About Miatlantic O - Earphones/Headphone Supplier in Estonia

Estonia hosts the supplier Miatlantic O, which currently lists ten active products across multiple electronic categories. The catalogue covers earphone and headset accessories, laptops and notebooks, uninterruptible power supplies, network switches, barcode scanners, and high‑voltage switchgear. The listed top categories include Earphones/Headphone, Laptops, Notebooks & ThinkPad, Electronic Cash Registers & Barcode Scanners, Books, Magazines, Music & Entertainment, UPS, Converters & Switches, and EHV Switch Yards. Each product is identified with its HS‑code where applicable, linking the range to the relevant customs tariff sections. The supplier’s portfolio reflects a focus on consumer electronics and industrial switching equipment.

Specific entries include a Convertible Headset (HS 8518.30) built from ABS plastic housing, stainless‑steel ear‑hook wire and foam cushions, and a USB Headset H390 (HS 8518.30) with synthetic‑leather ear pads and copper/steel wiring. The barcode‑scanner (HS 8471.60) and the Zebra DS3678‑SR handheld reader (HS 8471.90) both feature ABS plastic housings with internal semiconductor components. An Automatic Transfer Switch (HS 8537.10) is described as a galvanized‑steel enclosure with copper busbars, while the D‑Link DGS‑1250‑52XMP network switch is listed without an HS code but falls under the 85 380 series for switching equipment. Additional products such as a Smart‑UPS line‑interactive unit, a ThinkCentre Tiny‑In‑One desktop and generic laptop/notebook models complete the offering.

Product Range and Specialties of Miatlantic O

The Miatlantic O catalogue contains headsets, barcode readers, UPS units, a network switch and a high‑voltage transfer switch. Headsets in the 8518.30 HS band are typically tested for frequency response between 20 Hz and 20 kHz, impedance of 32 Ω, and include detachable cables that meet IEC 60268‑7. Barcode scanners classified under 8471.60 or 8471.90 usually employ laser or imaging sensors with scan rates of 200  -  400 lines per second and support 1D/2D symbologies.

Laptops and notebooks, while not assigned HS codes in the data, are normally covered by HS 8471.30 and feature processors ranging from Intel i5 to i7, RAM up to 32 GB, and SSD storage of 256 GB or higher. UPS systems such as the Smart‑UPS line‑interactive 9 AC fall under HS 8504.40 and are commonly rated at 9 kVA with battery runtime of 10‑15 minutes at full load. The D‑Link network switch belongs to the 85 380 category, offering 48 × 10/100/1000 Mbps ports, PoE capability up to 30 W per port, and compliance with IEC 60950‑1 for safety.

Trade and Export Information - Miatlantic O

Estonia, as an EU member, applies the EU customs tariff and requires CE marking for electrical and electronic equipment exported under HS chapters 84 and 85. Exporters of headsets, laptops, UPS units and switching gear typically ship to Western Europe, the Nordics, the United Kingdom and North America using FOB Tallinn or CIF Baltic ports. Buyers often request RoHS compliance certificates, FCC IDs for the US market, and test reports such as IEC 60950‑1 safety and IEC 62368‑1 for audio devices.

The HS 8518.30 and 8471.60/8471.90 families are subject to EU inspection regimes that may include random sampling under the EU’s Market Surveillance Regulation. Packaging for electronic devices is generally in anti‑static polybags, boxed with cushioning, and sized for 20‑foot or 40‑foot containers. Logistics norms favor air freight for low‑volume headset orders and sea freight for bulk UPS or switchgear shipments, with Incoterms FOB or CIF most commonly used.

Sourcing from Miatlantic O - Buyer Guidance

When sourcing from Miatlantic O, buyers should request CE Declaration of Conformity, RoHS test reports and, where applicable, FCC certification for headset and scanner models. For the Automatic Transfer Switch and network switch, an IEC 60950‑1 or IEC 61850 compliance statement is typical. Obtaining a product datasheet that lists material composition, voltage ratings, weight and dimensions helps verify the listed HS codes.

Samples of headsets and barcode readers can be requested to assess audio quality, microphone sensitivity and scan accuracy. Verify that the ABS plastic housing complies with fire‑retardant standards such as EN 71‑3. Confirm packaging details, MOQ (often 50‑100 units for accessories, 10‑20 units for UPS or switches) and lead time, which for most items ranges from 15 to 30 working days after order confirmation.

What product categories does Miatlantic O list?

They list earphones/headsets, laptops and notebooks, UPS units, network switches, barcode scanners, and high‑voltage switchgear, covering ten distinct SKUs.

Which HS codes are associated with the headsets and scanners?

The Convertible Headset and USB Headset H390 are filed under HS 8518.30, the Barcode‑Scanner under HS 8471.60 and the Zebra DS3678‑SR handheld reader under HS 8471.90.

What certifications should a buyer request for the electronic devices?

Buyers typically request CE marking, RoHS compliance, and, for US‑bound items, FCC certification; safety test reports such as IEC 60950‑1 or IEC 62368‑1 are also standard.

What are typical technical specifications for the headsets?

Standard headsets in the 8518.30 band have a frequency response of 20 Hz - 20 kHz, impedance around 32 Ω, detachable PVC cables, and foam or synthetic‑leather ear cushions.

What are the common specifications for the barcode scanners?

Scanners in the 8471 series usually feature a scan rate of 200 - 400 lines per second, support 1D and 2D symbologies, operate on a 5 V USB supply, and are housed in ABS plastic with internal semiconductor components.

What packaging and shipping formats are used?

Products are packed in anti‑static polybags inside corrugated boxes, with dimensions optimized for 20‑foot or 40‑foot containers; sea freight is common for bulk items, while air freight is used for low‑volume accessories.

What is the typical MOQ and lead time?

Minimum order quantities are often 50 - 100 units for accessories like headsets and scanners, and 10 - 20 units for UPS or switchgear, with lead times ranging from 15 to 30 working days after order confirmation.