About Shanghai Empire Mechanical Engineering Co. Ltd. - Heat Exchangers Supplier in China

China, with a catalogue of 10 active products, Shanghai Empire Mechanical Engineering Co. Ltd. lists items across heat exchangers, hydraulic equipment, and gaskets. The company's catalogue includes hydraulic presses designed for thick steel plate forming, various gasket types intended for heat‑exchanger components, and spare parts for plate heat exchangers. Products are identified under HS‑code families commonly used for such equipment, such as 8419 for heat exchangers and 8483 for hydraulic presses. The listing reflects both complete assemblies like gasketed plate heat exchangers and individual components such as titanium plate parts. The focus is on industrial‑grade hardware suitable for process‑plant applications.

The catalogue enumerates a Hydraulic Press For Pressing Thick Steel Plates, a Hydraulic Press Machine For Plate Forming, and a Function As Cooler Heater Condenser Evaporator unit. Gasket offerings include Gaskets for Heat Exchanger Components, Viton Gasket Heat Exchanger Replacement, Plate Heat Exchanger Replacement Parts Gasket, Heat Exchanger Spare Parts Plate, Heat Exchangers Spare Parts Gaskets, and Gasketed Plate Heat Exchangers. Additional items are Heat Exchanger Spare Parts Gasket and Titanium Plate Parts For Heat Exchanger, covering both sealing and structural elements of plate‑type exchangers. Each entry aligns with standard industrial categories rather than consumer‑grade items.

Product Range and Specialties of Shanghai Empire Mechanical Engineering Co. Ltd.

The product list covers three core industrial families. Heat‑exchanger related items - such as gasketed plate heat exchangers, plate heat exchanger replacement parts, and titanium plate components - typically conform to ASME Section VIII pressure‑vessel standards and are fabricated from stainless‑steel grades 304/316 or titanium alloys for corrosion‑resistant service. Gasket selections like Viton or EPDM are rated for temperature ranges up to 200 °C and compression set limits below 15 %. Hydraulic presses for thick‑steel plate forming are usually rated between 500 kN and 2 MN, with frame constructions that meet ISO 12100 safety requirements. Buyers in the sector often request data on pressure rating, material certification (e.g., mill test reports), and dimensional tolerances expressed in millimetres.

Industry practice for these categories includes offering products in HS‑code 8419 (heat exchangers), 8483 (hydraulic presses), and 4016 (gaskets). Typical grades for plate heat exchangers are 1.0 mm to 3.0 mm plate thickness, with plate spacing from 5 mm to 15 mm, and overall heat‑transfer coefficients ranging from 300 to 800 W/m²·K. Gasket materials are classified by durometer (Shore A 70‑90 for Viton) and chemical compatibility charts. Hydraulic presses often specify stroke length (100 mm‑500 mm) and operating pressure (up to 250 bar).

Trade and Export Information - Shanghai Empire Mechanical Engineering Co. Ltd.

China is a major exporter of heat‑exchanger hardware, hydraulic presses, and industrial gaskets, with primary destinations in Europe, Southeast Asia, and the Middle East. HS‑code 8419 covers plate and shell‑and‑tube heat exchangers, while 8483 includes hydraulic presses and related machinery; gaskets fall under HS‑code 4016. Importers commonly require certifications such as ISO 9001 quality‑management, CE marking for equipment placed in the EU, and API 610 for pressure‑vessel related components. Export shipments are typically packed in wooden crates or steel pallets, loaded in 20‑ft or 40‑ft containers, and shipped under CIF or FOB terms. Chinese export regulations mandate a commercial invoice, packing list, and, where applicable, a test report from an accredited laboratory before customs clearance.

buyer:[

Sourcing from Shanghai Empire Mechanical Engineering Co. Ltd. - Buyer Guidance

When sourcing from this supplier, request mill test reports for all metal parts to verify alloy composition (e.g., 304/316 stainless steel or Ti‑6Al‑4V). For gaskets, ask for a full material data sheet that includes temperature range, compression set, and chemical resistance test results. Hydraulic presses should be accompanied by a pressure‑test certificate and a safety compliance declaration referencing ISO 12100 or relevant local standards. Verify that any heat‑exchanger components meet the required ASME or EN standards before confirming order quantities. Samples of gasket material or a small‑scale press unit are typical first‑step requests to assess fit and performance.

Confirm the packaging details - whether the items will be crated, palletised, or bulk‑shipped - and ensure the supplier can provide a container loading plan that matches your logistics preferences. Ask for a lead‑time estimate that includes manufacturing, quality inspection, and inland transport to the port of loading; Chinese manufacturers of these categories often quote 30‑45 days for standard items.

What product categories does Shanghai Empire Mechanical Engineering Co. Ltd. list?

The catalogue includes hydraulic presses for thick‑steel plate forming, a range of gaskets designed for heat‑exchanger components (including Viton variants), and spare‑part items such as titanium plate parts and gasketed plate heat exchangers.

Which HS‑code families are relevant to the listed products?

Heat‑exchanger assemblies and spare parts fall under HS‑code 8419, hydraulic presses are classified under HS‑code 8483, and gaskets are covered by HS‑code 4016.

What material standards should a buyer verify for the heat‑exchanger components?

Buyers should check for compliance with ASME Section VIII pressure‑vessel standards and request mill test reports confirming stainless‑steel grades (e.g., 304, 316) or titanium alloy specifications.

What typical certifications are expected for hydraulic presses from Chinese exporters?

Importers usually request ISO 9001 quality‑management certification, CE marking for EU markets, and a safety compliance statement referencing ISO 12100 or comparable national standards.

What performance data are common for Viton gaskets used in heat‑exchanger applications?

Viton gaskets are typically rated for continuous temperatures up to 200 °C, have a Shore A hardness of 70‑90, and exhibit compression‑set values below 15 % after 24 hours at service temperature.

What are typical minimum order quantities (MOQ) and lead times for the listed items?

MOQs vary by product; gasket sets often start at 500 units, while hydraulic presses may require a single unit order. Lead times generally range from 30 days for standard gaskets to 45 days for custom‑fabricated hydraulic presses or titanium plate parts.

How are the products usually packaged for international shipment?

Items are commonly packed in wooden crates or steel‑reinforced pallets, with heat‑exchanger plates wrapped in anti‑corrosion film, and loaded in 20‑ft or 40‑ft containers under FOB or CIF terms.

What documentation should a buyer request before payment?

Buyers should obtain a commercial invoice, packing list, certificate of origin, mill test reports for metal parts, and any applicable third‑party test certificates (e.g., pressure‑test report for presses).