About Pme Asia Group - Mineral and Glass Products Supplier in India

Pme Asia Group is located in India and lists 33 active products across its catalogue. The supplier’s top categories include Mica Products, Other Ores & Minerals, Glass & Glass Products, Laminates, Industrial Chemicals, Silica Sand, Talc and Mineral Powder. Among the listed items are Pigment, Cenosphere (HS 2508.90, a silica‑alumina hollow microsphere derived from fly ash), and a range of mica derivatives such as Mica Scrap / Mica Chips (HS 2525.10, natural muscovite or phlogopite). Additional mica forms include Mica Flakes (HS 2525.20), Mica Splittings (HS 2524.10), Mica Thins, Discs, Washers, Paper, and various Micanite sheets and tubes, all classified under HS 6814.10. The catalogue also contains Fumed Silica (HS 2811.22, amorphous SiO2), Talc (HS 2526.20, natural hydrated magnesium silicate), Wollastonite Powder (HS 2512.00, natural calcium silicate), and chemicals such as Sodium Hexametaphosphate and Potassium Silicate.

The glass segment lists Transparent Gauge Glass and Reflex Gauge Glass, while the non‑asbestos jointing sheets appear without a specific HS code. Mica‑based engineered products such as Micanite Boards, Rigid and Flexible Micanite Sheets, Micanite Tubes, and Micanite Washers are all recorded under HS 6814.10 and are described as reconstituted mica bonded with silicone or epoxy resins. Mica Powder and Mica Blocks (HS 2525.20) are offered in natural muscovite or phlogopite forms, and specialty items like Natural Heating Mica Elements and Mica Shields & Gaskets target electrical and thermal applications. The mineral powder line includes Wollastonite and Fumed Silica, both commonly used as fillers and reinforcement agents in composites and coatings. Protein Bait (HS 3808.91) is listed as a protein hydrolysate, indicating the supplier also handles select industrial chemicals beyond mineral products.

Product Range and Specialties of Pme Asia Group

The catalogue covers a broad spectrum of mica derivatives, including raw chips, flakes, splittings, thins, discs, washers, paper, and engineered Micanite products such as boards, rigid/flexible sheets, tubes and gaskets. Typical industry grades for mica flakes range from industrial grade (particle size 50‑150 µm) to fine grade (≤ 75 µm) used in cosmetics, while mica discs and thins are supplied in electrical grade with low iron content (< 0.02 %). Fumed silica is usually specified by specific surface area (150‑300 m²/g) and bulk density (0.05‑0.15 g/cm³). Talc grades are differentiated by KSF (Köhler‑Schmidt‑Fischer) values, with cosmetic grade above 90 KFS and industrial grade around 70 KFS. Wollastonite powder is commonly graded by particle size (3‑20 µm) and calcium‑silicate purity (> 95 %).

In the global market, Indian mica exporters are known for supplying both natural and reconstituted forms that meet the IEC‑607 standard for electrical insulation. Buyers of silica sand typically require a minimum SiO₂ purity of 99 % and moisture below 0.1 %, often verified by XRF analysis. For talc, REACH registration and conformity to ISO 9001 quality management are standard expectations in European markets. Fumed silica and wollastonite are frequently shipped in 20‑ft containers with moisture‑proof liners, and batch certifications such as ASTM D4935 (specific surface area) are commonly requested.

Trade and Export Information - Pme Asia Group

India ranks among the top global exporters of mica, talc, silica sand and specialty mineral powders, supplying automotive, electronics, paint, and construction industries across Europe, North America and Southeast Asia. HS chapter 68 (6814.10) for mica products, chapter 25 (2508, 2525, 2524, 2526) for mineral powders, and chapter 28 (2811.22) for fumed silica are routinely examined by customs for correct tariff classification and anti‑dumping duties. Importers often require certificates of origin, ISO 9001 quality system certificates, and compliance documents such as REACH registration for EU shipments or TSCA inventory for the United States.

Typical logistics involve bulk bagging (1 ton per bag) for powders and 20‑ft or 40‑ft containers for sheet‑type products. Buyers frequently request phytosanitary or non‑hazardous material declarations when the product is used in food‑grade applications. Indian exporters usually offer FOB or CIF terms, with loading ports such as Mumbai, Chennai or Visakhapatnam, and they adhere to the International Maritime Dangerous Goods (IMDG) code when chemicals like Sodium Hexametaphosphate are involved.

Sourcing from Pme Asia Group - Buyer Guidance

When sourcing from Pme Asia Group, buyers should request a Material Safety Data Sheet (MSDS) for each chemical or mineral, a latest test report showing purity, moisture content and particle size distribution, and verification that the HS code on the invoice matches the product description. For mica products, confirm the grade (industrial, fine or electrical) and ask for iron‑content analysis if the end‑use is electronic insulation. Samples are typically provided in 25 kg bags for powders and 1 m² sheet pieces for Micanite products; MOQ for production runs often starts at 1 ton for bulk orders but can be negotiated for smaller pilot quantities.

Buyers should also verify that the supplier can provide export documentation required by the destination country, such as a Certificate of Analysis (CoA), ISO 9001 certification, and, where applicable, REACH registration numbers or ASTM test certificates. Requesting a pre‑shipment inspection report (e.g., SGS or Bureau Veritas) helps confirm that dimensions, thickness and surface finish of sheets or discs meet the specified tolerances before loading.

Which HS codes are used for the mica products listed by Pme Asia Group?

Mica Scrap / Chips are classified under HS 2525.10, Mica Flakes under HS 2525.20, Mica Splittings under HS 2524.10, and all reconstituted or engineered mica items such as Mica Paper, Micanite Boards and Micanite Sheets fall under HS 6814.10.

What certifications does Pme Asia Group hold for its mineral products?

The supplied facts do not list any specific certifications held by the supplier. Buyers should ask the supplier to provide ISO 9001, REACH registration or any other relevant third‑party certificates that are standard for the target market.

What typical grades should a buyer request for mica flakes?

Buyers usually specify industrial grade (particle size 50‑150 µm, iron < 0.05 %) or fine grade (≤ 75 µm, iron < 0.02 %) depending on whether the application is for paints, cosmetics or electrical insulation.

How is Fumed Silica normally packaged for export?

Fumed silica is commonly packed in moisture‑proof multi‑layer bags of 20 kg or 25 kg, placed inside 20‑ft containers with desiccant pouches to maintain its high specific surface area.

What documentation is needed for importing Talc from India into the EU?

Importers typically require a Certificate of Origin, an REACH registration number, a recent test report showing KSF value (≥ 90 for cosmetic grade) and a Material Safety Data Sheet.

What are the typical lead times for bulk orders of Micanite Sheets?

Lead times for engineered Micanite sheets usually range from 4 to 6 weeks after order confirmation, depending on the required thickness, binder type and order volume.

Can Pme Asia Group provide samples of Mica Powder?

Samples of Mica Powder are generally supplied in 5 kg to 25 kg quantities; buyers should request a sample quote and confirm the grade (industrial or fine) before placing a larger order.