About Shenyang Timeet Import&export Trading Co., Ltd. - Titanium Plate Supplier in China

Based in China, Shenyang Timeet Import&export Trading Co., Ltd. lists six active products across titanium and nickel alloy families. The catalogue includes Gr12 titanium sheet/plate (HS 8108.90), hot‑rolled titanium plates (HS 8108.20), cold‑rolled and pickled titanium sheet (HS 8108.20), ASTM B265 Gr5 BT6 titanium alloy sheet (HS 8108.90), Inconel X750 nickel alloy coil/belt/strip (HS 7506.20), and titanium alloy bar Gr5 (HS 8108.20). Each entry specifies the exact alloy composition, such as Ti‑0.3Mo‑0.8Ni for Gr12 or Ti‑6Al‑4V for Grade 5. The HS‑code families 8108 cover titanium plates, sheets and bars, while 7506 addresses nickel alloy coils and strips. The product list reflects both raw plate forms and processed bar shapes used in high‑performance applications.

The supplier’s top categories are Titanium Plate, Titanium Sheet, Titanium, Nickel Alloy and Titanium Bar, indicating a focus on aerospace‑grade and chemical‑resistant metals. The six catalogue items span both commercial‑purity (Grade 1/2 CP Ti) and alloyed grades (Gr5, Gr12, Inconel X750). Typical buyers reference ASTM standards for these grades, and the HS codes align with standard customs classifications for these metal forms. No additional product lines or services are noted beyond the listed items.

Product Range and Specialties of Shenyang Timeet Import&export Trading Co., Ltd.

Shenyang Timeet’s catalogue offers titanium sheets and plates in commercial‑purity grades (Grade 1 CP Ti, Grade 2 Ti‑0.3Fe‑0.25O) as well as alloyed grades such as Gr12 (Ti‑0.3Mo‑0.8Ni) and Gr5/Bt6 (Ti‑6Al‑4V). In the titanium market, buyers typically reference ASTM B265 for sheet specifications, including thickness tolerance of ±0.03 mm and tensile strength above 900 MPa for Grade 5. Nickel alloy offerings focus on Inconel X750 (UNS N07750), which conforms to ASTM B444 and is widely used for high‑temperature turbine and chemical processing components. Typical standards for Inconel include a minimum tensile strength of 860 MPa at 650 °C and corrosion resistance tests per ASTM G48. The titanium alloy bar (Gr5) follows ASTM B348, with standard bar diameters from 6 mm to 300 mm and surface finish Ra ≤ 1.6 µm.

Trade and Export Information - Shenyang Timeet Import&export Trading Co., Ltd.

Titanium plates, sheets and bars from China are commonly exported to aerospace hubs in North America, Europe and the Middle East, where certifications such as NADCAP and ISO 9001 are often required. HS code 8108.20 and 8108.90 are subject to standard customs documentation, including a commercial invoice, packing list and a mill test report that confirms chemical composition and mechanical properties. Nickel alloy coils under HS 7506.20 are frequently shipped to power‑generation and petrochemical sectors, with buyers expecting compliance with ASTM B444 and traceability to the UNS designation. Export logistics typically involve 20‑foot or 40‑foot containers, with pallets or wooden crates padded to prevent deformation, and Incoterms such as FOB Shanghai or CIF Rotterdam are standard.

Sourcing from Shenyang Timeet Import&export Trading Co., Ltd. - Buyer Guidance

When sourcing titanium or Inconel products from this supplier, request a recent Mill Test Certificate (MTC) that details the exact chemical analysis, tensile strength, elongation and heat‑treatment condition for each grade. Verify that the material complies with the relevant ASTM standard (e.g., B265 for sheets, B348 for bars, B444 for Inconel) and that the dimensions match the quoted tolerance. Buyers should also ask for a compliance statement covering any required ISO or NADCAP audits, especially for aerospace applications, and confirm packaging details such as crate dimensions and moisture barrier measures before confirming an order.

What HS codes apply to the titanium products listed by Shenyang Timeet?

Titanium sheet and plate items use HS 8108.20 for commercial‑purity grades and HS 8108.90 for alloyed grades such as Gr5 and Gr12. The titanium bar also falls under HS 8108.20.

Does the supplier provide material certification for the Inconel X750 coil?

The facts do not list any certifications held by the supplier. Buyers should request an up‑to‑date Mill Test Certificate that references ASTM B444 and the UNS N07750 composition.

What are the typical minimum order quantities for the titanium sheets?

While the catalogue does not specify MOQ, the industry often sets a minimum of one standard 20‑ft container (approximately 12 tons) for bulk sheet orders, subject to negotiation.

Which standards define the mechanical properties of the Gr5 titanium alloy sheet?

Gr5 (Ti‑6Al‑4V) sheets are covered by ASTM B265, which specifies a minimum tensile strength of 950 MPa and a yield strength around 880 MPa for annealed conditions.

What packaging methods are used for the titanium bars during export?

Titanium bars are typically packed in wooden crates with anti‑shock padding, secured on pallets, and covered with moisture‑resistant film to meet international shipping standards.

Which regions commonly import the nickel alloy coils offered by this supplier?

Inconel X750 coils from China are frequently exported to Europe, North America and the Middle East for use in aerospace engines, power‑generation turbines and chemical processing equipment.

What documentation should be requested before shipment?

Request a commercial invoice, packing list, bill of lading, and the Mill Test Certificate for each product batch. For aerospace buyers, also ask for any available ISO 9001 or NADCAP audit reports.

What are the typical lead times for the hot‑rolled titanium plates?

Lead times are not disclosed in the facts; however, industry practice for bulk hot‑rolled titanium plates ranges from 30 to 60 days after order confirmation, depending on production scheduling and shipping terms.