About Surgident - Dental Equipments & Materials Supplier in South Korea (Republic Of Korea)

South Korea (Republic Of Korea) is the origin of Surgident, which currently lists 25 active products across Dental Equipments & Materials and Surgical Equipments & Disposables. The catalogue covers items such as torque devices, removal kits, handpiece applicators and a variety of dental instruments, each classified under HS Chapter 90 with codes 9018.41, 9018.49 or 9018.90. The product titles include Sd‑torque, Korean Toca Kit, Fixture And Screw Remover Kit, Dental Root Picker and Generic Instrument Needle Holder, among others. All entries specify the material composition, ranging from surgical stainless steel to titanium alloy Grade 5, and align with the standard HS‑code families for surgical instruments.

The listed materials comprise surgical‑grade stainless steel (including AISI 304, 316L, 420 and 440 series) and titanium alloy Ti‑6Al‑4V, which are common in medical device manufacturing. Product types span torque‑controlled handpieces, extraction kits, bone collectors, curettes, elevators, scalers and needle holders, each designed for dental or oral‑surgical procedures. The HS codes 9018.41 identify hand‑held surgical instruments, while 9018.49 covers other surgical instruments and 9018.90 pertains to miscellaneous medical instruments. This composition reflects the typical material and coding structure for precision dental and surgical tools.

Product Range and Specialties of Surgident

Surgident’s catalogue includes torque‑controlled handpieces (Sd‑torque, SD Torqueless), multiple removal kits (Fixture And Screw Remover Kit, Ultimate Crestal & Lateral Kit), bone collection systems (Never Loss Bone Collector KIT) and a full set of dental elevators, curettes, periotomes and scissors. In the industry, such instruments are normally produced from AISI 304/316L stainless steel meeting ASTM F138, or from Ti‑6Al‑4V which conforms to ISO 5832‑3. Typical quality grades for dental handpieces require a torque range of 0‑35 N·cm and a surface finish of Ra < 0.8 µm. The stainless‑steel components are often passivated to enhance corrosion resistance, and titanium tips are usually anodized for additional hardness. Buyers generally expect CE marking or ISO 13485 certification for these categories, along with material certificates that confirm compliance with the relevant ASTM or ISO standards.

Trade and Export Information - Surgident

South Korea is a major exporter of precision medical instruments, and its surgical and dental tools are regularly shipped to the United States, European Union, Japan, Saudi Arabia and other Gulf Cooperation Council markets. The HS‑code 9018.41 is used for hand‑held surgical instruments such as handpieces, while 9018.49 covers a broad range of dental and surgical instruments, and 9018.90 applies to miscellaneous medical devices like needle holders. Importers typically require a CE Declaration of Conformity for EU shipments, ISO 13485 quality‑management certification, and, where applicable, FDA 510(k) clearance for the United States. Standard export packaging involves double‑packed sterile barrier pouches placed in sealed medical‑grade cartons, which are then loaded into 20‑ft or 40‑ft containers under CIF or FOB terms. Export controls in South Korea mandate compliance with the Medical Devices Act and relevant customs documentation for HS Chapter 90 items.

Sourcing from Surgident - Buyer Guidance

When sourcing from Surgident, buyers should request material test reports confirming chemical composition, tensile strength (e.g., ≥520 MPa for 316L stainless steel) and corrosion resistance (ASTM A967). A current ISO 13485 certificate, CE Declaration of Conformity and any applicable FDA 510(k) documentation should be verified before order confirmation. Samples should be requested in the same material grade and finish as the production batch, and buyers should confirm the sterilization method (gamma, EO or steam) used for the final product. Verifying these documents helps ensure the instruments meet the regulatory and performance standards required by hospitals and dental clinics worldwide.

What product categories does Surgident offer?

Surgident lists 25 items under Dental Equipments & Materials and Surgical Equipments & Disposables, including torque devices, removal kits, elevators, curettes, needle holders and other hand‑held instruments. All items fall under HS Chapter 90, primarily codes 9018.41, 9018.49 and 9018.90.

Which materials are used in Surgident’s instruments?

The catalogue specifies surgical‑grade stainless steel (AISI 304, 316, 420, 440C) and titanium alloy Grade 5 (Ti‑6Al‑4V). These alloys meet ASTM F138, ISO 5832‑1 and ISO 5832‑3 standards commonly required for medical devices.

What certifications should a buyer verify for these instruments?

Buyers should request the supplier’s ISO 13485 quality‑management certificate, a CE Declaration of Conformity for the relevant EU directives, and material test certificates covering composition and tensile strength. For imports into the United States, FDA 510(k) clearance may also be required.

How are the instruments packaged for export?

Standard practice is to pack each instrument in a sterile barrier pouch, then group the pouches in sealed medical‑grade cardboard boxes. For bulk shipments the boxes are loaded into 20‑ft or 40‑ft containers, typically under CIF or FOB Incoterms.

What are typical minimum order quantities and lead times?

Minimum order quantities are generally around 500 units per item, although smaller batches can be arranged after confirmation. Lead time after order confirmation and receipt of payment is usually 4‑6 weeks, depending on the specific kit.

How can a buyer request a sample?

Buyers can request a pre‑shipment sample by specifying the exact product name and material grade; the supplier will provide the sample in the same packaging and sterilization condition as the production batch, together with the relevant material certificates.

What testing is performed on the stainless‑steel instruments?

Instruments are commonly tested for corrosion resistance (ASTM A967), surface roughness (Ra < 0.8 µm) and tensile strength (minimum 520 MPa for 316L). Test reports are usually supplied with the shipment.

Which markets import these types of Korean surgical instruments?

Major importers include the United States, European Union members, Japan, Saudi Arabia and other Gulf Cooperation Council countries, where hospitals and dental clinics seek CE‑marked or FDA‑cleared devices.