About Condor Chemical Di Conforti Giovanni - Car Cleaning & Maintenance Products Supplier in Italy

Condor Chemical Di Conforti Giovanni is based in Italy and currently lists five active products in its catalogue. The company’s portfolio spans the Agriculture, Soaps & Detergents, and Car Cleaning & Maintenance Products categories, with the listed items all belonging to the latter two groups. The catalogue includes Nano Polish, Deter A, Sgrassatore 2, Doppio and Senz’acqua, each identified only by name without additional HS‑code data. The product set reflects typical chemical formulations used for automotive surface treatment, household cleaning and limited agronomic applications. The Italian origin places the supplier within the EU chemical regulatory framework, which governs product composition, labeling and export documentation.

In the listed range, Nano Polish is positioned as a nanometer‑scale polishing aid, Deter A as a general‑purpose detergent, Sgrassatore 2 as a solvent‑based degreaser, Doppio as a dual‑action cleaner and Senz’acqua as a water‑free cleaning concentrate. All products fall under HS chapter 38 for organic chemicals, commonly classified under headings such as 3808 30 for polishing preparations or 3808 90 for other cleaning agents. The catalogue does not specify quantitative parameters, but each product type typically requires data on pH, active ingredient concentration and safety‑data compliance. As an Italian exporter, the supplier must comply with REACH registration and provide EU‑standard labeling for chemical goods.

Product Range and Specialties of Condor Chemical Di Conforti Giovanni

The five items listed by Condor Chemical cover a spectrum of automotive and household cleaning formulations. Nano Polish usually contains silica or alumina nanoparticles sized between 20 nm and 100 nm, delivering a gloss finish on painted surfaces; industry grades are often marketed as “nano‑grade” with particle size control below 50 nm. Deter A is a surfactant‑based detergent; common specifications include anionic or non‑ionic surfactant content of 10‑30 % by weight and a pH range of 7‑9 at 25 °C. Sgrassatore 2, translated as “degreaser 2”, is typically a solvent blend containing petroleum distillates or citrus‑derived terpenes, with flash points above 35 °C and a recommended usage concentration of 0.5‑2 % for metal cleaning. Doppio is marketed as a dual‑action product, often combining a degreaser and a polish in one formula, with typical viscosity of 800‑1200 cP at 25 °C. Senz’acqua is a water‑free concentrate that relies on high‑solvent content; such products are usually packaged in airtight drums to prevent evaporation and are described by a solids content of 30‑40 %.

Across the European cleaning‑chemical market, buyers frequently request compliance with ISO 9001 quality‑management systems, REACH registration numbers and, where applicable, Eco‑Label or EU Ecolabel certifications for biodegradable formulations. Standard test reports include ASTM D4759 for polishing performance, OECD 207 for biodegradability and ASTM E222 for flash point. These specifications help importers compare the listed items against typical industry grades such as “ICUMSA 45” for whiteness in detergents or “ISO 2810” for polishing efficiency.

Trade and Export Information - Condor Chemical Di Conforti Giovanni

Italy is a major exporter of specialty chemicals within the European Union, and products like automotive cleaners and detergents are routinely shipped to Western Europe, the Middle East and North Africa under Incoterms such as FCA or CIP. The HS‑code families relevant to Condor’s catalogue fall under chapter 38 (organic chemicals), especially headings 3808 30 (preparations for polishing) and 3808 90 (other cleaning preparations). Export shipments are commonly packed in 200 L IBCs, 25 kg drums or 1 m³ bulk containers, with labeling that meets UN 3175 for hazardous liquids when solvent content exceeds 10 % by volume. Buyers in the EU, GCC and Sub‑Saharan Africa typically request REACH registration certificates, safety data sheets (SDS) and, where applicable, CE conformity declarations for chemical safety. Italian customs apply the EU’s Combined Nomenclature, so accurate HS coding and proper customs value declaration are essential for smooth clearance.

Sourcing from Condor Chemical Di Conforti Giovanni - Buyer Guidance

When sourcing from Condor Chemical, buyers should first request the latest safety data sheet and a technical data sheet for each product to verify pH, solvent content and recommended dilution ratios. Confirmation of REACH registration numbers and, if available, ISO 9001 certification will indicate that the supplier follows recognized quality‑management practices. It is prudent to ask for a sample analysis report covering particle size distribution for Nano Polish, flash point for Sgrassatore 2 and biodegradability test results for any water‑free concentrate. Typical minimum order quantities for specialty chemicals range from 500 L to 2 000 L per SKU, with lead times of 15‑30 days after order confirmation, depending on production scheduling and export documentation preparation.

Importers should also verify packaging integrity - especially for solvent‑rich products - and ensure that the supplier can provide a full set of export documents, including commercial invoice, packing list, certificate of origin and, where required, a CE‑type conformity assessment for chemical safety.

What HS codes are applicable to Condor Chemical’s product line?

The listed items fall under HS chapter 38 for organic chemicals, most commonly under heading 3808 30 for polishing preparations (Nano Polish) and heading 3808 90 for other cleaning agents such as Deter A, Sgrassatore 2, Doppio and Senz’acqua.

Which certifications should a buyer request before purchase?

Buyers should request the supplier’s REACH registration number, any ISO 9001 quality‑management certificate, and product‑specific test reports such as ASTM D4759 for polishing performance or OECD 207 for biodegradability.

What typical packaging formats are used for these chemicals?

Italian exporters usually ship automotive cleaners and detergents in 200 L IBCs, 25 kg steel drums or bulk 1 m³ containers, with sealed lids and UN 3175 labeling when solvent content exceeds 10 %.

What are common quality parameters for Nano Polish?

Nano Polish is typically evaluated by particle size (20‑100 nm), silica/alumina content (5‑15 % wt.), pH (7‑8), and a gloss‑enhancement test such as ASTM D4759.

How is Sgrassatore 2 classified for transport?

Sgrassatore 2 contains petroleum‑based solvents and is classified as a flammable liquid (UN 3175) with a flash point above 35 °C, requiring appropriate hazard labeling and packaging.

What lead time and MOQ can buyers expect?

Standard lead times are 15‑30 days after order confirmation, with minimum order quantities generally between 500 L and 2 000 L per product, depending on the specific formulation.

Which regions import Italian automotive cleaning chemicals most frequently?

Key import markets include Western European countries, the Gulf Cooperation Council states, and North‑African nations, where demand is driven by automotive after‑sales services and industrial cleaning sectors.

What documentation is required for customs clearance?

Customs typically requires a commercial invoice, packing list, certificate of origin, REACH compliance statement and, where applicable, a CE conformity declaration for chemical safety.