About Rahul Sharma - Ladies Tops Supplier in India

India (city/region not specified) is the base for Rahul Sharma, an imported‑tier supplier that currently lists five active products. The catalogue includes ladies tops, a water manifold, a mould clamp (HS 8477.90, made from hardened tool or alloy steel), a hopper magnet (HS 8505.19, composed of Neodymium NdFeB Grade N42 or Ceramic Ferrite Y30BH) and bulk rice. Each entry falls under one of the top categories reported: Ladies Tops, Industrial Valves & Gauges, Clamps, Magnets & Magnetic Products, and Rice. The supplier’s HS‑code families span the 61‑series for apparel, 84‑series for valves and clamps, 85‑series for magnetic products, and the 10‑series for agricultural commodities.

The product set reflects a mix of textile and industrial goods, with the ladies tops classified under the women’s apparel HS chapter 61, while the water manifold and mould clamp belong to the machinery and tools chapter 84. The hopper magnet is recorded under chapter 85 for electrical machinery, and rice is a staple agricultural product typically recorded under chapter 10. No additional certifications are listed, so buyers should verify compliance with industry standards relevant to each category before procurement.

Product Range and Specialties of Rahul Sharma

Rahul Sharma’s catalogue offers five distinct items: ladies tops, a water manifold, a mould clamp, a hopper magnet and rice. In the apparel segment, ladies tops are commonly supplied in cotton‑polyester blends, sized according to Indian standard IS 1441, and often meet ISO 105 colour‑fastness criteria. The water manifold and mould clamp are fabricated from hardened tool steel, frequently meeting hardness levels of 60‑65 HRC and conforming to ISO 9001 quality management practices. Hopper magnets are typically graded N42 for neodymium‑iron‑boron or Y30BH for ferrite, delivering a magnetic flux density around 0.4‑0.5 Tesla. Indian rice exports are usually milled to a moisture content of 12‑14 % and may be classified as Basmati or non‑Basmati varieties under the standard HS 1006.30.

Trade and Export Information - Rahul Sharma

India is a major exporter of both textile apparel and industrial components, with the European Union, United States and Middle East being primary destinations for women’s garments, while machinery and valve parts are frequently shipped to Southeast Asia and Africa. Magnetic products such as neodymium magnets are in demand for electronics assemblies in China, Germany and the United States, and the relevant HS‑code 8505.19 often requires CE marking or RoHS compliance for downstream use. Rice from India is a staple commodity exported to the Gulf Cooperation Council, Africa and Southeast Asia, typically subject to phytosanitary certificates and compliance with the Codex Alimentarius standards for moisture and pesticide residues. Common logistics involve 20‑ft or 40‑ft containers for apparel and rice, while clamps and magnets are often packed in wooden crates or bulk bags with HS‑code‑specific labeling. Buyers should anticipate standard Incoterms such as FOB Mumbai or CIF Dubai, and be prepared to provide import permits or test reports as required by the destination country.

Sourcing from Rahul Sharma - Buyer Guidance

When sourcing from Rahul Sharma, buyers should request material test reports for the hardened steel clamp (e.g., hardness and tensile strength) and magnetic property certificates for the hopper magnet (e.g., B‑H curve, coercivity). For ladies tops, a fabric composition certificate and size chart are standard verification documents, while rice shipments should be accompanied by a moisture analysis report and a phytosanitary certificate. Because no certifications are listed in the supplier profile, buyers are advised to confirm ISO 9001 or equivalent quality‑management certification before placing large orders, and to obtain sample units to verify fit, finish and performance against the typical industry specifications described above.

What product categories does Rahul Sharma list in its catalogue?

The catalogue includes ladies tops, a water manifold, a mould clamp (HS 8477.90, hardened tool/ alloy steel), a hopper magnet (HS 8505.19, Neodymium NdFeB N42 or Ceramic Ferrite Y30BH) and bulk rice.

Which HS codes are associated with the listed products?

The mould clamp is recorded under HS 8477.90 and the hopper magnet under HS 8505.19. Ladies tops fall under the apparel chapter 61, water manifolds under chapter 84, and rice under chapter 10, though specific HS numbers for those items are not provided in the catalogue.

What material specifications should I verify for the mould clamp?

Verify that the clamp is made from hardened tool steel or alloy steel, typically achieving a hardness of 60‑65 HRC and meeting tensile strength values of 800‑1000 MPa as defined in ISO 4957 for hardened steel tooling.

What magnetic grade is offered for the hopper magnet?

The hopper magnet is supplied in Neodymium NdFeB Grade N42 or Ceramic Ferrite Y30BH, which generally provide a magnetic flux density of about 0.4‑0.5 Tesla and coercivity suitable for industrial handling applications.

What quality documents are advisable for the rice product?

Request a moisture content analysis (12‑14 % typical), a phytosanitary certificate, and a compliance report with Codex Alimentarius standards for pesticide residues.

Are there standard certifications buyers should ask for?

Since no certifications are listed, buyers should ask the supplier to provide ISO 9001 quality‑management certification, CE or RoHS compliance for magnetic products, and any relevant textile certifications such as ISO 105 for colour fastness.

What are typical packaging and shipping methods for these items?

Ladies tops and rice are usually packed in cartons or bulk bags suitable for 20‑ft or 40‑ft containers. The clamp and magnet are commonly crated in wood or metal pallets with protective padding to prevent damage during sea freight.

What lead times and minimum order quantities are common for these categories?

Lead times in India range from 15‑30 days for apparel, 20‑45 days for industrial clamps and magnets, and 10‑20 days for rice, with minimum order quantities typically set at one container load for rice and 500‑1,000 units for apparel, while clamps and magnets often have MOQs of 100‑200 pieces depending on size. Buyers should confirm exact figures with the supplier before order placement.