About NINGBO KOMINS AUTO SPARE PARTS CO., LTD - Automobile Spare Parts & Supplies Supplier in China

China‑based NINGBO KOMINS AUTO SPARE PARTS CO., LTD lists ten active products across the Tools & Instruments and Automobile Spare Parts & Supplies categories. The catalogue includes an electric fuel pump, control arm, tensioner series, brake series, oil pressure switch, shock absorber, ball joint series, fender series, C V joint, and an auto water pump whose HS code is 8413.30 and is built with an aluminum alloy housing and a steel impeller. Each entry is recorded under the relevant HS chapter, for example the water pump falls under chapter 84 (machinery) while suspension components such as control arms and shock absorbers are classified in chapter 87 (vehicles). The supplier’s product list reflects common OEM‑type components used in passenger‑car and light‑truck assemblies. Export data show that Chinese manufacturers of these parts typically ship to markets in North America, Europe and Southeast Asia.

China’s automotive parts market is heavily integrated with global supply chains, and NINGBO KOMINS provides items that align with standard vehicle manufacturer specifications. The product set covers both power‑train accessories (fuel pump, water pump) and chassis elements (control arm, ball joint, shock absorber, C V joint). The inclusion of HS codes, such as 8413.30 for the water pump, helps buyers quickly identify tariff treatment and regulatory requirements. The catalogue does not specify certifications, so buyers should verify compliance with applicable quality standards before purchase. Overall, the supplier offers a focused selection of ten parts that match typical replacement and aftermarket demand.

Product Range and Specialties of NINGBO KOMINS AUTO SPARE PARTS CO., LTD

The catalogue’s ten items span key subsystems of a vehicle. Electric fuel pumps are usually rated by flow capacity (e.g., 150‑250 L/h) and pressure output (up to 3 bar), while auto water pumps are cast in aluminum alloy housings with steel impellers, matching the HS‑84.30 description for liquid‑pumping machinery. Suspension components such as control arms, ball joints and shock absorbers are commonly fabricated from forged steel or high‑strength alloy steel, with shock absorbers measured by damping force (e.g., 1,500‑2,500 N). C V joints and fender assemblies are typically stamped from sheet metal and may carry surface treatments like zinc plating. Industry standards for these parts include SAE grades for steel (e.g., SAE 1045) and ISO 16750 for environmental conditions. Buyers should expect material specifications and dimensional tolerances that conform to OEM drawings rather than generic descriptions.

Trade and Export Information - NINGBO KOMINS AUTO SPARE PARTS CO., LTD

Chinese exporters of automotive spare parts routinely use FOB or CIF terms, with cargo packed in wooden crates or corrugated boxes to suit 20‑ft and 40‑ft containers. The HS code 8413.30 for the water pump places it in the tariff line for pumps, compressors and similar machinery, which often requires a CE declaration for EU entry and an EPA statement for the United States. Suspension and chassis parts fall under HS 8708, a chapter where customs authorities frequently request a test report confirming compliance with ISO 16750‑2 (mechanical vibration) and a material safety data sheet. Typical importers are automotive manufacturers, aftermarket distributors and large‑scale service centers in the United States, Germany, the United Kingdom and Thailand. Buyers should be prepared to provide a commercial invoice, packing list and, where required, a certificate of origin to benefit from any preferential duty rates under the China‑ASEAN Free Trade Area or the EU‑China trade agreements.

Sourcing from NINGBO KOMINS AUTO SPARE PARTS CO., LTD - Buyer Guidance

When sourcing from NINGBO KOMINS, request a product data sheet that lists material grades, dimensional tolerances and performance ratings such as pump flow rate or shock absorber damping force. Ask for a third‑party test report (e.g., SGS or Intertek) covering ISO 16750 environmental tests for chassis components and ISO 9001 quality‑management certification, even though the supplier does not list certifications in its catalogue. Verify the HS code alignment on the commercial invoice to avoid customs delays; for the water pump use 8413.30 and for suspension parts use HS 8708‑xx series. Confirm packaging details - typically inner cartons of 20‑25 kg each, placed in a wooden pallet - and ask for a pre‑shipment inspection if required by the buyer’s import regulations. Finally, clarify minimum order quantities, which for most Chinese auto‑parts exporters range from 500 to 1,000 units per SKU, and negotiate lead times of 30‑45 days after order confirmation.

What HS code should be used for the auto water pump from NINGBO KOMINS?

The auto water pump is classified under HS code 8413.30, which covers pumps, compressors and similar machinery.

Which material is specified for the water pump housing?

The catalogue states the water pump has an aluminum alloy housing combined with a steel impeller.

What typical certifications should a buyer request for the suspension components?

Buyers usually request ISO 9001 quality‑management certification, IATF 16949 for automotive quality, and test reports confirming compliance with ISO 16750‑2 environmental standards.

How are the shock absorbers typically packaged for export?

Shock absorbers are commonly packed in corrugated cardboard boxes, grouped in cartons of 20‑25 kg, and then loaded onto wooden pallets for container shipment.

What are the common performance specifications for the electric fuel pump?

Electric fuel pumps are generally specified by flow rate (150‑250 L/h) and maximum pressure (up to 3 bar), along with voltage rating (12 V or 24 V) to match vehicle electrical systems.

Which markets most frequently import these automotive parts from China?

Major import markets include the United States, Germany, the United Kingdom and Thailand, where OEMs and aftermarket distributors source replacement and repair parts.

What documentation is needed for customs clearance of the control arm?

Customs typically require a commercial invoice, packing list, certificate of origin and, if applicable, a test report confirming compliance with relevant ISO or SAE standards.

What is a typical lead time for an order of 1,000 ball joints?

Lead times for a batch of 1,000 ball joints from Chinese manufacturers generally range from 30 to 45 days after order confirmation, depending on production scheduling and shipping arrangements.