About Ivory Trading FZE PE Plastic Scrap Supplier - Plastic Scrap Supplier in United Arab Emirates

United Arab Emirates, Sharjah, hosts Ivory Trading FZE PE Plastic Scrap Supplier, which currently lists nine active products in its catalogue. The catalogue covers PET bottle scrap (HS 3915.10), LDPE film scrap (HS 3901.10.00), HDPE bottle and drum scrap (HS 3915.10), polyurethane foam scrap (HS 3915.90), BOPP printed roll scrap (HS 3915.10), OCC waste paper scrap (HS 4707.10), electric motor scrap (HS 7404.00) and PMMA acrylic scrap (HS 3915.90). Each entry specifies the material type and the typical export format such as bales, rolls, lumps or drums. The product list reflects a focus on recyclable polymers, engineered foams and selected metal and paper streams.

The supplier’s active product count of nine includes both polymeric and non‑polymeric waste streams. Materials are described by their commercial names - for example PET bottle scrap, LDPE film, HDPE milk‑bottle scrap and HDPE drum regrind - and are aligned with the corresponding HS‑code families provided. Paper waste is listed under OCC (old corrugated containers) with its own HS code, while electric motor scrap is classified under the metal‑scrap chapter. The catalogue therefore spans HS chapters 39 (plastics), 47 (paper) and 74 (metals), giving buyers a clear reference for customs declarations.

Product Range and Specialties of Ivory Trading FZE PE Plastic Scrap Supplier

Ivory Trading FZE offers PET bottle scrap that is typically sorted to a clean, 100 % PET grade suitable for re‑grinding into flakes; industry standards often require moisture below 0.5 % and colour contamination under 1 %. LDPE film scrap is generally supplied in rolls or bales with thicknesses from 30 µm to 100 µm and melt‑flow index (MFI) values between 0.5 and 2.0 g/10 min (ASTM D1238). HDPE bottle and drum scrap is usually graded by melt‑flow index (0.2 - 5.0 g/10 min) and colour consistency, and may be delivered as bales of 1 - 2 tonne or as loose regrind. Polyurethane foam scrap is classified by density (30 - 150 kg m‑3) and closed‑cell versus open‑cell structure, with typical purity above 95 %. BOPP printed roll scrap is measured by basis weight (12 - 30 g m‑2) and print quality, and is often baled in 500 kg bundles. OCC waste paper is graded by recovered content (70‑80 %) and moisture (8‑10 %) and is usually shipped in compressed bales. Electric motor scrap is evaluated for copper recovery (60‑80 % Cu) and steel housing weight, and is commonly exported as bulk scrap in 20‑ft containers. PMMA acrylic scrap is supplied as re‑grind or sheets with optical purity above 95 % and an MFI of 2‑5 g/10 min.

Trade and Export Information - Ivory Trading FZE PE Plastic Scrap Supplier

The United Arab Emirates serves as a regional hub for re‑export of recyclable plastics, paper and metal waste, with Sharjah’s logistics zones providing direct access to container vessels. Exporters of PET, LDPE, HDPE and other polymeric scraps typically ship to China, India, the European Union and Turkey, where downstream recyclers demand consistent HS‑code declarations (e.g., 3915.10 for most plastic waste, 3901.10.00 for LDPE film). Common buyer requirements include REACH registration for plastic polymers, ISO 14001 environmental management certification, and for paper waste, FSC or PEFC chain‑of‑custody documentation. Electric motor scrap often triggers RoHS and WEEE compliance checks in EU markets, and buyers usually request a metal‑content analysis report. Standard packaging includes compressed bales of 1‑2 tonne, roll bundles of 500 kg, or bulk drums for HDPE, with container loading optimized for 20‑ft (≈15 tonne) or 40‑ft (≈30 tonne) units. Typical Incoterms are FOB Sharjah or CIF to the buyer’s port, allowing flexibility in freight arrangements.

Sourcing from Ivory Trading FZE PE Plastic Scrap Supplier - Buyer Guidance

Buyers should request a recent material analysis report that covers polymer type, moisture content, colour contamination and any prohibited additives before placing an order. For polymer grades, a melt‑flow index test (ASTM D1238) and a density measurement (ISO 1183) are standard verification documents; for metal scrap, a copper‑content assay (ASTM B193) is expected. Request certificates of origin, ISO 9001 or ISO 14001 compliance, and, where applicable, REACH or RoHS declarations to confirm regulatory conformity. Verify that the HS code used in the commercial invoice matches the product description to avoid customs delays. Typical minimum order quantities are 1 metric tonne per product, with a lead time of four to six weeks after order confirmation, allowing time for sorting, baling and container loading.

What types of plastic scrap does Ivory Trading FZE offer?

The catalogue includes PET bottle scrap, LDPE film scrap, HDPE bottle and drum scrap, polyurethane foam scrap, BOPP printed roll scrap and PMMA acrylic scrap, each identified by its HS‑code family.

How is PET bottle scrap packaged for export?

PET bottle scrap is usually compressed into bales weighing 1‑2 tonne, wrapped in stretch film and secured for container loading.

Which certifications should a buyer request for the plastic scrap?

Buyers typically ask for REACH registration, ISO 14001 environmental management certification and, if required, ISO 9001 quality management documentation.

What are the typical HS codes for the listed products?

Plastic waste such as PET, HDPE and BOPP is classified under HS 3915.10, LDPE film under HS 3901.10.00, PU foam and PMMA under HS 3915.90, OCC paper under HS 4707.10 and electric motor scrap under HS 7404.00.

What is the minimum order quantity for HDPE drum scrap?

The standard minimum order is 1 metric tonne, which can be supplied as a bale or as loose re‑grind depending on buyer preference.

What documentation is needed for importing electric motor scrap from the UAE?

Importers usually require a certificate of origin, a metal‑content assay report (copper and steel percentages), and compliance statements for RoHS and WEEE regulations.

How can a buyer obtain a sample of LDPE film scrap?

A sample batch of 10‑20 kg can be arranged; the supplier will ship the sample in a sealed bag with accompanying material‑analysis data.

What quality parameters are checked for PMMA acrylic scrap?

Buyers verify optical purity (typically >95 %), melt‑flow index (2‑5 g/10 min) and the absence of foreign polymer contamination before acceptance.