About Kingsun Baby Products Co., Ltd. - Baby Products Supplier in China

Kingsun Baby Products Co., Ltd. is based in China and lists nine active SKUs spanning baby feeding and care items. The catalogue includes narrow‑neck polypropylene milk bottles (HS 3923.30), silicone spoons (HS 3924.10), TPU/Silicone bibs (HS 6209.90), normal‑neck feeding bottles (no HS provided), silicone pacifiers (HS 4014.90), EVA water‑filled teethers (HS 9503.00), silicone bottle nipples (HS 4014.90), manual breast pumps (HS 9018.90), and silicone chewing toothbrushes (HS 9603.21). All products are described as BPA‑free and use food‑grade polymers such as polypropylene, silicone, TPU, EVA and silicone rubber. The supplier’s trust tier is listed as “harbor,” indicating a moderate level of verification on the platform.

The product set focuses on infant feeding accessories, oral development tools, and protective apparel, each assigned to relevant HS chapters for plastics (chapter 39), textile accessories (chapter 62), medical devices (chapter 90), and toys (chapter 95). Materials are specified as platinum‑cured silicone or FDA‑compliant polymers, which aligns with common safety expectations for baby goods. The catalogue does not include explicit certifications, so buyers typically request compliance documents such as FDA food‑contact statements, EU REACH or LFGB test reports, and material safety data sheets. Export volumes are not disclosed, but the nine SKUs cover the core functional categories for newborn and infant care.

Product Range and Specialties of Kingsun Baby Products Co., Ltd.

The listed items fall under two major industry segments: infant feeding equipment and baby care accessories. Polypropylene bottles in HS 3923.30 are usually produced to meet ISO 9001 quality management and conform to food‑contact regulations such as FDA 21 CFR 177.1520; standard specifications include wall thickness of 0.3 - 0.5 mm and a capacity of 120 - 250 ml. Silicone feeding spoons and pacifiers (HS 3924.10 and 4014.90) are typically graded by hardness (Shore A 20 - 30) and must pass migration tests for BPA, phthalates and heavy metals. EVA water‑filled teethers (HS 9503.00) are classified as toys and often require CE marking and compliance with EN 71‑1/71‑2 for mechanical and chemical safety. Manual breast pumps under HS 9018.90 are considered medical devices and usually need a CE mark or FDA 510(k) clearance, with performance metrics such as suction pressure (kPa) and cycle speed.

TPU bibs (HS 6209.90) are produced in thickness 0.2 - 0.4 mm, with waterproof coatings meeting ISO 11644 for child safety. Silicone toothbrushes (HS 9603.21) are designed with bristle softness measured in durometer and must be free of toxic additives, often verified by LFGB or ASTM F963. These industry norms provide buyers with reference points for evaluating the supplier’s product specifications.

Trade and Export Information - Kingsun Baby Products Co., Ltd.

China is a leading exporter of baby feeding and care products, supplying North America, the European Union, and Southeast Asian markets. Products classified under HS 3923, 4014, 9018 and 9603 are routinely shipped in 20‑ft or 40‑ft containers with molded‑plastic pallets, and are subject to pre‑export inspections under China’s AQSIQ or CIQ for safety compliance. Importers in the United States and EU commonly request FDA food‑contact certification, EU REACH registration, and CE conformity for toy‑related items such as teethers and toothbrushes. The typical Incoterm for Chinese manufacturers is FOB Shanghai or CIF Los Angeles, with moisture‑proof packaging for silicone items to prevent deformation.

Regulatory review often includes laboratory analysis for residual BPA, phthalates and heavy metals, as well as performance testing for flow rate of bottle nipples (typically 5 - 8 ml/s) and suction capacity of breast pumps (approximately 80 - 120 kPa). Buyers should anticipate customs HS‑code verification and may be required to submit a Certificate of Origin and a test report aligned with ISO 22000 for food‑contact plastics. Seasonal demand peaks around back‑to‑school periods and major holidays, influencing lead times of 30 - 45 days from order confirmation.

Sourcing from Kingsun Baby Products Co., Ltd. - Buyer Guidance

When sourcing from Kingsun, buyers should request material safety data sheets (MSDS) for each polymer, along with FDA food‑contact letters or EU REACH registration numbers for the polypropylene and silicone items. For the EVA teethers and silicone toothbrushes, obtain CE test reports that reference EN 71‑1/71‑2 or ASTM F963, and verify that the silicone is 100 % platinum‑cured to ensure absence of residual catalysts.

Samples should be evaluated for dimensions (bottle capacity, nipple diameter, spoon length), hardness (Shore A for silicone), and water‑proof performance of the TPU bibs. Verify packaging specifications such as inner polybag thickness (≥0.05 mm) and outer carton dimensions that fit standard 20‑ft container loading plans (e.g., 1,200 units per pallet). Confirm lead time, typical minimum order quantity (often 5,000 units per SKU) and the supplier’s ability to provide third‑party inspection reports before shipment.

What material is used for the narrow‑neck baby milk bottle and which HS code applies?

The bottle is made from BPA‑free polypropylene (PP) and is classified under HS code 3923.30, the chapter for plastic bottles and containers.

Are the silicone spoons and pacifiers compliant with food‑contact regulations?

Both items are described as food‑grade silicone, platinum‑cured and BPA‑free. Buyers normally request FDA food‑contact statements or EU REACH documentation to confirm compliance.

What safety tests are required for the EVA water‑filled teether?

As a toy (HS 9503.00) it should pass EN 71‑1 mechanical safety and EN 71‑2 chemical safety tests, and typically needs a CE conformity certificate.

Which certifications are typical for the manual breast pump listed under HS 9018.90?

Manual breast pumps are considered medical devices; common certifications include CE marking for the EU market and FDA 510(k) clearance for the United States, together with performance data such as suction pressure.

What are the usual packaging and container quantities for the silicone toothbrushes?

Silicone toothbrushes (HS 9603.21) are usually packed in inner polybags of at least 0.05 mm thickness, placed in export cartons sized for 40‑ft containers, allowing roughly 1,200 units per pallet depending on carton dimensions.

What documentation should be requested before placing an order for the TPU bibs?

Buyers should ask for a Certificate of Origin, a test report confirming waterproof performance, and any applicable REACH or LFGB compliance certificates for the TPU material.

Is there a standard minimum order quantity for the baby feeding bottles?

Typical MOQ for Chinese baby‑product manufacturers is around 5,000 units per SKU, but the exact figure should be confirmed with the supplier for each bottle style.

How long is the usual lead time for a full container load of these products?

Lead times generally range from 30 to 45 days after order confirmation, depending on production scheduling and any required third‑party inspections.