About Sunbeam Exports - Metal Products Supplier in India

Sunbeam Exports operates from India and currently lists ten active products spanning the metal products, wheelbarrow and metal castings & forgings categories. The catalogue includes galvanized brass vents, galvanized adjustable fittings, luggage straps, hole‑saw cutters, a boxer wheelbarrow, a heavy‑duty wheelbarrow, bucket handles, handle ends and sheet‑metal stamping. Items with HS codes fall under chapter 73 (metal articles) for 7308.90 and 7326.90 and chapter 83 (base metal fittings) for 8302.49. Material data specify hot‑dip galvanized steel with a zinc coating of Z275 g/m², stainless steel grades 201 and 304, brass CZ121, mild steel variants, carbon steel, stainless steel and aluminum grades as required for each application.

The product list shows a focus on corrosion‑protected steel components and assorted metal fittings, with the wheelbarrow line representing both standard and heavy‑duty designs. Sheet‑metal stamping is classified under HS 7326.90 and may involve carbon steel, stainless steel or aluminum depending on the end use. The presence of brass handle ends (HS 8302.49) indicates a range that includes both decorative and functional brass parts. All items are described with material grades rather than performance claims, providing a clear technical baseline for buyers.

Product Range and Specialties of Sunbeam Exports

Sunbeam Exports’ catalogue covers typical metal‑working outputs such as hot‑dip galvanized steel parts, stainless steel handles and brass fittings. In the industry, galvanized steel components are commonly produced to ASTM A123 or EN ISO 1461 standards, with a minimum zinc coating thickness of 275 g/m² (approximately Z275) to achieve corrosion resistance in outdoor or industrial environments. Brass ends listed as CZ121 correspond to the C260 brass alloy, which offers good machinability and moderate strength, and are often supplied with a tolerance of ±0.05 mm on critical dimensions. Stainless steel handles in grades 201 and 304 meet DIN 1.4301 specifications, where grade 304 is the most widely used austenitic steel for its corrosion resistance and grade 201 provides a cost‑effective alternative for non‑critical applications. Wheelbarrow frames typically employ steel tubing with load‑bearing capacities ranging from 100 kg for standard models to 200 kg for heavy‑duty versions, and sheet‑metal stamping can be produced in thicknesses from 0.5 mm to 3 mm depending on the part geometry.

Trade and Export Information - Sunbeam Exports

India is a major exporter of metal castings, forged components and galvanized steel products, with primary markets in the United States, European Union, Middle East and Southeast Asia. The HS‑code families present in Sunbeam Exports’ list - 7308.90 (ventilation and similar articles of iron or steel), 7326.90 (other articles of iron or steel) and 8302.49 (other base metal fittings) - are routinely inspected under customs regimes that require material certificates, country‑of‑origin statements and, where applicable, compliance with ISO 9001 quality‑management systems. Buyers often request CE marking or RoHS conformity for components destined for the EU, while North American importers may look for ASTM or ANSI references. Typical packaging includes double‑wall corrugated boxes or wooden crates, loaded on 20‑ft or 40‑ft containers, with Incoterms such as FOB Mumbai or CIF Dubai used for sea freight. Export documentation generally includes a commercial invoice, packing list, certificate of origin and, for metal products, a test report confirming coating thickness or alloy composition.

Sourcing from Sunbeam Exports - Buyer Guidance

When sourcing metal components from Sunbeam Exports, buyers should request a material test certificate that confirms the zinc coating weight (Z275 g/m²) for galvanized items and the exact alloy composition for brass and stainless‑steel parts. For wheelbarrows and stamped sheets, a tensile‑strength test report or a dimensional inspection report helps verify compliance with typical load‑bearing or thickness specifications. It is advisable to obtain a copy of the supplier’s ISO 9001 certification or any relevant CE/RoHS declarations before finalising a contract, and to confirm the HS‑code classification on the commercial invoice matches the product description. Samples should be inspected for surface finish, coating uniformity and dimensional tolerances before bulk production is approved.

What metal materials are offered in Sunbeam Exports’ product range?

The catalogue lists hot‑dip galvanized steel (Z275 g/m²), stainless steel grades 201 and 304, brass CZ121, mild steel variants, carbon steel, stainless steel and aluminum for sheet‑metal stamping.

Which HS codes apply to the listed products?

Ventilation components use HS 7308.90, bucket handles and sheet‑metal stamping use HS 7326.90, and brass or steel handle ends fall under HS 8302.49.

What typical certifications should a buyer request for these metal goods?

Buyers usually ask for ISO 9001 quality‑management certification, material test certificates for coating thickness or alloy composition, and, for EU shipments, CE or RoHS compliance where applicable.

What are common packaging and shipping methods for the metal items?

Products are typically packed in double‑wall corrugated boxes or wooden pallets, loaded on 20‑ft or 40‑ft containers, and shipped under Incoterms such as FOB Mumbai or CIF Dubai.

What specifications are important for the galvanized steel components?

Key specifications include a zinc coating weight of 275 g/m² (Z275), compliance with ASTM A123 or EN ISO 1461, and surface corrosion resistance suitable for outdoor use.

What load capacity can be expected from the wheelbarrow models?

Standard boxer wheelbarrows are generally rated for up to 100 kg, while heavy‑duty wheelbarrows can handle approximately 200 kg, depending on the frame construction.

How should a buyer verify the quality of brass handle ends?

Request a material test report confirming the CZ121 brass alloy composition and dimensional tolerances, and optionally a surface finish inspection for any plating or coating.

What lead time is typical for orders of sheet‑metal stamping?

Lead times vary by thickness and material but usually range from 2 weeks for standard carbon‑steel sheets to 4 weeks for custom‑alloy or stainless‑steel stamping.