About Taizhou Double World Plastic&Mould Co., Ltd. - Plastic Products Supplier in China

Taizhou Double World Plastic&Mould Co., Ltd. is based in China and currently lists seven active products across four categories: Plastic Products, Plastic Scrap, Plastic Moulds and Canned Vegetables. The catalogue includes a 48‑cavity PET preform mold for automotive applications, standard PE handles, a 30 mm PE handle designed for PET bottles, a gallon‑size PET preform, an 8‑cavity flip‑cap mold, and a plastic chair mould for furniture production. Each entry reflects a specific tooling or component used in downstream packaging or furniture manufacturing, and the product titles indicate the cavity count or target application where applicable.

The supplier’s product set covers both mould tooling (preform and flip‑cap molds, chair furniture mold) and finished plastic components (PE handles, PET preforms). No additional categories such as raw plastic scrap or canned vegetables are detailed in the product list, although they appear in the broader category classification. The active product count of seven suggests a focused portfolio rather than a broad line‑up, which can simplify supplier evaluation for buyers seeking specific mould designs or PET preform specifications.

Product Range and Specialties of Taizhou Double World Plastic&Mould Co., Ltd.

The catalogue shows moulds for PET preforms with 48 cavities for automotive bottle applications and an 8‑cavity flip‑cap mould, both typically machined from hardened steel to meet tolerances of ±0.1 mm on cavity dimensions. In the PET preform market, standard grades such as PET‑G (glycol‑modified) are used for beverage bottles, with wall thicknesses ranging from 0.5 mm to 1.2 mm and neck finishes compatible with 28 mm or 38 mm threads. PE handles listed are generally produced from high‑density polyethylene (HDPE) meeting melt flow index (MFI) 0.5 - 2.0 g/10 min, suitable for food‑contact applications. A 30 mm PE handle for PET bottles corresponds to typical ergonomic dimensions for 500 ml to 1 L containers, and the handle’s snap‑fit design often requires a tolerance of ±0.05 mm on the insertion depth.

The plastic chair mould indicates capability in larger‑scale furniture moulding, where injection‑moulded polypropylene (PP) or ABS are common. Industry standards for such furniture moulds include a surface finish of Ra ≤ 3.2 µm and a cycle time of 20 - 30 seconds for a 200 kg part. Buyers in the furniture sector often request a draft angle of at least 1° and a cooling time sufficient to achieve dimensional stability within ±0.2 mm.

Trade and Export Information - Taizhou Double World Plastic&Mould Co., Ltd.

China is a leading exporter of injection‑moulded plastic components and mould tooling, with major destination markets in Southeast Asia, the European Union, North America and the Middle East. Export shipments of PET preform moulds and related tooling typically use 20‑foot containers that can accommodate up to 12 mould sets, depending on size, while finished PET preforms are shipped in bulk boxes of 1 kg or 5 kg, fitting up to 1,200 units per container. Buyers importing plastic moulds often require compliance with ISO 9001 quality management and, for food‑contact parts, certification such as FDA Food Contact Material (FCM) or EU Regulation No 1935/2004.

Standard trade documentation includes a commercial invoice, packing list, certificate of origin and, where applicable, a material safety data sheet (MSDS) for the plastic resin. Incoterms most frequently used are FOB Tianjin or Shanghai, with buyers arranging ocean freight to ports such as Rotterdam, Los Angeles, or Jebel Ali. Importers should verify that the moulds meet the destination country’s safety standards, for example CE marking for equipment used in the EU or UL listing for the United States.

Sourcing from Taizhou Double World Plastic&Mould Co., Ltd. - Buyer Guidance

When sourcing PET preform moulds, buyers should request a detailed technical drawing that includes cavity layout, sprue and runner dimensions, and the steel grade (e.g., H13 or P20). A sample preform produced on the mould can confirm dimensional accuracy, wall thickness tolerance and surface finish before committing to full‑scale production. For PE handles and flip‑cap moulds, ask for a material declaration confirming HDPE or PP grade, MFI value, and any food‑contact certifications the supplier can provide.

Typical verification steps include reviewing an ISO 9001 certificate (if held), requesting a recent factory audit report, and confirming the presence of an FDA or EU food‑contact compliance statement for components destined for beverage packaging. Buyers should also clarify the minimum order quantity (MOQ) for mould production, which often ranges from a single custom mould to batch orders of 5 - 10 units, and negotiate lead times that can vary from 45 days for standard moulds to 90 days for high‑cavity custom designs.

What types of moulds does Taizhou Double World offer?

The supplier lists a 48‑cavity PET preform mould for automotive bottles, an 8‑cavity flip‑cap mould, and a plastic chair mould for furniture applications.

Can I obtain a sample of a PET preform before ordering the mould?

Buyers can request a pilot run on the mould to produce a sample preform, which allows verification of dimensions, wall thickness and surface finish before full production.

Which material grades are used for the PE handles?

The PE handles are typically manufactured from high‑density polyethylene (HDPE) with a melt flow index between 0.5 and 2.0 g/10 min, suitable for food‑contact packaging.

What certifications should I ask for when importing food‑contact plastic components?

Commonly required certifications include FDA food‑contact approval, EU Regulation 1935/2004 compliance, and an ISO 9001 quality management system certificate.

What are the usual lead times for custom mould production?

Standard lead times range from 45 days for off‑the‑shelf designs to about 90 days for high‑cavity custom moulds such as the 48‑cavity PET preform mould.

What packaging is used for shipping PET preforms and plastic handles?

PET preforms are usually packed in cardboard boxes of 1 kg or 5 kg, while PE handles are shipped in bulk poly‑bags or stacked in wooden crates, both secured for ocean freight.

Which Incoterms are most commonly used with this supplier?

Buyers typically see FOB terms from major Chinese ports such as Shanghai or Tianjin, allowing the buyer to arrange freight and insurance.

Is there a minimum order quantity for the plastic chair mould?

The supplier generally requires a minimum order of one custom mould, but production runs of the finished chairs often start at 100 units per batch.