About Foshan Luomei Electric Technik Co., Ltd. - Heaters Supplier in China

Foshan Luomei Electric Technik Co., Ltd. is based in China and currently lists twelve active products across the Agriculture and Heaters categories. The catalogue focuses on air‑moving equipment such as various blowers and a single industrial electric air heater. Products include side channel, vortex and turbine air blowers, as well as high‑pressure, turbo and regenerative models. Additional items are a middle‑pressure centrifugal fan, air knife, ring blower, vortex gas pump, blower air filter and an industrial electric air heater. The product set reflects typical Chinese manufacturers that serve process ventilation, drying and heating applications in industrial settings.

The side channel, vortex and turbine blowers are designed for continuous operation in factories, grain handling facilities and agricultural processing lines. High‑pressure and turbo blowers address applications requiring elevated static pressure, such as boiler feed‑air or pneumatic conveying. The middle‑pressure centrifugal fan and air knife are common in material handling and cleaning processes. The vortex gas pump and blower air filter complement the blower line by providing fluid transfer and filtration functions. The industrial electric air heater is intended for batch or continuous heating of air streams in manufacturing environments.

Product Range and Specialties of Foshan Luomei Electric Technik Co., Ltd.

The supplier’s catalogue covers a spectrum of centrifugal and positive‑displacement blowers, each classified by pressure range and flow capacity. In the industry, low‑pressure blowers typically deliver 0.5 - 2 bar and 5 000 - 30 000 CFM, while high‑pressure models reach 3 - 6 bar and 1 000 - 5 000 CFM. Common construction materials include cast iron, stainless steel and aluminum alloys, with motor ratings from 0.75 kW to 45 kW. Air knives are specified by slit width (1 - 5 mm) and air velocity (10 - 30 m s⁻¹) for efficient drying or cleaning. Industrial electric air heaters are usually rated by output power (10 - 150 kW), surface temperature (up to 500 °C) and include safety features compliant with IEC 60335.

Typical industry standards for these products include ISO 5801 for fans and blowers, IEC 60335 for electric heaters, and IEC 60034 for motor performance. Buyers often look for CE marking or UL certification to verify compliance with safety and electromagnetic compatibility requirements. Efficiency classes such as IE3 for motors and aerodynamic efficiency ratings are also common selection criteria.

Trade and Export Information - Foshan Luomei Electric Technik Co., Ltd.

Chinese manufacturers of blowers and air heaters frequently export to North America, the European Union, the Middle East and Southeast Asian markets. The relevant HS‑code families are 8414 (air or gas compressors, fans and ventilators) for the blower range and 8516 (electric heating elements) for the industrial heater. Importers typically request CE, UL or CSA certificates together with a test report confirming performance curves and noise levels. Shipment is usually packed in wooden crates or steel pallets, with container loading based on unit dimensions; 20‑ft containers hold roughly 10 - 12 tonnes of blower units, while 40‑ft containers can accommodate up to 22 tonnes. Common Incoterms are FOB Foshan port or CIF destination, allowing buyers to arrange inland transport and customs clearance.

The Chinese export framework requires conformity to the national product quality supervision system, and many buyers request a Declaration of Conformity (DoC) aligned with the destination country’s regulations. Freight forwarders often advise on anti‑corrosion coating for steel fans destined for humid climates, and on moisture‑proof packaging for electric heaters to prevent damage during sea transit.

Sourcing from Foshan Luomei Electric Technik Co., Ltd. - Buyer Guidance

When sourcing these blowers, buyers should request the manufacturer’s performance curve showing airflow (CFM) versus static pressure (Pa), motor efficiency class, noise level (dB(A)) and material certification. For the industrial electric air heater, a thermal output rating, surface temperature limit and safety test report (IEC 60335) are standard documents to verify. Buyers are advised to confirm the presence of CE or UL certification, request a sample unit for on‑site testing, and verify motor data sheets for insulation class and duty cycle. Typical minimum order quantities range from a single unit for prototype testing to full container loads for large projects, with lead times of 30 - 45 days after order confirmation.

Prior to finalizing an order, it is prudent to check the supplier’s factory audit report, request a third‑party test report (e.g., SGS or Intertek) and ensure that packaging complies with ISPM 15 standards for wooden pallets if shipping to countries with strict phytosanitary regulations.

What blower types are listed in the supplier’s catalogue?

The catalogue includes side channel, vortex and turbine air blowers, high‑pressure, turbo, regenerative and ring blowers, plus a middle‑pressure centrifugal fan and an air knife.

Which product serves as the heating solution?

The industrial electric air heater is the sole heating product, rated for electric heating of air streams in industrial processes.

What HS codes apply to these products?

Blowers and fans fall under HS code 8414, while the electric air heater is classified under HS code 8516.

What certifications are commonly required for these items?

Buyers typically request CE marking, UL or CSA certification, and a test report confirming compliance with ISO 5801 for fans and IEC 60335 for heaters.

What documentation should a buyer request before purchase?

Performance curves, motor data sheets, safety test reports, material certificates and a Declaration of Conformity are standard documents.

What are typical packaging and shipping methods?

Products are usually packed in wooden crates or steel pallets, loaded into 20‑ft or 40‑ft containers, and shipped under FOB or CIF terms.

What is a realistic lead time for orders?

Lead times generally range from 30 to 45 days after order confirmation, depending on unit size and customization.

Is a sample unit available for testing?

Suppliers of this type normally provide a single unit sample for performance verification before committing to larger orders.