About Fixon Middle East Fze - Packaging Tapes Supplier in United Arab Emirates

Fixon Middle East Fze operates from the United Arab Emirates and currently lists eight distinct product lines in its catalogue. The supplier’s portfolio is grouped under categories such as Packaging Tapes, Industrial Tapes/Films, Kraft Paper, Aluminum Foils and generic Tapes. Products include Guard Film / Scratch Proof Film Tape, Surface Protection Tape, Bopp Adhesive Tape, Double Side Tape, Duct Tape / Purlin Tape and Warning / Caution Tapes. Each item is positioned within the broader HS‑code families for adhesive tapes (typically 3919) and paper‑based products (typically 4805). The company is classified under the “harbor” trust tier in the sourcing platform.

The catalogue also features Aluminium Foil Tape & FSK Rolls, identified with HS code 7607.19 and manufactured from Aluminum Alloy 8011 / 1235 combined with Kraft Paper and Fiberglass Scrim facing. Guard Film is a scratch‑proof polymer film with pressure‑sensitive adhesive, commonly supplied in rolls of 0.5 mm to 1 mm thickness. Surface Protection Tape is typically a low‑tack, polyethylene‑coated tape used for temporary protection of painted surfaces. Bopp Adhesive Tape refers to biaxially oriented polypropylene backing with acrylic or rubber‑based adhesive, widely used in packaging applications. The product set therefore covers both film‑based protective solutions and traditional pressure‑sensitive tapes for industrial and construction use.

Product Range and Specialties of Fixon Middle East Fze

Fixon’s tape line includes pressure‑sensitive adhesives on substrates ranging from polyethylene film to woven fabric. In the industry, packaging tapes are often classified by tensile strength (e.g., 30 - 60 N/15 mm), peel adhesion (150 - 250 g/25 mm), and temperature resistance up to 120 °C for acrylic adhesives. Guard Film / Scratch Proof Film Tape is usually supplied with a hardness of 70 Shore A and a thickness of 0.5 - 1.0 mm, meeting ASTM D‑3330 for abrasion resistance. Double‑sided tapes typically have a total thickness of 0.1 - 0.3 mm and a shear strength of 1.5 MPa, conforming to ASTM D‑3652. Duct tape variants for construction are often reinforced with a fabric mesh and rated for tensile loads of 200 N/15 mm. Kraft paper liners generally follow ISO 536 for basis weight, ranging from 70 g/m² to 120 g/m², and are compatible with standard pressure‑sensitive adhesives.

Aluminium Foil Tape & FSK Rolls are produced from 0.018 - 0.025 mm thick foil, with a backing strength of 150 N/15 mm and a silicone‑based adhesive that retains performance up to 260 °C. The fiberglass scrim facing adds tear resistance, commonly tested to 500 N in ASTM D‑882. These specifications align with typical export specifications for foil‑based sealing tapes used in HVAC, automotive and building envelope applications.

Trade and Export Information - Fixon Middle East Fze

The United Arab Emirates serves as a logistics hub for the Middle East, North Africa and South‑Asia regions, and its tape and foil products are frequently re‑exported to construction, automotive and packaging industries in those markets. Adhesive tapes fall under HS chapter 39 (e.g., 3919 for self‑adhesive tapes) while aluminium foil tape is classified under HS chapter 76, specifically 7607.19 for coated aluminium foil products. Buyers in the Gulf Cooperation Council, East Africa and the Indian sub‑continent typically request ISO 9001 quality‑management certification, as well as product‑specific test reports such as ASTM D‑1974 for adhesive shear and ASTM D‑1000 for tape thickness.

Export shipments from the UAE are commonly packed in 20 ft or 40 ft containers, with rolls protected by inner cardboard cores and outer stretch‑film. Standard Incoterms used include CIF and FOB, with buyers often arranging pre‑shipment inspection (PSI) to verify tensile strength, adhesive peel values and foil thickness against the agreed specifications. Because aluminium foil tape may be subject to anti‑dumping duties in certain jurisdictions, importers usually prepare a certificate of origin and a detailed HS‑code declaration to facilitate customs clearance.

Sourcing from Fixon Middle East Fze - Buyer Guidance

When sourcing from Fixon, request material safety data sheets (MSDS) and laboratory test reports that cover tensile strength, peel adhesion, shear resistance and temperature performance for each tape type. Verify that the aluminium foil tape complies with the specified alloy (Aluminum Alloy 8011 / 1235) and that the FSK facing matches the advertised fiberglass scrim composition. Samples should be evaluated for substrate compatibility, adhesive tack and edge seal integrity before confirming bulk quantities, and buyers should confirm the packaging dimensions (e.g., roll width and core size) to ensure fit with existing handling equipment.

Typical documentation includes a commercial invoice, packing list, certificate of origin, and any applicable third‑party inspection certificates. For high‑value or regulated end‑uses, buyers often ask for compliance with ASTM standards (e.g., D‑3330 for abrasion, D‑3652 for double‑sided tape shear) and may require ISO 9001 or ISO 14001 certification copies, even if the supplier has not listed them explicitly. Aligning these documents with the buyer’s import requirements reduces the risk of shipment delays and non‑conformity findings.

What product categories does Fixon Middle East Fze offer?

Fixon lists eight active products across Packaging Tapes, Industrial Tapes/Films, Kraft Paper, Aluminum Foils and general Tapes, including guard film tape, surface protection tape, BOPP adhesive tape, double‑side tape, duct/purlin tape, warning tapes and aluminium foil tape with FSK rolls.

How can I request a sample of the Guard Film tape?

Contact the supplier through the platform’s messaging system to specify the required roll width, thickness (0.5 - 1.0 mm) and quantity. Request a sample accompanied by an ASTM D‑3330 abrasion‑resistance report to verify performance before placing a larger order.

Which certifications should I verify for aluminium foil tape from the UAE?

Buyers typically request ISO 9001 quality‑management certification, a certificate of origin, and product test reports confirming alloy composition (Aluminum Alloy 8011/1235) and silicone adhesive performance up to 260 °C. Additional compliance with ASTM D‑882 for tear strength is common.

What are the typical packaging dimensions for the duct tape rolls?

Duct or purlin tape is usually supplied on standard 19 mm cores, with roll widths ranging from 48 mm to 108 mm and total lengths between 30 m and 100 m per roll. The outer packaging often consists of a cardboard sleeve or shrink‑wrapped bundle for protection during transport.

Which HS codes apply to the tapes and foils listed by Fixon?

Adhesive and pressure‑sensitive tapes generally fall under HS chapter 39, such as 3919 for self‑adhesive tapes. The aluminium foil tape & FSK rolls are specifically classified under HS code 7607.19 as indicated in the catalogue.

What are common lead times for bulk orders of double‑side tape?

Suppliers in the UAE typically require 2 - 4 weeks for production and quality verification of double‑side tape, followed by 1 week for packaging and dispatch, depending on order volume and required roll dimensions.

What documentation is usually required for customs clearance of aluminium foil tape?

Customs authorities commonly request a commercial invoice, packing list, certificate of origin, and the HS‑code declaration (7607.19). A pre‑shipment inspection report confirming foil thickness and adhesive temperature resistance further facilitates clearance.