About Shaanxi Automobile & Machinery Co., Ltd. - Trucks Supplier in China

China-based Shaanxi Automobile & Machinery Co., Ltd. lists five distinct commercial vehicle models in its catalogue. The portfolio covers heavy‑duty dump trucks, a tractor truck and a mixer truck, all falling under the road‑vehicle HS chapter 87. The models range from 20‑tonne 6×4 dump trucks to a 40‑tonne 6×4 tractor truck. Each entry specifies gross vehicle weight and axle configuration, which are key parameters for buyers. The supplier is classified as an imported, harbor‑tier supplier.

The dump‑truck lineup includes a 20‑tonne 6×4 unit, a 30‑tonne 8×4 unit and a Sinotruk Howo 20‑tonne 6×4 variant, while the mixer truck offers an 8‑cubic‑metre concrete mixing capacity. The tractor truck is rated at 40 tonnes with a 6×4 drivetrain. These vehicles are built on chassis that comply with ISO 3833 specifications for road vehicles. Engine output, braking system type and cabin ergonomics are typical selection criteria in this segment. The catalogue does not provide additional technical data such as engine model or emission class.

Product Range and Specialties of Shaanxi Automobile & Machinery Co., Ltd.

The catalogue’s five models cover the core categories of heavy‑duty dump trucks, a tractor truck and a concrete mixer truck. In the global market, dump trucks of 20‑30 tonne GVW are commonly equipped with diesel engines delivering 300‑500 kW, equipped with hydraulic dump mechanisms and meet Euro VI or China‑VI emission standards. Mixer trucks of 8 m³ capacity typically feature rotating drum mixers with a water‑to‑cement ratio control and a hydraulic tilt system. Tractor trucks in the 40‑tonne class often serve as prime movers for semi‑trailers and are fitted with reinforced frames and multi‑speed transmissions.

Industry standards for these vehicle types include ISO 3833 for classification, ISO 9001 quality management, and type‑approval certificates issued by the Chinese Ministry of Industry and Information Technology. Buyers also look for compliance with safety regulations such as UNECE R29 (brake performance) and R66 (load‑carrying capacity). Typical payload ratings for 20‑tonne dump trucks are 12‑14 tonnes, while 30‑tonne units can carry up to 22 tonnes. Concrete mixer trucks usually specify a drum rotation speed of 5‑7 rpm and a maximum aggregate size of 25 mm.

Trade and Export Information - Shaanxi Automobile & Machinery Co., Ltd.

China is among the largest exporters of commercial road vehicles, with the HS code 8704 covering trucks, tippers and buses. Major import destinations for Chinese heavy‑duty trucks include countries in Africa, the Middle East, Southeast Asia and Latin America, where lower acquisition cost and robust construction are valued. Buyers in these regions typically require documentation such as the Certificate of Origin, the vehicle type‑approval certificate, and compliance with local emission standards, often Euro VI or equivalent.

Standard shipping for complete trucks uses roll‑on/roll‑off (RoRo) vessels or containerized transport for components, with Incoterms like FOB Shanghai or CIF Lagos commonly applied. Exporters from China often hold ISO 9001 and may obtain additional certifications such as CE marking for safety components. Inspection agencies such as SGS or Bureau Veritas frequently conduct pre‑shipment checks covering dimensions, weight, VIN verification and compliance with the declared HS code. The supplier’s target markets are not listed, so buyers should confirm the intended destination’s regulatory requirements before ordering.

Sourcing from Shaanxi Automobile & Machinery Co., Ltd. - Buyer Guidance

When sourcing vehicles from Shaanxi Automobile & Machinery, buyers should request the full technical data sheet, including engine model, power output, emission standard, braking system type and payload rating. Verification of the vehicle’s type‑approval certificate and ISO 9001 quality management certification helps confirm compliance with international standards. Requesting a pre‑shipment inspection report and photographs of the VIN label is standard practice for heavy‑duty trucks.

Typical minimum order quantities are one unit per model, but lead times can range from 8 to 12 weeks depending on production scheduling and destination port handling. Buyers should specify the preferred Incoterm, arrange for RoRo loading, and ensure that customs documentation such as the Bill of Lading, Certificate of Origin and any required emission compliance certificates are prepared in advance.

What types of trucks does Shaanxi Automobile & Machinery list in its catalogue?

The catalogue includes a 20‑tonne 6×4 dump truck, a 30‑tonne 8×4 dump truck, a 40‑tonne 6×4 tractor truck, an 8‑cubic‑metre concrete mixer truck, and a Sinotruk Howo 20‑tonne 6×4 dump truck. All models fall under HS code 8704 for road vehicles.

Which HS code applies to the vehicles offered by this supplier?

The vehicles are classified under HS Chapter 87, specifically heading 8704 which covers trucks, tippers and buses. This code is used for customs declaration and tariff calculation.

What certifications should a buyer verify for these trucks?

Buyers should request the supplier’s ISO 9001 quality‑management certificate and the vehicle type‑approval certificate issued by Chinese authorities. Additional safety certifications such as CE marking for component parts may also be relevant.

What are the typical payload capacities for the dump trucks listed?

The 20‑tonne dump truck is usually rated for a payload of 12‑14 tonnes, while the 30‑tonne model can carry up to 22 tonnes. Exact payload figures are provided in the technical specifications sheet.

How are these trucks usually shipped to international buyers?

Heavy‑duty trucks are commonly shipped on roll‑on/roll‑off vessels or as partially disassembled units in 40‑foot containers. Shipping terms such as FOB Shanghai or CIF the destination port are standard.

What documentation is needed for customs clearance of these vehicles?

Required documents typically include the Bill of Lading, Certificate of Origin, vehicle type‑approval certificate, and any emission‑standard compliance certificates. An inspection report from a recognized agency can facilitate clearance.

What is the typical lead time from order to shipment?

Lead times generally range from eight to twelve weeks, depending on production scheduling and the buyer’s chosen Incoterm. Buyers should confirm the exact timeline during the quotation process.