About Hebei Huanuojia Bicycle Manufacturing Co., Ltd. - Other Sports Goods and Accessories Supplier in China

Based in China, Hebei Huanuojia Bicycle Manufacturing Co., Ltd. currently lists five active products on the platform. The supplier’s catalogue falls under the categories "Other Sports Goods and Accessories" and "Automobile Gears, Shafts & Clutches". Product titles include the model code Hnj-cb-03, a standard bicycle hub, a baby swing car, a folding bike, and an item labeled simply as B. The listed items span both consumer sports equipment and mechanical components used in automotive applications. No additional product details such as dimensions or materials are supplied in the source data.

The sports‑related items are typically classified under HS Chapter 95 (sporting goods, e.g., code 9506 for bicycles and related accessories), while the mechanical gear items fall under HS Chapter 84 (machinery, e.g., code 8483 for gears and shafts). Buyers of Chinese‑origin sports accessories often encounter CE marking requirements for the European market and ISO 9001 quality management certification from the exporter. Automotive gear components usually require compliance with ISO 26262 functional safety standards and may be inspected under the customs‑administered "General Declaration of Conformity" in major import territories. The supplier’s product count and category placement suggest potential suitability for bulk shipments in 20‑ft or 40‑ft containers.

Product Range and Specialties of Hebei Huanuojia Bicycle Manufacturing Co., Ltd.

The catalogue shows a bicycle hub, a folding bike, and a baby swing car among the five products. In the global bicycle component market, hubs are commonly produced from high‑strength steel or alloy and must meet ISO 4210 specifications for axle diameter, bearing clearance, and weight (typically 300‑600 g for road hubs). Folding bikes are usually built with aluminium or steel frames, with wheel sizes ranging from 16 in to 20 in and a folded length of 70‑100 cm; buyers often request a minimum tensile strength of 500 MPa for the frame tubing.

For baby swing cars, safety standards such as EN 716 (children’s toys) and ASTM F963 in the United States dictate load‑bearing capacity (often ≥ 30 kg) and require testing for tip‑over stability and entrapment hazards. The "Other Sports Goods and Accessories" category also includes generic accessories that may be subject to the IEC 62115 standard for electrical safety if any powered components are present. Although the supplier’s entry for "B" lacks description, items coded with a single letter in similar Chinese export listings are frequently small metal fittings that fall under HS 8302 (other metal goods).

Trade and Export Information - Hebei Huanuojia Bicycle Manufacturing Co., Ltd.

China remains the world’s largest exporter of bicycles, bicycle components, and related sports accessories, with Europe and North America accounting for the majority of inbound shipments. HS Chapter 95 products are typically shipped in cardboard boxes or wooden crates, packed to fill 20‑ft containers (approximately 1,200 kg of bicycles per container) or 40‑ft containers (up to 2,400 kg). Automotive gears and shafts under HS Chapter 84 are often exported in bulk on pallets, protected by anti‑corrosion coating and wrapped in stretch film.

Importers usually require the exporter to provide a commercial invoice, packing list, and a Certificate of Origin, along with any mandatory CE or ISO certifications for the destination market. For shipments to the EU, the REACH regulation may necessitate a chemical safety dossier if the products contain coated metals or plastic components. Common Incoterms used by Chinese manufacturers include FOB Tianjin or Shanghai, with buyers arranging onward freight to regional hubs such as Hamburg, Los Angeles, or Singapore.

Sourcing from Hebei Huanuojia Bicycle Manufacturing Co., Ltd. - Buyer Guidance

When sourcing the bicycle hub or folding bike, request a test report that confirms compliance with ISO 4210 dimensions, material hardness (Rockwell C 45‑55), and weight limits. Samples should be inspected for bearing play, axle alignment, and surface finish (Ra ≤ 0.8 µm) before confirming a bulk order.

For the baby swing car, ask for a copy of the EN 716 conformity assessment, a load‑test certificate, and material safety data sheets for any plastic parts. Verify the supplier’s ability to meet typical minimum order quantities of 500 units for bicycles and 1,000 units for accessories, and confirm lead times of 30‑45 days from order confirmation, allowing extra days for custom packaging or CE marking procedures.

What product codes are listed for this supplier?

The supplier lists five product entries: Hnj-cb-03, Bicycle hub, Baby swing car, Folding bike, and B. Each entry appears as a separate line item in the catalogue.

Which HS chapters are relevant to the listed items?

Bicycle‑related items fall under HS Chapter 95 (code 9506 for sports goods). The automobile gear and shaft items are classified under HS Chapter 84 (code 8483 for mechanical components).

What certifications should a buyer request for the folding bike?

Buyers should request ISO 4210 test results that verify axle and frame dimensions. In addition, a CE Declaration of Conformity and material hardness data for the frame tubing are commonly required for European markets.

What safety standards apply to the baby swing car?

The baby swing car should comply with EN 716 (children’s toys) or ASTM F963, which include a load‑bearing test of at least 30 kg. Tip‑over stability and entrapment hazard assessments are also part of the standard certification process.

What are typical packaging and container options for these products?

Bicycle components are usually packed in cardboard boxes placed on wooden pallets, allowing efficient loading into 20‑ft or 40‑ft containers. Larger gear assemblies are wrapped in stretch film and palletized for the same container sizes.

What documents are commonly required for customs clearance of these goods?

A commercial invoice, packing list, and Certificate of Origin are standard documentation for customs clearance. Depending on the destination, CE or ISO certificates and, for EU imports, a REACH compliance statement may also be required.

What are typical lead times and minimum order quantities?

Lead times reported by Chinese manufacturers for bicycles and accessories range from 30 to 45 days after order confirmation. Minimum order quantities are often set at 500 units for bicycles and 1,000 units for smaller accessories such as hubs or swing cars.