About Cenky High Security Fencing Co. - Army & Police Equipment Supplier in China

Cenky High Security Fencing Co. is based in China and currently lists five distinct security‑fencing products. The catalogue includes a 358 high security welded mesh fencing (2‑D), a 3510 high security welded mesh fence designed for prison use, a palisade security wire fence, a roll‑top safety fence intended for schools, and a Paladin striped welded mesh fence. All items fall under the broader Army & Police Equipment category, reflecting the supplier’s focus on high‑security applications. Each product is described by its model name rather than a generic label, indicating a targeted product line for institutional and correctional facilities.

The five products are all variations of welded‑mesh or wire‑type fencing, differing mainly in mesh configuration, height, and intended installation environment. The roll‑top fence is marketed for educational campuses, while the Paladin and palisade models emphasize visibility and deterrence. The prison‑specific 3510 model suggests compliance with stricter security standards, and the 358 model is positioned as a generic high‑security solution. The catalogue does not provide HS‑code numbers, so classification would rely on standard wire‑mesh headings used for security fencing.

Product Range and Specialties of Cenky High Security Fencing Co.

Cenky’s catalogue covers welded‑mesh and wire‑type fencing that is typical for high‑security installations. In the industry, such fences are usually fabricated from hot‑dip galvanized steel (often grade Q235 or SS400) with mesh openings ranging from 30 mm to 100 mm and a wire gauge of 2.0 mm to 3.0 mm. Standard surface treatments include zinc coating of 275 g/m² or a powder‑coat finish to meet corrosion‑resistance requirements for outdoor deployment. Buyers often request compliance with EN 13374 (prison and correctional facility fencing) or ISO 9001‑based quality management documentation. Typical product specifications also list tensile strength of 400 MPa, a maximum load capacity of 150 kg m⁻¹, and a minimum pole spacing of 2.5 m.

Trade and Export Information - Cenky High Security Fencing Co.

China is a major exporter of security‑fencing systems, supplying markets in the Middle East, Africa, Southeast Asia and parts of Europe. Export shipments are normally packed in 20‑ft or 40‑ft containers, with a 20‑ft container capable of holding approximately 1,200 m of welded‑mesh panels when coiled or folded. Buyers frequently require certifications such as CE marking, ISO 9001, and test reports confirming compliance with local building codes or prison standards. Importers often request a pre‑shipment inspection under the Ministry of Commerce (MOFCOM) or a third‑party inspection agency to verify material grade, coating thickness and dimensional tolerances. Common Incoterms used for these goods are FOB Shanghai or CIF destination port, depending on the buyer’s logistics preferences.

Sourcing from Cenky High Security Fencing Co. - Buyer Guidance

When sourcing from Cenky, purchasers should request a detailed product data sheet that lists steel grade, mesh size, wire gauge, coating type, tensile strength and any relevant standard certifications. A third‑party test report (e.g., SGS or Bureau Veritas) confirming corrosion resistance and mechanical performance is advisable before confirming a purchase. Typical minimum order quantities for welded‑mesh fencing run from 500 m to 1,000 m, with lead times of 30‑45 days after order confirmation, subject to production scheduling and export documentation. Buyers should also verify that the supplier can provide CE or EN compliance certificates if the destination market mandates them, and arrange for a pre‑shipment inspection to validate the agreed specifications.

What material is used for Cenky’s high‑security welded mesh fencing?

The fences are fabricated from hot‑dip galvanized steel, commonly grade Q235 or SS400, which provides the required tensile strength and corrosion resistance for outdoor security applications.

Which standards are typically applicable to prison‑grade fencing?

Prison‑grade fencing usually conforms to EN 13374, which specifies mesh opening, height, tensile strength and anti‑climb features. Buyers should request a compliance certificate for this standard.

What are the typical mesh dimensions and wire gauge for the listed products?

Mesh openings generally range from 30 mm to 100 mm, with a wire gauge between 2.0 mm and 3.0 mm. Specific dimensions are provided in the product data sheet for each model.

Can I obtain a sample before placing a full order?

Suppliers of security fencing commonly provide a sample length (e.g., 5 m) for testing. Request a sample together with the material test report to verify coating thickness and tensile strength.

What certifications should I ask for when importing these fences?

Typical certifications include ISO 9001 quality management, CE marking for European markets, and any local compliance certificates such as EN 13374 for correctional facilities. Request copies of these documents before finalizing the contract.

What is the usual minimum order quantity and lead time?

Minimum order quantities generally start at 500 m of fencing, with lead times of 30‑45 days from order receipt, depending on production scheduling and export clearance.

How are the fences packaged for shipment?

Fencing panels are usually coiled or bundled and placed in wooden crates or secured on pallets within a 20‑ft or 40‑ft container. Packaging is designed to protect the coating from damage during transit.

Which Incoterms are commonly used for these exports?

Exporters from China typically offer FOB Shanghai or CIF to the buyer’s destination port. The chosen Incoterm determines responsibility for freight, insurance and customs clearance.