About Hebei Yunpeng Machinery Exp.& Imp. Trading Co.Ltd. - Machined Components Supplier in China

China‑based Hebei Yunpeng Machinery Exp.& Imp. Trading Co.Ltd. lists five active products in its catalogue. The company reports offerings across machined components, dies and mouldings, flanges and plastic items, covering stamping parts, an aluminum die‑casting handle, a forged stainless‑steel flange, pipe fittings and a plastic box. Each item is positioned for industrial applications that require precision machining or molding, with material selections such as aluminium alloys for the handle and stainless steel grades for the flange. The product set reflects typical component categories used in automotive, machinery and construction sectors. No additional product lines are indicated beyond the five listed items.

The supplier is classified as an imported tier with a harbor trust level, indicating that it operates through established import channels. While the catalogue does not specify certifications, the listed components correspond to standard industry classifications that often align with ISO 9001 quality management expectations for machining and casting operations. Buyers can expect the listed items to conform to material standards such as ASTM A36 for carbon steel, ASTM A240 for stainless steel flanges, and ISO 6060 for aluminium die‑casting. The plastic box likely follows common polymer grades such as PP or ABS under ISO 1043. The company’s focus remains on delivering these component types without further disclosed services.

Product Range and Specialties of Hebei Yunpeng Machinery Exp.& Imp. Trading Co.Ltd.

The catalogue includes stamping parts, an aluminum die‑casting handle, a forged stainless‑steel flange, pipe fittings and a plastic box. In the machining sector, stamping parts are commonly produced from cold‑rolled steel sheets meeting tensile strengths of 350‑550 MPa, and are often classified under HS chapter 84. Die‑casting handles typically use aluminium alloys such as A380 or A383, offering high fluidity and dimensional stability. Forged stainless‑steel flanges are usually manufactured from grades like 304 or 316, with pressure ratings up to 150 bar for ANSI B16.5 specifications. Pipe fittings may be made from carbon steel or stainless steel, conforming to ASTM A234 for seamless or welded connections. Plastic boxes are generally injection‑molded from polypropylene (PP) or acrylonitrile‑butadiene‑styrene (ABS) with wall thicknesses between 1.5‑3 mm.

Trade and Export Information - Hebei Yunpeng Machinery Exp.& Imp. Trading Co.Ltd.

China is a major exporter of machined components, die‑cast items, flanges and molded plastic parts, supplying markets in Southeast Asia, Europe and North America. Buyers in the automotive, heavy equipment and infrastructure sectors frequently import these goods under Incoterms such as FOB Shanghai or CIF Rotterdam. Typical regulatory requirements include material test reports, dimensional inspection certificates and, where applicable, compliance with REACH for chemical safety in plastic items. Export documentation often references standards like ISO 9001 for quality systems and ISO 14001 for environmental management, which importers may request as part of due diligence. Logistical norms involve packing stamped steel parts in wooden crates, die‑cast handles in bulk pallets, and plastic boxes in cardboard cartons, with container loads ranging from 20‑ft to 40‑ft units.

Sourcing from Hebei Yunpeng Machinery Exp.& Imp. Trading Co.Ltd. - Buyer Guidance

When sourcing stamping parts, request the steel grade certificate, hardness test (Rockwell B 80‑95) and dimensional inspection report to verify tolerance compliance. For the aluminium die‑casting handle, ask for the alloy designation, tensile strength (typically 250‑300 MPa) and a porosity inspection report. The forged stainless‑steel flange should be accompanied by the stainless grade certificate (e.g., 304/316), pressure test results and a surface finish measurement (Ra ≤ 1.6 µm). Pipe fittings require material test reports, pressure rating verification and, if destined for water or gas pipelines, a hydrostatic test certificate. For the plastic box, obtain the polymer grade data sheet, melt flow index (MFI) value and a fire‑retardancy test if required. In all cases, confirm the supplier can provide ISO‑based quality management documentation and that packaging meets the buyer’s freight specifications.

What material grades are used for the stamped parts offered by the supplier?

The stamped parts are typically produced from cold‑rolled carbon steel meeting ASTM A36 or equivalent grades, with tensile strengths in the 350‑550 MPa range.

Can I obtain a material certificate for the aluminum die‑casting handle?

Yes, buyers should request the alloy designation (commonly A380 or A383) together with a tensile strength test report and a porosity inspection.

What standards apply to the forged stainless steel flange?

Flanges are usually manufactured to ASTM A240 specifications, using grades such as 304 or 316 stainless steel, and are tested for pressure ratings up to 150 bar according to ANSI B16.5.

Which documentation is recommended for the pipe fittings?

Importers normally ask for a material test report, a hydrostatic pressure test certificate and compliance with ASTM A234 for the specific fitting type.

What plastic material is used for the plastic box and what tests are typical?

The box is commonly injection‑molded from polypropylene (PP) or ABS; buyers should request the polymer grade data sheet, melt flow index and, if required, a UL94 flammability rating.

What packaging format is used for shipping these components?

Stamped steel parts and flanges are usually packed in wooden crates, die‑cast handles and pipe fittings on palletized wooden frames, while plastic boxes are boxed in cardboard cartons; all are loaded into standard 20‑ft or 40‑ft containers.

Are there any certifications that I should verify before purchasing?

Buyers should verify the supplier’s ISO 9001 quality‑management certification and request specific material test reports and conformity certificates for each product category.

What are the typical lead times for these items?

Lead times vary by product: stamping parts and flanges generally require 2‑4 weeks, die‑casting handles 3‑5 weeks, pipe fittings 2‑3 weeks, and plastic boxes 1‑2 weeks, depending on order size and tooling availability.