About Beyondchy International Co., Limited - Fireplaces Supplier in China

Based in China, Beyondchy International Co., Limited lists ten active products in its current catalogue. The product set spans textile accessories and hardware, including lace items, velvet fabric, buttons, beads, badges, elastic components and other garment accessories. The only HS code provided in the catalogue is 9606.29 for the mixed‑material button, which falls under HS Chapter 96 for articles of plastic or other materials. The remaining items are typically classified under HS Chapter 58 for woven fabrics and HS Chapter 63 for other made‑up articles, consistent with standard customs coding.

The button entry notes material options of plastic, metal or corozo, reflecting the common material mix used in decorative and functional fasteners. Lace products such as Lycra lace and polyester lace are usually supplied in rolls measured by width (30 mm to 150 mm) and weight (30 g/m² to 80 g/m²). Velvet fabric is commonly described by its GSM, with commercial grades ranging from 250 gsm to 400 gsm. Metal badges and hand‑work beads are typically sized in millimetres and may receive surface plating for corrosion resistance. No specific certifications are listed, so buyers should request standard compliance documents.

Product Range and Specialties of Beyondchy International Co., Limited

Beyondchy’s catalogue lists specific product types: Lycra lace, polyester lace, neck lace, garment accessories, velvet fabric, mixed‑material button (HS 9606.29), metal badges, hand‑work beads, elastic strips and a product named Bettern. In the lace segment, industry standards such as ISO 105‑A02 for colour fastness and ASTM D5035 for tensile strength are commonly applied, with stretch percentages for Lycra‑based lace typically between 30 % and 50 %. Velvet fabrics are evaluated by GSM, pile height (2 mm‑5 mm) and fibre composition, with cotton‑blend grades often targeting a 250‑400 gsm range.

Buttons classified under HS 9606.29 are produced in sizes from 5 mm to 30 mm diameter, with material specifications including ABS plastic, zinc alloy, or natural corozo, each requiring compliance with REACH for hazardous substances. Metal badges and beads are usually stamped or cast, and buyers often request certifications such as ISO 9001 for quality management and Oeko‑Tex Standard 100 for textile safety. Elastic components are supplied in strip widths of 5 mm‑25 mm and elongation rates of 300 %‑500 % under standard load testing.

Trade and Export Information - Beyondchy International Co., Limited

China is a leading exporter of textile accessories and fasteners, supplying North America, Europe and Southeast Asia with bulk shipments in 20‑foot or 40‑foot containers. Products such as lace, velvet fabric and buttons fall under HS Chapters 58, 63 and 96, which are subject to routine customs inspection for material composition and safety compliance. Importers typically require certificates of conformity, REACH registration for chemical safety, and test reports for colour fastness, tensile strength and dimensional stability.

Buyers of Chinese textile accessories often use Incoterms CIF or FOB, with packaging in sealed poly‑bags, cardboard cartons or bulk rolls depending on the item. For buttons and metal badges, anti‑corrosion coating and moisture‑proof packaging are standard to preserve finish during sea transit. Export logistics from Chinese ports such as Shanghai, Shenzhen or Ningbo support rapid turnaround, and Chinese exporters commonly provide pre‑shipment inspection reports from SGS or Bureau Veritas.

Sourcing from Beyondchy International Co., Limited - Buyer Guidance

Sourcing from Beyondchy should start with a request for detailed material data sheets, including fibre content for lace, GSM and fibre blend for velvet, and exact material composition for buttons and badges. Buyers are advised to obtain test reports for colour fastness (ISO 105), tensile strength (ASTM D5035) and, where applicable, REACH compliance certificates before confirming an order.

Typical minimum order quantities in the Chinese market range from 500 meters for lace rolls to 1,000 pieces for buttons and badges, with lead times of 15‑30 days after sample approval. Samples should be requested in the final intended size and finish, and packaging specifications (e.g., poly‑bag weight, carton dimensions) should be confirmed to avoid freight discrepancies.

What product categories does Beyondchy list?

The catalogue includes Lycra lace, polyester lace, neck lace, garment accessories, velvet fabric, mixed‑material buttons (HS 9606.29), metal badges, hand‑work beads, elastic strips and a product named Bettern. These items cover both textile accessories and hardware components used in apparel and décor.

Which HS code is associated with the button product?

The button is recorded with HS code 9606.29, which belongs to Chapter 96 covering articles of plastic or other materials. This code is used globally for customs classification of mixed‑material fasteners.

What material options are available for the button?

According to the catalogue, the button may be made from plastic (such as ABS), metal alloys like zinc, or natural corozo. The material choice influences weight, durability and compliance with REACH regulations.

What standard tests are typically required for lace products?

Buyers usually request ISO 105 colour‑fastness results and ASTM D5035 tensile strength measurements for lace. For Lycra‑based lace, stretch performance of 30‑50 % is a common specification.

What specifications are important for velvet fabric?

Velvet fabric is commonly evaluated by its GSM (250‑400 gsm), pile height (2‑5 mm) and fibre blend. Test reports often include abrasion resistance and dimensional stability to ensure suitability for upholstery or apparel.

What certifications should a buyer ask for when importing these items from China?

Typical certifications include REACH registration for chemical safety, ISO 9001 quality‑management certification, and Oeko‑Tex Standard 100 for textile safety. Requesting these documents helps verify compliance with international standards.

What are typical packaging and shipping methods for these products?

Lace and fabric are usually packed in sealed poly‑bags inside cardboard cartons, while buttons, badges and beads are packed in bulk bags or cartons with anti‑corrosion coating. Shipments are commonly sent in 20‑foot or 40‑foot containers under FOB or CIF terms.