About Mas Caster Sdn. Bhd. - Caster, Castor Wheels Supplier in Malaysia

Mas Caster Sdn. Bhd. operates from Malaysia and currently lists six active products in its online catalogue. The catalogue includes a general line titled "Casters And Wheels Made In Malaysia", a specific "Shopping Cart Casters In Malaysia", and "Shopping Trolley Casters Made In Malaysia" which is recorded under HS code 8302.20 and uses a polyurethane or rubber tread on a steel or nylon core. Additional entries are "Industrial Casters In Malaysia" (HS code 8302.20) with material options of nylon, polyurethane, rubber or steel, "Industrial Kitchens Casters In Malaysia" (HS code 8302.20) built from stainless steel 304 with a polyurethane wheel, and "MASROLLEN Casters In Malaysia" (HS code 8302.20) offered in nylon, polyurethane, rubber and steel constructions.

All six items fall under HS chapter 83, specifically heading 8302.20 which covers parts and accessories of vehicles, a classification commonly used for caster wheels. The product descriptions indicate a range of core materials - steel, nylon, and stainless steel 304 - combined with polyurethane or rubber treads, reflecting typical material mixes for load‑bearing and corrosion‑resistant applications. The catalogue does not specify load ratings, wheel diameters or brake types, but the material list aligns with industry practice for indoor material handling equipment.

Product Range and Specialties of Mas Caster Sdn. Bhd.

The catalogue’s product set covers general‑purpose casters, shopping‑cart wheels, trolley casters, industrial‑grade casters, kitchen‑environment casters and a branded line called MASROLLEN. Each is classified under HS code 8302.20 and is described by its primary material composition.

In the caster market, polyurethane treads are graded by durometer (e.g., 70‑80 Shore A) and load capacity ranging from 500 kg to 5 t per wheel. Nylon cores are common for light‑to‑medium loads up to 1 t, while steel or stainless‑steel 304 cores support heavier loads and resist corrosion in food‑service environments. Standard dimensions include wheel diameters of 100 mm, 150 mm or 200 mm and widths of 50 mm to 100 mm, with swivel or rigid mounting options and optional brakes. Industry specifications such as DIN 540 for caster dimensions and ISO 9001 quality management are typical references for buyers.

Trade and Export Information - Mas Caster Sdn. Bhd.

Malaysia is a recognized exporter of caster wheels, with shipments primarily destined for the United States, European Union members, Japan and the Middle East. The HS code 8302.20 triggers standard customs procedures, and many importing countries require a CE declaration for EU markets or an ASTM test report for load capacity in the United States.

Typical export packaging involves bulk cardboard cartons or wooden crates, each containing 200‑400 casters depending on wheel size, and loaded into 20‑ft containers that can hold up to 12 000 kg of product. Buyers often negotiate FOB Malaysia Port Klang or CIF destination, and must ensure compliance with material safety data sheets (MSDS), load test certificates, and any anti‑dumping duties that may apply under the 8302.20 heading.

Sourcing from Mas Caster Sdn. Bhd. - Buyer Guidance

When sourcing casters from Mas Caster, buyers should request detailed product data sheets that list wheel diameter, width, load rating (kN), durometer of the polyurethane, and brake type if applicable. Sample units should be examined for tread hardness, core integrity and dimensional tolerance before confirming bulk orders.

Standard documentation includes an ISO 9001 certificate (if held by the supplier), a CE Declaration of Conformity for EU shipments, and a third‑party load test report conforming to ISO 15545‑5. Buyers are advised to verify the material composition against the MSDS and confirm that stainless‑steel 304 components meet ASTM A240 specifications for corrosion resistance.

What categories of casters are listed by Mas Caster Sdn. Bhd.?

The supplier lists six product categories: general casters and wheels, shopping‑cart casters, shopping‑trolley casters, industrial casters, industrial‑kitchen casters, and the MASROLLEN branded casters, all recorded under HS code 8302.20.

Which HS code is applied to the caster products in the catalogue?

All items that include an HS code are classified under 8302.20, which belongs to Chapter 83 for parts and accessories of vehicles, the standard code for caster wheels.

What materials are used for the industrial kitchen casters?

The industrial kitchen casters are described as having a stainless‑steel 304 core combined with a polyurethane wheel, a material combination chosen for corrosion resistance and smooth rolling in food‑service environments.

What load capacities are typical for the industrial casters offered?

While the catalogue does not state exact capacities, industrial casters with steel or nylon cores from Malaysian manufacturers commonly support loads between 500 kg and 3 t per wheel, depending on wheel diameter and tread material.

Which certifications should a buyer verify for Malaysian casters?

Buyers should request an ISO 9001 quality‑management certificate, a CE Declaration of Conformity for EU destinations, and a third‑party load‑test report that complies with ISO 15545‑5 or ASTM F2296.

How are the casters packaged for export?

Export shipments are typically packed in bulk cardboard boxes or wooden crates, with 200‑400 units per crate, and loaded into 20‑ft containers that accommodate up to 12 t of casters, complying with standard INCOTERMS such as FOB Port Klang.

What is a common lead time for an order from Mas Caster?

Lead times generally range from 4 to 6 weeks after receipt of a confirmed purchase order and required test documentation, though exact timing depends on product specifications and order volume.

Can sample casters be obtained before a full order?

The supplier can provide sample units for evaluation of material hardness, wheel dimensions and load performance; buyers should request a sample quote and specify the desired model and material.