About Handan Hongguan New Material Technology Co. Ltd. - Electrodes Supplier in China

Based in China, Handan Hongguan New Material Technology Co. Ltd. lists five active products under the Electrodes category. All five items fall under HS chapter 85, specifically HS code 8545.11, which covers carbon electrodes used in electric arc furnaces. The catalogue includes Graphite electrode thread, Graphite Electrode nipple, RP Graphite Electrode, HP Graphite Electrode, and UHP Graphite Electrode. Each product is described by its primary material, such as graphite carbon with pitch binder or petroleum needle coke with carbon content of 99 % or higher.

The listed products use graphite carbon or petroleum‑based needle coke as the base material, with carbon purities ranging from 99 % to at least 99.5 %. Fixed carbon specifications are stated as a minimum of 99 % for RP and 99.5 % for UHP electrodes. The HP variant is described as high‑power needle coke graphite, while the RP and standard electrodes reference petroleum coke matrices. These material descriptions align with industry practice for electrodes designed for steel‑making and ferro‑alloy applications.

Product Range and Specialties of Handan Hongguan New Material Technology Co. Ltd.

The supplier’s catalogue concentrates on graphite electrodes in five forms, all classified under HS code 8545.11. The products range from threaded electrode rods to nipple‑type connectors and include standard (RP), high‑power (HP) and ultra‑high‑power (UHP) grades. Typical industry grades for similar Chinese exporters are designated E‑100, E‑150, and E‑200, reflecting the rated current capacity in kilo‑amperes.

Standard specifications for graphite electrodes include a fixed carbon content of 99 % - 99.5 %, ash content below 1 %, density around 1.70 - 1.80 g/cm³, and compressive strength of 350 - 500 MPa depending on grade. Dimensional tolerances are usually ±0.5 mm for diameter and ±5 mm for length, with common diameters from 30 mm to 250 mm. Buyers often require certification to IEC 61853 for performance testing and ISO 9001 for quality management.

Trade and Export Information - Handan Hongguan New Material Technology Co. Ltd.

China is among the world’s largest exporters of graphite electrodes, and shipments under HS code 8545.11 are routinely destined for steel producers in Europe, North America, the Middle East, and Southeast Asia. Importers typically request IEC 61853 test reports, ISO 9001 quality certificates, and material safety data sheets to satisfy plant‑level specifications.

Logistically, electrodes are packed in steel drums or wooden crates, placed on pallets, and shipped in 20‑ft or 40‑ft containers. Common Incoterms are FOB Shanghai or CIF Rotterdam, with freight considerations for the weight of steel drums (approximately 25 kg each) and the need for secure handling to avoid fracture. Chinese export regulations require customs clearance under HS 8545.11 and may involve anti‑dumping duties in certain destination markets.

Sourcing from Handan Hongguan New Material Technology Co. Ltd. - Buyer Guidance

When sourcing graphite electrodes, buyers should request a recent material test report showing fixed carbon, ash, volatile matter, density and compressive strength for the specific grade. Verification of IEC 61853 performance data and ISO 9001 certification helps confirm compliance with steel‑making furnace requirements.

It is advisable to obtain a sample of the exact electrode size and grade before placing a bulk order, and to confirm packaging details such as drum weight, pallet dimensions and moisture protection. Buyers should also clarify the minimum order quantity, typical lead time of 30 - 45 days from order confirmation, and the preferred Incoterm for shipment.

What graphite electrode products are listed by Handan Hongguan New Material Technology Co. Ltd.?

The supplier lists five products: Graphite electrode thread, Graphite Electrode nipple, RP Graphite Electrode, HP Graphite Electrode, and UHP Graphite Electrode, all classified under HS code 8545.11.

What material compositions are specified for these electrodes?

Materials include graphite carbon with a pitch binder, petroleum needle coke graphite with carbon purity of 99 % or higher, and high‑power needle coke graphite for the HP grade. Fixed carbon contents are stated as at least 99 % for RP and 99.5 % for UHP electrodes.

Which HS code applies to the listed products?

All five items are recorded under HS code 8545.11, which covers carbon electrodes used in electric arc furnaces.

What certifications are typically required for graphite electrodes from China?

Buyers usually request IEC 61853 performance certification, ISO 9001 quality‑management certification, and a material safety data sheet. Additional certifications may be required by the importing country’s regulations.

How are graphite electrodes commonly packaged for export?

They are often packed in steel drums or reinforced wooden crates, placed on standard Euro pallets, and loaded into 20‑ft or 40‑ft containers. Packaging includes moisture‑resistant liners to protect against corrosion.

What are typical lead times and minimum order quantities for Chinese graphite electrodes?

Lead times generally range from 30 to 45 days after order confirmation, and minimum order quantities are commonly set at one 20‑ft container, roughly 15 metric tons, but can vary by grade.

How can a buyer obtain product samples or test reports?

Buyers should request a sample of the exact electrode size and grade together with a recent material test report that includes fixed carbon, ash, density and compressive strength. Samples are usually shipped under a paid freight term such as CIF.

Which markets commonly import Chinese graphite electrodes?

European steel mills, North American alloy producers, Middle‑East heavy‑industry complexes, and Southeast Asian steel plants are typical importers of Chinese graphite electrodes classified under HS 8545.11. These regions rely on the high carbon purity and consistent performance of the exported electrodes.