About OK Packaging Manufacturing Co., Ltd. - Packaging Items & Containers Supplier in China

OK Packaging Manufacturing Co., Ltd. operates from China and currently lists five distinct packaging products. The catalogue includes plastic packaging bags, aluminum oil bags, aluminum foil spout pouches, antitic bags and shampoo packaging bags, all classified under the broader category of Packaging Items & Containers. Each item is presented without additional brand or client references, reflecting the supplier’s focus on core packaging formats. The product count of five indicates a targeted, niche offering rather than a broad‑line portfolio.

The supplier’s product set spans both polymer and metal substrates, covering flexible solutions for liquids, powders and personal‑care items. Plastic packaging bags are typically manufactured from LDPE or HDPE films, while aluminum oil bags and foil spout pouches use food‑grade aluminum foil laminates. Antitic bags suggest anti‑static treatment for electronic components, and shampoo bags are designed for viscous liquids with sealable features. The catalogue does not specify dimensions, but such items are commonly supplied in standard roll or bulk bag formats for downstream conversion.

Product Range and Specialties of OK Packaging Manufacturing Co., Ltd.

The listed products reflect common packaging formats used in consumer and industrial supply chains. Plastic packaging bags are usually produced in thicknesses ranging from 30 µm to 120 µm, with tensile strength measured in MPa and a typical melt flow index (MFI) of 4 - 8 g/10 min for LDPE grades. Aluminum oil bags and foil spout pouches employ aluminum foil of 6 - 12 µm thickness laminated to a polymer carrier, providing barrier performance measured by water vapor transmission rate (WVTR) below 0.1 g/m²·24 h. Antitic bags are treated to achieve surface resistivity below 10⁶ Ω/sq, meeting IEC 61340‑5‑1 requirements for static‑dissipative packaging. Shampoo packaging bags are often designed with a sealable gusset and a thickness of 80 - 120 µm to handle high‑viscosity formulations without leakage. Buyers typically request material safety data sheets (MSDS) and specifications such as burst pressure, seal strength and dimensional tolerances.

Trade and Export Information - OK Packaging Manufacturing Co., Ltd.

China is a major exporter of flexible packaging, supplying North America, the European Union and Southeast Asian markets. Export shipments of polymer and metal flexible packaging are usually packed in 20‑ft or 40‑ft containers, with a typical load of 1,000 - 1,200 kg per container for bulk rolls. International buyers often require compliance with ISO 9001 quality management, and for food‑contact applications, certifications such as FDA 21 CFR 175.105 for aluminum foil and EU Regulation 1935/2004 for plastic films are standard. Inspection agencies frequently perform pre‑shipment checks for thickness, barrier performance and anti‑static treatment, and buyers may request third‑party lab reports in accordance with ASTM D882 (tensile) or ISO 11339 (WVTR).

Sourcing from OK Packaging Manufacturing Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request a detailed product data sheet that lists film thickness, material composition (e.g., LDPE, HDPE, aluminum foil grade) and performance test results such as tensile strength, seal strength and barrier ratings. For antitic bags, ask for a static‑dissipative certification and a surface resistivity measurement. Samples should be evaluated for compatibility with the intended product, especially for oil‑containing or shampoo formulations where seal integrity is critical. Verify that the supplier can provide relevant regulatory declarations, such as FDA or EU food‑contact compliance, before confirming bulk orders.

What material is used for the plastic packaging bags?

The plastic bags are typically produced from low‑density polyethylene (LDPE) or high‑density polyethylene (HDPE) film, with thicknesses between 30 µm and 120 µm.

Are the aluminum oil bags suitable for food‑grade applications?

Aluminum oil bags are generally made from food‑grade aluminum foil laminated to a polymer layer and can meet FDA 21 CFR 175.105 when the supplier provides the appropriate compliance documentation.

What does ‘antitic bag’ refer to?

An antitic bag is an anti‑static flexible package treated to achieve surface resistivity below 10⁶ Ω/sq, complying with IEC 61340‑5‑1 for protection of electronic components.

What seal performance should be expected for the shampoo packaging bag?

Shampoo bags are usually designed with a burst pressure of at least 0.8 MPa and a seal strength of 1.5 N/mm, suitable for high‑viscosity liquid containment.

Which certifications are commonly required for these packaging products?

Buyers typically request ISO 9001 for quality management, and for food‑contact items, FDA or EU food‑contact certifications, as well as any specific anti‑static test reports for antitic bags.

What packaging and shipping format is used for bulk orders?

Bulk shipments are commonly loaded in 20‑ft or 40‑ft containers, with rolls or bulk bags packed to a total weight of roughly 1,000 - 1,200 kg per container, depending on the material density.

How can I verify the barrier performance of the aluminum foil spout pouch?

Barrier performance is measured by water vapor transmission rate (WVTR); buyers should request a WVTR test report showing values below 0.1 g/m²·24 h for standard food‑grade foil.

What documentation should I request before placing an order?

Request material safety data sheets (MSDS), product specifications, test reports for tensile strength, seal strength, barrier ratings, and any regulatory compliance certificates relevant to the intended market.