About Component User Industry Co.Ltd. - Computer Cables Supplier in Taiwan

Taiwan‑based Component User Industry Co.Ltd. lists seven active cable products in its catalogue. The supplier groups its offerings under three top categories: Computer Cables, Cable Assemblies, and Telecommunication Cables. All items are classified within the electrical wiring and cable HS families that fall under chapter 85 of the customs tariff. The catalogue includes both data transmission and peripheral connection cables used in IT and telecom equipment. No additional product lines beyond the seven listed are indicated in the supplied data.

The specific items are an ATA 66 cable assembly, a USB cable, a fax modem cable, a CAT5 patch cable, a PS2 mouse cable, a keyboard cable, and a VGA cable. Each product corresponds to a distinct connector type and signal application commonly found in computer and networking hardware. The ATA 66 assembly follows the Parallel ATA standard for legacy storage devices, while the USB cable conforms to the USB 2.0 pinout. The CAT5 patch cable is intended for Ethernet networking and typically meets Category 5 specifications for 100 MHz bandwidth. The VGA cable carries analog video signals and the keyboard, mouse, and fax modem cables serve legacy peripheral interfaces.

Product Range and Specialties of Component User Industry Co.Ltd.

The catalogue covers a set of standard data and peripheral cables. Typical specifications for such cables include copper conductors of 24 AWG or 28 AWG, PVC or LSZH (low smoke zero halogen) jackets, and shielding levels ranging from foil‑shielded to braided‑shielded depending on electromagnetic interference requirements. USB cables are generally offered in USB 2.0 (480 Mbps) or USB 3.0 (5 Gbps) configurations, while CAT5 patch cables are produced to meet IEC 60788 Category 5 performance for 100 MHz transmission. Legacy cables such as ATA 66, PS2 mouse, and VGA usually follow IEC 60794 standards for connector dimensions and impedance, with VGA cables often specified at 75 Ω characteristic impedance.

For cable assemblies, manufacturers frequently provide options for length (e.g., 0.5 m to 5 m), connector plating (gold‑plated contacts for corrosion resistance), and optional strain relief. Buyers often request compliance with RoHS (Restriction of Hazardous Substances) and IEC 60950‑1 safety standards, especially when the cables are destined for the European or North American markets.

Trade and Export Information - Component User Industry Co.Ltd.

Taiwan is a major exporter of electronic interconnects, and its cable manufacturers typically ship to North America, Europe, and Southeast Asian OEMs. The products fall under HS chapter 85, with common sub‑headings such as 8544.70 for insulated flexible cords and 8544.42 for data transmission cables. Importers usually require CE marking for the European Union, UL certification for the United States, and RoHS compliance for both regions. Export shipments are commonly packed in cardboard boxes or recyclable reels, sized to fit standard 20‑foot or 40‑foot containers, and shipped FOB from ports such as Kaohsiung or Taichung.

Regulatory checks often involve pre‑shipment inspection reports confirming material composition, fire resistance, and electrical performance. Buyers frequently ask for a test report against IEC 61156 (for Ethernet cables) or IEC 61935 (for USB cables) to satisfy customs and quality audits. The logistics chain for these low‑weight, high‑volume items usually follows CIF or DAP terms, with moisture‑absorbing desiccants used to protect the cables during sea transit.

Sourcing from Component User Industry Co.Ltd. - Buyer Guidance

When sourcing these cables, request a product data sheet that details conductor gauge, jacket material, shielding type, and connector plating. Ask for test certificates such as IEC 60788 for CAT5 performance, IEC 61935 for USB compliance, and any RoHS or CE declarations relevant to the destination market. Verify that the supplier can provide a sample batch that matches the specified length and connector configuration before placing a larger order.

Confirm the packaging format - whether the cables are supplied on reels, in bulk cartons, or individually wrapped - as this impacts handling and freight planning. Typical minimum order quantities for custom lengths range from 500 meters to 5,000 meters, with lead times of 2‑4 weeks for standard specifications and up to 6 weeks for specialized shielding or plating. Ensure that the supplier can furnish a pre‑shipment inspection report and that the HS codes declared match the product description to avoid customs delays.

What types of cables does Component User Industry Co.Ltd. list in its catalogue?

The supplier lists seven cable types: ATA 66 cable assembly, USB cable, fax modem cable, CAT5 patch cable, PS2 mouse cable, keyboard cable, and VGA cable.

Which HS code chapters are relevant for these cable products?

All listed cables fall under chapter 85 of the customs tariff, specifically sub‑headings such as 8544.70 for insulated flexible cords and 8544.42 for data transmission cables.

What standard specifications should I check for the CAT5 patch cable?

Buyers typically verify that the CAT5 cable meets IEC 60788 Category 5 performance, 100 MHz bandwidth, 24 AWG copper conductors, and a 100 Ω characteristic impedance.

Are certifications like CE or UL required for these cables?

For exports to Europe, CE marking is commonly required; for the United States, UL certification is standard. RoHS compliance is also generally expected for both markets.

What documentation is advisable to request before ordering?

Request a product data sheet, IEC test reports (e.g., IEC 60788 for Ethernet, IEC 61935 for USB), and compliance certificates for RoHS, CE, or UL as applicable to the target market.

What are typical packaging and shipping formats for these cables?

Cables are usually packed in cardboard boxes or on recyclable reels, sized for 20‑foot or 40‑foot containers. Moisture‑absorbing desiccants are often included to protect the insulation during sea freight.

What minimum order quantities and lead times can I expect?

Standard lengths often have MOQ ranges from 500 meters to 5,000 meters. Lead times are typically 2‑4 weeks for off‑the‑shelf specifications and up to 6 weeks for custom shielding or connector variations.