About Macrox Print Sdn Bhd - Industrial and Food Packaging Supplier in Malaysia

Macrox Print Sdn Bhd is a Malaysia-based packaging converter operating an active catalogue of 5 stock-keeping units concentrated entirely in printed cartons, boxes, and paper carriers. Its listed range spans four overlapping categories: Industrial Packaging Boxes, Food Packaging Boxes, Packaging Items & Containers, and Paper Bags, with every SKU carrying a customized print or structural specification rather than a generic plain-stock item. The supplier is registered in Malaysia, a country that sits among the leading Southeast Asian producers of folding cartons, corrugated shippers, and kraft paper bags, supplying both domestic FMCG brands and regional export markets across ASEAN, the Middle East, and East Africa. The five SKUs in the catalogue cover the three principal packaging formats that Malaysian converters typically run on a single plant: litho-laminated folding cartons for food and consumer goods, corrugated e-flute mailers for e-commerce and last-mile delivery, rigid hard-cover setup boxes for premium gifting and electronics, and twisted-handle or flat-handle kraft paper bags for retail takeaway. With 5 active listings spread across these four categories, Macrox Print Sdn Bhd operates as a short-run, customization-oriented converter rather than a high-volume commodity mill, which is a common profile for Malaysian printers serving brand owners who require bespoke dielines, Pantone-matched inks, and variable print runs.

Product Range and Specialties of Macrox Print Sdn Bhd

The Macrox Print Sdn Bhd catalogue covers five customized SKUs: a Customized Food Packaging Box, a generic Customized Packaging Box, a Customized Paper Bag, a Customized Delivery Box in E-Flute corrugated board, and a Customized Hard Cover Box at a Premium grade. Food-grade cartons in this segment are typically produced on coated SBS (solid bleached sulfate) or FBB (folding box board) stocks in the 210-350 gsm range, with options for PE or PLA lamination, aqueous coating, or UV varnish to meet direct-contact or grease-resistance requirements. E-flute corrugated delivery boxes, with a typical flute thickness of 1.2-1.5 mm, are the standard format for e-commerce mailers and subscription-box shippers and are usually specified by burst strength (ECT or Mullen), with ECT32 to ECT44 being the most common tiers for shipments up to 20 kg. Hard-cover premium boxes in this category are typically wrapped with 157 gsm art paper over greyboard or chipboard cores in 1.5-3 mm thickness, often finished with matte or gloss lamination, foil stamping, or spot UV. Paper bags in Malaysian converter output are predominantly manufactured from 100-150 gsm kraft paper (recycled or virgin, with FDA / food-contact variants available) in twisted-handle, flat-handle, or patch-handle constructions, and are widely specified by retail and F&B buyers for takeaway, bakery, and boutique use. Across all five SKUs, the common thread is customization of dieline, print, and finish rather than off-the-shelf stock, which positions the range for brand owners and private-label buyers rather than commodity procurement.

Trade and Export Information - Macrox Print Sdn Bhd

Packaging goods exported from Malaysia typically fall under HS chapter 48 (paper and paperboard, articles of paper pulp, cellulose wadding or webs of cellulose fibres), with folding cartons commonly classified under 4819.10 (cartons, boxes and cases of corrugated paper or paperboard), 4819.20 (folding cartons, boxes and cases of non-corrugated paper or paperboard), and 4819.30 (sacks and bags of paper, paperboard, cellulose wadding or webs of cellulose fibres having a base width of 40 cm or more). Hard-cover setup boxes typically fall under 4819.50 (other packing containers, including record sleeves). Exporters of printed cartons and paper bags from Malaysia typically ship to ASEAN neighbours (Singapore, Indonesia, Thailand, Vietnam, the Philippines), the Middle East (UAE, Saudi Arabia), East Africa (Kenya, Tanzania), and South Asia, with growing demand from e-commerce and FMCG brand owners. For food-contact packaging, buyers in the EU, US, and Gulf markets typically require documentation confirming compliance with FDA 21 CFR (for the US market), EU Regulation 1935/2004 and 2023/2006 (for EU food contact), and Halal certification for shipments into Indonesia, Malaysia, and the Middle East. Standard shipping norms for this category are flat-packed cartons strapped on wooden pallets, typically loaded into 20 ft containers (which hold roughly 8-12 pallets depending on dimensions) or 40 ft HQ containers for larger export runs. Common Incoterms used by Malaysian packaging exporters are FOB Port Klang, CIF, and EXW, with sea freight via Port Klang or Tanjung Pelepas being the standard export channel. FSC Chain of Custody certification is increasingly requested by European and Australian buyers to confirm fibre sourcing, while ISO 9001 quality management certification is a baseline expectation for converters supplying multinational brand owners.

