About Pacific Century Electronic Co., Ltd. - Electric Components Supplier in China

China hosts Pacific Century Electronic Co., Ltd., which currently lists 15 active products in its catalogue. The supplier focuses on electric components and computer hardware, offering a series of Siemens and Allen‑Bradley modules that fall under the HS code 8537.10 for electronic components with metal or steel housings. The catalogue includes factory‑new Siemens modules such as 6ES7 468‑1BF00‑0AA0, 6ES7 468‑1CF00‑0AA0, and 6ES7 463‑2AA00‑0AA0, as well as Allen‑Bradley 1756‑L61 and 1756‑L61S items. Each product description references the specific Siemens part number and, where provided, the material construction (metal or steel housing). The supplier’s inventory is presented without additional branding or client references.

The product set spans a range of programmable logic controller (PLC) I/O modules, signal processing units, and communication interface cards commonly used in automation and control systems. Siemens modules listed are part of the SIMATIC S7‑300 series, while the Allen‑Bradley items belong to the CompactLogix family, both of which are standard in industrial equipment worldwide. The HS code 8537.10 indicates that these items are classified as “Electrical apparatus for switching or protecting electrical circuits.” No other HS codes are supplied for the remaining entries, which are described only by their model identifiers. The catalogue does not specify any certifications held by the supplier, leaving verification of compliance to the buyer’s due diligence.

Product Range and Specialties of Pacific Century Electronic Co., Ltd.

Pacific Century Electronic’s catalogue concentrates on Siemens SIMATIC S7‑300 I/O modules and Allen‑Bradley CompactLogix I/O cards, all falling under the electronic components HS code 8537.10. Typical industry grades for such modules include IEC 61131‑3 programmable controller compliance, RoHS‑restricted substances limits, and CE marking for European market entry. Materials commonly observed are aluminium or steel housings with printed circuit boards, matching the material notes given for the Siemens 6ES7 468‑1CF00‑0AA0 (metal housing) and 6ES7 463‑2AA00‑0AA0 (steel housing). Buyers often receive these units packed in anti‑static bubble wrap inside double‑wall cartons, suitable for protection during sea freight.

In the broader market, PLC I/O modules are offered in variants such as digital input, digital output, analog input, and analog output cards, each with specific voltage and current ratings (e.g., 24 V DC, 10 A). The Siemens and Allen‑Bradley families also support modular backplane configurations, allowing users to assemble customized racks. Typical specifications include operating temperature ranges from - 25 °C to +70 °C, IP20 enclosure protection, and IEC‑60617 marking for electrical safety. These industry standards provide a reference frame for evaluating the items listed by Pacific Century Electronic.

Trade and Export Information - Pacific Century Electronic Co., Ltd.

China is a major exporter of electronic components, and HS code 8537.10 is routinely used for PLC modules, power supplies, and circuit breakers. Export shipments from China to Europe, North America, and Southeast Asia commonly employ 20‑foot or 40‑foot containers, with unit counts ranging from 200 to 1,000 modules per container depending on packaging density. Buyers typically request CE declarations, RoHS test reports, and IEC‑type test certificates to satisfy regulatory requirements in the EU and NAFTA regions. While Pacific Century Electronic does not list specific certifications, exporters of similar modules from China often hold ISO 9001 quality management systems and obtain third‑party test reports to facilitate customs clearance.

Logistics for these electronic components usually involve palletized loads on wooden pallets, with each pallet wrapped in stretch film to prevent static discharge. Freight forwarders often advise using CIF (Cost, Insurance, Freight) terms for high‑value electronic goods, and customs authorities may inspect the HS code 8537.10 items for compliance with electronic waste (WEEE) directives. The Chinese export environment provides established channels for bulk shipments, and buyers should verify that the supplier can provide appropriate export licenses and documentation for the target market.

Sourcing from Pacific Century Electronic Co., Ltd. - Buyer Guidance

When sourcing Siemens or Allen‑Bradley modules from Pacific Century Electronic, buyers should request the latest datasheet, part number verification, and a RoHS compliance certificate before placing an order. It is advisable to ask for a functional test report that confirms each module meets IEC 61131‑3 performance criteria, as well as a CE declaration of conformity if the goods are intended for the European market.

Buyers should also confirm packaging details, such as anti‑static bagging and carton dimensions, to ensure safe handling during transit. Minimum order quantities (MOQs) for individual module types are not disclosed in the catalogue, so direct inquiry is required. Lead times for factory‑new items typically range from 10 to 25 working days, depending on stock availability and shipping method.

What Siemens module series are listed by Pacific Century Electronic?

The supplier lists several Siemens SIMATIC S7‑300 modules, including part numbers 6ES7 468‑1BF00‑0AA0, 6ES7 468‑1CF00‑0AA0, 6ES7 463‑2AA00‑0AA0, and related variants such as 6ES7 460‑3AA01‑0AB0 and 6ES7 461‑3AA01‑0AA0.

Which Allen‑Bradley products are available?

Pacific Century Electronic offers the Allen‑Bradley CompactLogix I/O cards model 1756‑L61 and 1756‑L61S, both described as in‑stock items.

What HS code applies to the Siemens modules in the catalogue?

The Siemens modules that include HS information are classified under HS code 8537.10, which covers electronic components with metal or steel housings.

What material specifications are noted for the Siemens modules?

Two Siemens modules have material details: 6ES7 468‑1CF00‑0AA0 is described as having a metal housing with circuitry, and 6ES7 463‑2AA00‑0AA0 is noted as having a steel housing.

What certifications should a buyer request for these modules?

Buyers should request RoHS compliance certificates, CE declarations of conformity, and functional test reports that reference IEC 61131‑3 standards.

How are the modules typically packaged for export?

Industry practice for PLC modules includes anti‑static bubble wrap within double‑wall cartons, often stacked on wooden pallets and wrapped with stretch film for sea freight.

What are common lead times for factory‑new electronic components from China?

Factory‑new modules generally have lead times of 10 to 25 working days, subject to stock levels and shipping arrangements.

Which markets commonly import these types of electronic components?

Europe, North America, and Southeast Asian countries are frequent importers of PLC I/O modules classified under HS code 8537.10.