About Chemsol Korea - Adhesive, Sealants & Lubricants Supplier in

Chemsol Korea lists five active products in its catalogue. The portfolio is grouped under the broader categories of Adhesive, Sealants & Lubricants, Agriculture, and Glues & Adhesives. The listed items are S-13, CX-8600, DX-920, CE-1170 and CE-2290. Two of the items carry HS classifications: S-13 is recorded under HS code 3814.00 (organic composite solvent blends) and CE-1170 under HS code 3215.19 (solvent‑based acrylic polymer coatings).

S-13 is described as an organic composite solvent blend formulated proprietary. CE-1170 is a solvent‑based acrylic polymer coating intended for surface treatment. The remaining three products (CX-8600, DX-920, CE-2290) are named without material or HS‑code details in the supplied data.

Product Range and Specialties of Chemsol Korea

The catalogue covers a solvent blend (S-13), a solvent‑based acrylic coating (CE-1170) and three additional adhesive‑related formulations (CX‑8600, DX‑920, CE‑2290). In the adhesive and sealant market, solvent blends are typically evaluated by flash point, VOC content and solvency power, while acrylic polymer coatings are measured by solid content (often 30‑45 % by weight), gloss level, and cure temperature. Common grades for such products include low‑odor, high‑solvent‑evaporation rates for fast drying, and UV‑stable acrylics for exterior applications. Buyers in the sector frequently request compliance with REACH registration, ISO 9001 quality management, and ASTM D823 for coating film thickness.

Trade and Export Information - Chemsol Korea

Exporters of adhesive chemicals from the Korean peninsula usually serve automotive OEMs, construction material manufacturers, and electronics assemblers in East Asia, the Middle East and Europe. HS chapter 38.14 products such as S-13 are subject to customs controls on hazardous chemicals and often require a safety data sheet and a declaration of compliance with the Globally Harmonized System (GHS). HS chapter 32.15 coatings like CE-1170 are shipped in 200 L drums or 20 ft containers, with standard packaging of sealed metal drums to meet UN 1979 classification for flammable liquids. Typical certifications requested by importers include REACH registration, ISO 14001 environmental management, and, where applicable, UL or IEC standards for coating performance.

Sourcing from Chemsol Korea - Buyer Guidance

When sourcing from Chemsol Korea, buyers should request a current Material Safety Data Sheet (MSDS) for each product, as well as any available test reports on viscosity, solvent retention and VOC limits. For the acrylic coating, a certificate of conformity to ISO 9001 and a performance report covering gloss, adhesion (ASTM D3359) and weathering resistance (ASTM D4587) is standard practice. Verification of HS‑code declaration and proper labeling for hazardous goods should be confirmed before loading. Samples are typically provided in 1‑L or 5‑L quantities to allow laboratory testing of cure time and substrate compatibility.

What HS codes are associated with Chemsol Korea’s products?

S-13 is listed under HS code 3814.00 (organic composite solvent blends) and CE-1170 under HS code 3215.19 (solvent‑based acrylic polymer coatings). The other three items have no HS code disclosed in the catalogue.

Which certifications should a buyer request for the acrylic coating CE-1170?

Buyers normally request an ISO 9001 certificate, REACH registration proof, and performance test reports such as ASTM D823 for film thickness and ASTM D3359 for adhesion.

What typical packaging is used for the solvent blend S-13?

Solvent blends in this HS category are commonly packed in 200 L steel drums or 20 ft containers with inner polyethylene liners to meet UN 1979 hazardous material packaging standards.

Are material safety data sheets (MSDS) available for all products?

An MSDS is standard for chemical products; buyers should ask Chemsol Korea to provide the latest MSDS for each of the five listed items before shipment.

What are the usual lead times for a first order of CE-1170?

First‑time orders of solvent‑based acrylic coatings typically require 4‑6 weeks for production, quality verification and packaging, assuming the buyer provides the required specifications and test requirements.

Which markets commonly import Korean adhesive and sealant products?

Key import markets include automotive manufacturers in Japan and Southeast Asia, construction material firms in the Middle East, and electronics assemblers in the United States and Europe, all of which often require compliance with REACH and ISO standards.