About Kingfar Display Co., Ltd. - Children Furniture Supplier in China

Kingfar Display Co., Ltd. is based in China and currently lists five active products. The company’s catalogue focuses on children’s furniture and mobility accessories, as indicated by its top categories of Children Furniture, Car Seats, and Baby Walkers. The product set includes items that fall under the HS chapter 94 (furniture; seats) and HS chapter 95 (toys and sports equipment), which are typical classifications for high chairs, car seats, walkers, joggers and strollers. These goods are designed for use by infants and toddlers and are subject to safety testing standards common in the industry. The supplier’s imported tier and harbor trust tier suggest it operates through standard Chinese export channels. The listed products are a baby high chair, a safety car seat for babies, baby walkers, a baby jogger, and a baby stroller. Each item is typically constructed from a combination of BPA‑free plastics, powder‑coated steel frames, and textile upholstery. High chairs and car seats often require compliance with load‑bearing tests and stability criteria defined in standards such as ASTM F404 (high chairs) and EN 1888 (child car seats). Walkers and joggers are usually evaluated for wheel durability, braking performance, and maximum weight capacity, often expressed in kilograms. Strollers are commonly assessed for foldability, wheel size (e.g., 8‑10 inch), and canopy material UV protection. The catalogue does not provide HS codes for individual items, but the product family aligns with the cited HS chapters.

Product Range and Specialties of Kingfar Display Co., Ltd.

The catalogue from Kingfar Display Co., Ltd. comprises a baby high chair, a baby safety car seat, baby walkers, a baby jogger and a baby stroller. In the children’s furniture market these items are classified under HS 9401 (seats) for high chairs and car seats, and HS 9503 (toys and sporting goods) for walkers, joggers and strollers. Typical industry grades for high chairs include load‑bearing capacity of 15 kg and a seat height adjustment range of 30‑45 mm, while car seats are often rated for 0‑12 months and a maximum weight of 13 kg. Walkers commonly feature a frame strength of at least 300 N and a tread depth of 30‑40 mm; joggers and strollers are evaluated for wheel load rating of 150 kg and a maximum folded length of 60‑70 cm. Materials most often used in these categories are injection‑molded polypropylene for the shell, cold‑rolled steel for structural members, and polyester or nylon fabrics for seating pads. Finish options include powder coating with a hardness of 80 HB to resist scratches, and fabrics that meet Oeko‑Tex Standard 100 for low allergen content. Buyers frequently request certifications such as CE (for EU markets), ASTM F404/F406 (US), and ISO 9001 quality‑management documentation to verify compliance with these material and performance standards.

Trade and Export Information - Kingfar Display Co., Ltd.

China is a leading exporter of children’s furniture and mobility accessories, supplying North America, the European Union, and Southeast Asian markets through sea freight in 20‑ft and 40‑ft containers. The HS 9401 family for seats and HS 9503 family for walkers and strollers are subject to routine customs inspections that verify safety markings, material declarations and, where applicable, CE or ASTM conformity labels. Exporters typically adopt FOB Shanghai or Ningbo terms, with buyers arranging CIF or DDP to their destination ports. Buyers importing these goods usually require pre‑shipment inspection reports (e.g., SGS, Bureau Veritas) covering mechanical safety, chemical compliance (lead <0.05 mg/kg, phthalates <0.1 %), and packaging integrity. Standard packaging consists of double‑wall corrugated boxes, each holding a single unit or up to four units depending on size, and pallets stacked to a maximum height of 2.2 m for container loading. Chinese manufacturers often hold ISO 9001 and may provide factory audit reports upon request, although Kingfar Display’s specific certifications are not listed in the supplied facts.

Sourcing from Kingfar Display Co., Ltd. - Buyer Guidance

When sourcing from Kingfar Display Co., Ltd., buyers should request the latest product test reports that reference the relevant safety standards (e.g., ASTM F404 for high chairs, EN 1888 for car seats). Samples of the plastic shell, steel frame and fabric upholstery should be examined for surface finish, weld quality and fabric durability before confirming bulk orders. Buyers are advised to verify that the supplier can provide CE Declaration of Conformity or equivalent ASTM certificates, as well as a copy of the factory’s ISO 9001 quality‑management system if available. It is also prudent to confirm the packaging list, container loading plan, and the Incoterm that will be used, so that customs duties and HS‑code classification can be accurately prepared. Any deviation from the stated material specifications or safety test results should be clarified before the production run is initiated.

What safety standards apply to the baby high chair offered by Kingfar Display?

The high chair is typically evaluated against ASTM F404 (US) and EN 716 (EU), which cover load‑bearing capacity, stability and the absence of sharp edges. Buyers should request the test certificate that cites these standards.

Does the baby car seat meet child‑safety certification requirements?

Car seats for infants are generally required to comply with EN 1888 (EU) or FMVSS 213 (US). Request the CE Declaration of Conformity or the corresponding US safety report to confirm compliance.

What materials are used in the baby walkers and how are they tested?

Walkers are usually made from injection‑molded polypropylene and steel reinforcement. They are tested for tip‑over resistance (minimum 300 N) and wheel durability, with results documented in a SGS or BV inspection report.

Can I obtain a sample of the baby jogger before placing a large order?

Yes, suppliers typically provide a functional sample that includes the frame, wheels and fabric canopy. Verify the sample’s wheel load rating (often 150 kg) and fabric UV‑protection rating.

What packaging format is used for the baby stroller when shipped internationally?

Strollers are packed in double‑wall corrugated boxes, usually one unit per box, and stacked on standard 120 cm x 100 cm pallets. The pallets are loaded into 20‑ft or 40‑ft containers with a maximum stack height of 2.2 m.

Which HS codes should I reference when importing these items?

Children’s seats such as high chairs and car seats fall under HS 9401, while walkers, joggers and strollers are classified under HS 9503. Confirm the exact sub‑heading with your customs broker.

What certifications should I request from Kingfar Display before finalizing a purchase?

Ask for CE Declaration of Conformity or ASTM test reports, and if available, an ISO 9001 quality‑management certificate. Additional documents may include a pre‑shipment inspection report and material safety data sheets.

What is the typical lead time for a bulk order of baby strollers from this supplier?

Lead times for Chinese children’s mobility products usually range from 30 to 45 days after order confirmation, depending on order size and production scheduling. Confirm the exact timeline in the purchase agreement.