About Quanzhou Jaz Mould Co., Ltd. - Plastic Items Supplier in China

China, with an active product count of 11, Quanzhou Jaz Mould Co., Ltd. lists items across several categories including plastic items, bathroom accessories, plastic bottles & sealings, processed vegetable products, agriculture, panels, and spectacles accessories. The catalogue comprises moulds for automotive parts, medical device components, and cosmetic packaging, as well as finished plastic accessories such as bathroom fittings and eyewear cases. The product list reflects a focus on injection mould technology and downstream plastic components. The supplier is classified in the harbor trust tier, indicating a medium‑level reliability rating in trade platforms.

Among the 11 entries, the company offers a bathroom accessories injection mould identified under HS code 8480.41, built from tool steel grades P20 or H13 for mould bases and cores. An automotive rear bumper mould is classified under HS code 8708.29 and uses ABS automotive grade resin. Other items include a medical device plastic injection mould, a high‑precision auto parts mould, and various cosmetic containers such as ABS lipstick tubes and PMMA/PP/PS cosmetic bottles. The catalogue also lists an EVA hard case for eyeglasses and a motorbike front wheel cover panel, illustrating the breadth of polymer applications covered.

Product Range and Specialties of Quanzhou Jaz Mould Co., Ltd.

Quanzhou Jaz Mould’s catalogue contains injection moulds for auto parts, medical devices and bathroom fittings, primarily fabricated from tool steels P20 and H13. In the plastics industry, P20 is a pre‑hardened steel commonly used for medium‑volume production, offering a hardness of 28‑32 HRC, while H13 provides higher thermal‑fatigue resistance for high‑temperature moulding. The ABS resin specified for the automotive rear bumper mould meets typical automotive grade specifications of melt flow index 15‑30 g/10 min and impact strength above 20 kJ/m². Cosmetic containers listed use PMMA, PP, PS and ABS, materials that commonly comply with ISO 9001 quality management and, for personal‑care products, REACH and FDA‑compatible purity levels.

The bathroom accessories mould falls under HS chapter 84, where buyers usually require compliance with the EU Toy Safety Directive for plastic components and IEC 60529 ingress protection ratings for bathroom fittings. EVA hard cases for eyewear are typically graded for impact resistance (≥ 30 J) and UV stability, and are shipped in recyclable cardboard or molded pulp. Motorbike front wheel covers and splash guards are often produced in ABS or polycarbonate with a cloud point below - 20 °C to maintain dimensional stability across temperature swings.

Trade and Export Information - Quanzhou Jaz Mould Co., Ltd.

China is a major exporter of injection‑moulded plastic components, with the automotive and consumer‑goods sectors accounting for a large share of shipments under HS codes 8708 and 8480. Buyers in Europe, North America and Southeast Asia frequently import these items, demanding certifications such as ISO 9001, ISO 14001 and, for medical devices, ISO 13485. HS code 8708.29 covers other parts and accessories of motor vehicles, which typically require a CE mark for the EU market and compliance with UN Regulations for vehicle safety. For bathroom accessories (HS 8480.41), customs authorities often request a material safety data sheet and proof of compliance with the EU Construction Products Regulation.

Standard export packaging for moulds includes reinforced wooden crates with foam inserts to protect the steel cores, while finished plastic parts are commonly packed in 20‑ft or 40‑ft containers using cardboard boxes and void‑fill to prevent movement. Buyers usually specify FOB or CIF terms, with the choice influencing who arranges marine freight and insurance. Chinese exporters typically provide a commercial invoice, packing list, certificate of origin and, where applicable, a test report conforming to ASTM D256 for impact testing of ABS components. Seasonal demand peaks for automotive accessories align with vehicle production cycles in Q1 and Q3, influencing lead times and container loading schedules.

Sourcing from Quanzhou Jaz Mould Co., Ltd. - Buyer Guidance

Importers should request material certificates confirming the grade of tool steel (P20 or H13) and heat‑treatment records for each mould, as well as melt flow index and impact strength data for ABS automotive grade resins. For cosmetic containers, a declaration of compliance with REACH and a migration test report are standard documentation. Sample moulds or pilot‑run parts can verify dimensional tolerances, typically within ± 0.05 mm for injection‑moulded components.

Typical minimum order quantities for custom moulds range from one to three units, with a standard lead time of 8‑12 weeks after final design approval. Finished plastic parts such as bathroom accessories or eyewear cases often have MOQs of 5 000 pieces per colour and are shipped in bulk cartons sized to fit standard 20‑ft containers. Buyers should confirm that the supplier can provide ISO‑based quality‑management audit reports and that any required third‑party inspections (e.g., SGS, Bureau Veritas) are arranged before shipment.

What product categories does Quanzhou Jaz Mould supply?

The supplier lists injection moulds for automotive parts, medical devices and bathroom accessories, as well as finished plastic items such as cosmetic bottles, ABS lipstick tubes, EVA eyeglass cases and motorbike wheel covers.

Which HS codes are associated with the supplier’s products?

The bathroom accessories mould is filed under HS 8480.41, and the automotive rear bumper mould falls under HS 8708.29; other items are classified within the broader HS chapters for plastic articles (84‑90) and automotive components.

What material specifications should buyers verify for the ABS automotive grade product?

Buyers should obtain the ABS grade sheet showing a melt flow index of 15‑30 g/10 min, impact strength above 20 kJ/m², and compliance with RoHS for restricted substances.

Are there standard certifications that buyers typically require from this supplier?

While the supplier’s catalogue does not list certifications, buyers generally request ISO 9001 for quality management, ISO 13485 for medical‑device moulds, and a CE declaration for automotive parts destined for the EU.

What is the typical lead time for a custom injection mould?

After design approval, most custom moulds are produced in 8‑12 weeks, depending on complexity and the chosen steel grade.

What packaging is used for shipping the moulds and finished plastic parts?

Moulds are usually packed in reinforced wooden crates with foam inserts, whereas finished plastic components are placed in cardboard boxes with void‑fill and loaded into 20‑ft or 40‑ft containers.

How can a buyer request a sample or prototype before placing a full order?

Buyers can ask the supplier to produce a pilot‑run sample of the intended part; the sample is typically shipped under FOB terms and includes a test report for material properties.