About Kriti Exims - Medical PPE Supplier in India

India hosts Kriti Exims with an active catalogue of five distinct medical‑grade products. The supplier lists a 2‑ply surgical face mask, a 3‑ply face mask, a surgeons cap, latex examination gloves and a 6 cm crepe bandage, matching the top categories of face masks, disposable caps, latex gloves and medical dressings. Each product falls under the standard medical PPE classifications used in global trade, and the catalogue reflects a focused offering rather than a broad industrial line. The listing does not include additional items beyond these five, and no HS codes are provided in the source data.

The five items are presented without any stated certifications, so buyers should verify compliance with applicable standards such as ASTM F2100 for masks or ASTM D3578 for latex gloves. The supplier’s tier is marked as “imported” with a “harbor” trust level, indicating that the business operates as an exporter from India to international markets. No further corporate history or capacity figures are supplied, keeping the profile strictly product‑centric.

Product Range and Specialties of Kriti Exims

Kriti Exims offers a 2‑ply surgical face mask and a 3‑ply face mask that are typical of disposable respiratory protection. In the broader market, 2‑ply masks often meet ASTM F2100 Level 1 or EN 14683 Type I, while 3‑ply masks commonly target Level 2 or Type II/IIR performance, featuring a melt‑blown filter layer and ear loops. The surgeons cap is a disposable head covering made from non‑woven polypropylene, usually supplied in bulk packs of 1,000 pieces per carton. Latex examination gloves listed by the supplier are single‑use, powder‑free gloves that in the industry conform to ASTM D3578 and EN 455 standards, with typical thicknesses ranging from 0.10 mm to 0.20 mm and tensile strength around 12 - 18 MPa. The crepe bandage, described as 6 cm wide, is a standard medical dressing used for compression and wound support, commonly sold in rolls of 5 m length and meeting ISO 14726 for absorbency and tensile properties. All five products are standard PPE items that buyers encounter in hospitals, clinics and emergency response kits.

Industry practice groups these items under HS chapter 30 (medical supplies) and chapter 63 (textiles) for masks and caps, while latex gloves fall under HS 4015. The supplier’s catalogue does not disclose packaging dimensions, but typical export packs include sealed polyethylene bags for gloves, bulk cartons for masks (usually 50 pcs per inner box, 500 pcs per outer carton) and cardboard boxes for bandages. These packaging formats align with common logistics handling for medical consumables.

Trade and Export Information - Kriti Exims

India is a major exporter of disposable medical protective equipment, supplying Asia‑Pacific, Middle East and African markets through sea freight in 20‑ft or 40‑ft containers. Buyers of Indian‑origin PPE often require compliance with ISO 13485 quality management, as well as product‑specific certifications such as CE marking for European imports or FDA registration for the United States. Although Kriti Exims does not list certifications, importers typically request test reports confirming bacterial filtration efficiency (BFE ≥ 95 % for 2‑ply masks), particle filtration efficiency (PFE ≥ 95 % for 3‑ply masks), and glove tensile strength data. Standard Incoterms used for these shipments include FOB Mumbai or CIF Dubai, with containers sealed and temperature‑controlled if required for glove integrity.

Regulatory bodies in destination countries may also demand a Certificate of Origin and a declaration of compliance with the destination’s medical device regulations. Indian exporters of PPE frequently work with third‑party inspection agencies such as SGS or Bureau Veritas to provide pre‑shipment verification, especially for large bulk orders. The supplier’s “harbor” trust tier suggests that prior trade performance has been recorded, but buyers should still conduct due‑diligence on documentation before finalizing contracts.

Sourcing from Kriti Exims - Buyer Guidance

When sourcing from Kriti Exims, buyers should request product test certificates that reference the relevant ASTM or EN standards for each item. For masks, ask for BFE, PFE and differential pressure results; for gloves, request tensile strength, elongation at break and an allergen‑free statement; for the crepe bandage, ask for absorbency and tensile strength data. Sample units are normally provided in sealed poly bags for masks and gloves, and a rolled segment for the bandage, allowing verification of material feel and dimensions before a full order.

Buyers should also confirm the supplier’s export documentation package, which typically includes a commercial invoice, packing list, Certificate of Origin, and any required sanitary or phytosanitary certificates for medical goods. Verifying that the supplier can meet standard lead times - often 15‑30 days for production and 7‑14 days for container loading - helps align procurement schedules. If the buyer’s market requires CE or FDA registration, the supplier must be able to furnish a declaration of conformity or a US FDA registration number.

What are the standard specifications for the 2‑ply and 3‑ply masks offered by Kriti Exims?

The 2‑ply mask typically meets ASTM F2100 Level 1 or EN 14683 Type I, with a BFE of at least 95 % and a differential pressure under 5 mm H₂O/cm². The 3‑ply mask usually complies with Level 2 or Type II/IIR, providing a BFE of 98 % or higher and a PFE of 98 % for 0.1 µm particles.

Which certifications should a buyer request for the latex examination gloves?

Buyers should ask for test reports referencing ASTM D3578 or EN 455, covering tensile strength (12‑18 MPa), elongation at break (≥ 300 %), and a powder‑free, latex‑allergy statement. A copy of the supplier’s ISO 13485 quality‑system certificate is also common.

How are the surgical caps packaged for export?

Export packs for disposable caps are usually sealed in polyethylene bags with 100 caps per bag, placed in cardboard cartons holding 1,000 caps each. The cartons are then palletised for sea freight.

What are typical lead times for a full container order of the listed products?

Manufacturing lead times are generally 15‑30 days, followed by 7‑14 days for container stuffing, documentation and freight booking. Total door‑to‑door time can range from 25 to 45 days depending on the destination port.

Which HS chapters are relevant for these products when shipping internationally?

Face masks and caps fall under HS Chapter 63 (textiles), while latex examination gloves are classified under HS Chapter 40 (rubber and plastics). The crepe bandage is also covered by Chapter 63 as a medical textile.

What documentation is essential for importing these medical PPE items?

Essential documents include a commercial invoice, packing list, Certificate of Origin, product test certificates (BFE/PFE for masks, tensile tests for gloves), and any destination‑specific regulatory approvals such as CE Declaration of Conformity or FDA registration.