Sourcing from Macrox Print Sdn Bhd - Buyer Guidance

Buyers sourcing customized packaging from a Malaysian converter such as Macrox Print Sdn Bhd should request a printed proof or physical sample (commonly called a press-proof or dummy) before confirming a production run, as colour matching to Pantone references and substrate GSM cannot be reliably verified from digital artwork alone. For food-contact SKUs (the Customized Food Packaging Box), buyers should request a food-grade compliance statement covering FDA, EU 1935/2004, or the relevant Gulf Standard (GSO) depending on destination market, along with migration test reports where direct contact with wet or fatty foods is involved. For the E-Flute delivery box, the buyer should confirm the ECT (Edge Crush Test) rating in kN/m or the Mullen burst strength in psi, and request a drop-test report if the carton will be used for courier shipments above 5 kg. For the Customized Hard Cover Box (Premium), buyers should specify greyboard thickness (commonly 1.5, 2.0, or 3.0 mm), wrap paper GSM and finish (matte/gloss lamination, soft-touch, foil, spot UV), and request a finished sample rather than relying on digital mock-ups. Across all five SKUs, standard documents to request are a commercial invoice, packing list, certificate of origin (for ASEAN FTA preferential tariff claims), and a FSC or PEFC chain-of-custody statement if fibre provenance matters to the buyer's downstream brand. Lead times for customized Malaysian print runs typically run 10-21 working days after artwork approval for folding cartons and paper bags, and 20-35 days for rigid setup boxes, with MOQs commonly starting at 500-1,000 units for cartons and 300-500 units for rigid boxes depending on board size and print complexity.

What product categories does Macrox Print Sdn Bhd supply?

The supplier lists 5 active SKUs across four categories: Industrial Packaging Boxes, Food Packaging Boxes, Packaging Items & Containers, and Paper Bags. The range includes customized folding cartons, E-flute corrugated delivery boxes, rigid hard-cover premium boxes, and kraft paper bags, all produced to buyer specifications.

Which HS codes apply to the packaging items in this catalogue?

Corrugated E-flute delivery boxes typically classify under HS 4819.10, non-corrugated folding cartons (including food packaging) under 4819.20, paper bags under 4819.30, and rigid hard-cover setup boxes generally under 4819.50. Buyers should confirm the exact classification with their customs broker based on the finished article and declared materials.

What certifications should a buyer request for food-contact packaging?

For the Customized Food Packaging Box, buyers should request documentation covering FDA 21 CFR (US), EU Regulation 1935/2004 and 2023/2006 (EU), or GSO standards for Gulf markets, along with migration test reports where the carton contacts wet, fatty, or acidic foods. Halal certification is commonly required for shipments into Indonesia, Malaysia, and the Middle East.

What specifications should be confirmed for the E-Flute delivery box?

Buyers should request the ECT (Edge Crush Test) rating in kN/m or the Mullen burst strength in psi, the flute thickness (typically 1.2-1.5 mm for E-flute), the board grade (single-wall or double-wall), and a drop-test report if the carton is intended for courier shipments above 5 kg gross weight.

What is the typical MOQ and lead time for customized Malaysian packaging?

MOQs for customized folding cartons and paper bags from Malaysian converters typically start at 500-1,000 units, while rigid hard-cover boxes usually start at 300-500 units depending on size and print complexity. Production lead time is commonly 10-21 working days after artwork approval for cartons and bags, and 20-35 days for rigid setup boxes.

How should buyers verify print quality and colour accuracy before production?

Buyers should request a physical press-proof or pre-production dummy on the actual substrate, not just a digital mock-up, since Pantone matching and substrate finish (matte, gloss, soft-touch, foil) can only be verified on a printed sample. A signed-off hard-copy proof should be retained as part of the production file.

What packaging and shipping format is standard for Malaysian carton exports?

Cartons are typically flat-packed, strapped onto wooden pallets, and loaded into 20 ft (roughly 8-12 pallets) or 40 ft HQ containers for export. Common Incoterms are FOB Port Klang, CIF, and EXW, with sea freight via Port Klang or Tanjung Pelepas being the standard export channel.

What documents should accompany a shipment of customized packaging from Malaysia?

Standard export documents include a commercial invoice, packing list, and certificate of origin (Form E or Form AK under ASEAN FTAs where applicable). Buyers requiring verified fibre sourcing should also request an FSC or PEFC Chain of Custody certificate, and ISO 9001 documentation is commonly requested by multinational brand owners.