About Changzhou Wugan Drying Equipment Co., Ltd - Grinding Wheel Supplier in China

Changzhou Wugan Drying Equipment Co., Ltd is based in China and currently lists five active products in its catalogue. The company’s catalogue includes the CT‑CA unit, a fluid‑bed granulator, an LDP fluid‑bed coater, a PGL‑B spraying dryer granulator and a QZL pelletizer. These items are grouped under the supplier’s top categories of grinding wheel, tools & instruments and microwave ovens as recorded in the source data. No HS codes are provided for the individual products in the supplied information.

The five listed machines address processing steps such as drying, granulation, coating and pelletising that are common in bulk‑material industries. While the catalogue does not give capacity or material details, the product names indicate a focus on fluid‑bed and spray‑drying technology, which are widely used in pharmaceutical, food and chemical sectors. The supplier is classified under the “harbor” trust tier in the source data.

Product Range and Specialties of Changzhou Wugan Drying Equipment Co., Ltd

The catalogue shows a fluid‑bed granulator and a fluid‑bed coater, both of which typically operate with temperature controls between 30 °C and 200 °C and batch capacities ranging from 0.5 t to 5 t per cycle. Spray‑dryer granulators such as the PGL‑B model commonly handle feed rates of 0.2‑2 t/h and use atomising nozzles to produce fine particles. Pelletisers like the QZL unit are usually equipped with rotating drums or extrusion dies and can produce pellets sized from 2 mm to 10 mm. Grinding‑wheel related tools listed under the top categories are generally manufactured in grades such as CBN or ceramic, with grit sizes from 30 to 1200, although the catalogue does not specify individual grades. Microwave ovens, when listed as industrial equipment, often comply with IEC 60335‑2‑16 and deliver power outputs between 1 kW and 10 kW for batch processing.

Trade and Export Information - Changzhou Wugan Drying Equipment Co., Ltd

China is a leading exporter of industrial drying and granulation equipment, and products such as fluid‑bed granulators, spray dryers and pelletisers are commonly classified under HS Chapter 84 (e.g., 8422 for drying machines, 8479 for other machinery). Buyers from Southeast Asia, the European Union and North America regularly import these machines for use in pharmaceutical, food‑processing and specialty‑chemical plants. Typical export documentation includes a commercial invoice, packing list, Bill of Lading and, where required, CE Declaration of Conformity or ISO‑9001 certification evidence. Containers of this size of equipment are often shipped in 20‑ft or 40‑ft dry containers with wooden crating, and CIF or FOB terms are standard in the sector.

Buyers sourcing from Chinese equipment manufacturers usually request test reports confirming temperature uniformity, power consumption and material compatibility (e.g., stainless‑steel 304/316 construction). Verification of CE marking, ISO‑9001 quality‑management certification and, for pharmaceutical‑grade machines, compliance with GMP guidelines is standard practice. Importers should also confirm that the equipment meets relevant regional standards such as EU Machinery Directive 2006/42/EC or US FDA 21 CFR 11 if the machines will be used for regulated products.

Sourcing from Changzhou Wugan Drying Equipment Co., Ltd - Buyer Guidance

When evaluating Changzhou Wugan’s offerings, buyers should ask for detailed specification sheets that list design capacity, temperature range, power rating, material of construction and control system type (e.g., PLC or analog). Requesting CE Declaration of Conformity or ISO‑9001 certificates will help confirm the supplier’s compliance with common international quality standards. It is advisable to obtain a sample performance report or a reference project list to verify that the fluid‑bed or spray‑drying units meet the required particle‑size distribution and moisture‑content specifications for the intended application.

Typical minimum order quantities for industrial drying and granulation equipment are one unit per model, with lead times ranging from 30 to 90 days depending on customization and current production load. Buyers should confirm packaging dimensions, weight and whether the supplier offers on‑site installation, training and after‑sales service, as these factors affect logistics planning and total landed cost.

What products are listed in Changzhou Wugan Drying Equipment Co., Ltd’s catalogue?

The catalogue lists five items: CT‑CA, a fluid‑bed granulator, an LDP fluid‑bed coater, a PGL‑B spraying dryer granulator and a QZL pelletizer.

Which industry sectors commonly use the types of equipment Changzhou Wugan offers?

Fluid‑bed granulators, spray‑dryer granulators and pelletisers are widely used in pharmaceutical formulation, food‑ingredient processing and specialty chemical production.

What HS code families are typically applied to the equipment in this catalogue?

Such equipment is usually classified under HS Chapter 84, for example 8422 for drying machines and 8479 for other machinery and parts.

Which certifications should a buyer request for these machines?

Buyers should request CE Declaration of Conformity, ISO‑9001 quality‑management certification, and, for pharmaceutical applications, evidence of GMP compliance.

What are common specifications buyers verify for fluid‑bed granulators?

Typical specifications include batch capacity (0.5‑5 t), operating temperature range (30‑200 °C), power consumption (up to 30 kW) and construction material (stainless‑steel 304/316).

Is a sample or test report available before placing an order?

Suppliers generally provide a performance test report or a reference case study that shows temperature uniformity, moisture‑removal efficiency and particle‑size distribution for the equipment.

What packaging and shipping methods are standard for this type of equipment?

Units are normally crated in wooden frames, placed inside 20‑ft or 40‑ft dry containers, and shipped under CIF or FOB terms.

What is the typical lead time and minimum order quantity?

The usual minimum order is one unit per model, with lead times of 30‑90 days depending on customization and current production schedules.