by Australian exporters include FOB and CIF.

What is the usual lead time and minimum order quantity?

Lead times are generally 2 - 4 weeks after order confirmation, depending on coating and lining requirements. Minimum order quantities commonly range from 200 to 500 units per product size.