About Asia Kingtop Enterprise Ltd. - Plastic Raw Materials Supplier in Mexico

Mexico‑based Asia Kingtop Enterprise Ltd. lists five active products in its catalogue, covering both plastic raw materials and a glass scrap item. The supplier’s catalogue includes a scrap grade described as “Pc Lens Shaving (Glasses) - Scrap”, a mixed‑plastic line covering PC, POM (Acetal), ABS, HDPE, PP and Nylon, two regrind grades of PA66 with 30‑35 % glass fiber and PA6/PA66 with 10‑30 % glass fiber, and a separate entry for PEEK granules. Each entry corresponds to a distinct material family that is commonly traded under HS chapter 39 for plastics and HS chapter 70 for glass products. The information provided does not mention any certifications, so no specific compliance claims are made.

The product list reflects a focus on engineering polymers and a secondary glass material suitable for downstream recycling. The PA66 and PA6 regrind grades indicate the presence of glass‑filled engineering resins, while the PEEK granules represent a high‑performance thermoplastic used in demanding applications. No medical mask items appear in the detailed catalogue, despite the broader category tag, and no HS codes are supplied for the individual entries.

Product Range and Specialties of Asia Kingtop Enterprise Ltd.

The catalogue covers a range of engineering plastics: polycarbonate (PC), polyoxymethylene (POM/Acetal), acrylonitrile‑butadiene‑styrene (ABS), high‑density polyethylene (HDPE), polypropylene (PP), and various nylon grades. Typical industrial grades for these polymers fall within melt flow index (MFI) ranges of 2‑15 g/10 min for PC, 5‑30 g/10 min for POM, and 0.5‑5 g/10 min for HDPE, with density specifications of 1.20‑1.22 g/cm³ for HDPE and 0.91‑0.94 g/cm³ for PP. The regrind products specify glass‑fiber reinforcement levels of 10‑35 % by weight, which aligns with common engineering grades such as PA6 GF30 and PA66 GF35 used for automotive and electrical components. PEEK granules are supplied as high‑temperature resistant resin, typically meeting ASTM D638 tensile strength of 90‑120 MPa and a melt temperature around 340 °C.

The glass scrap entry, “Pc Lens Shaving (Glasses) - Scrap”, is a secondary raw material used in glass recycling streams. In the industry, such scrap is usually classified under HS 70.22 (glass of a kind used for tableware, laboratory or industrial use) and is graded by purity, particle size (often <5 mm) and moisture content below 0.5 %. Buyers typically request a material analysis report confirming silica content and the absence of hazardous contaminants.

Trade and Export Information - Asia Kingtop Enterprise Ltd.

Mexico is a notable exporter of polymer granules and regrind, with most shipments destined for the United States, Canada, the European Union and intra‑American markets. Plastic raw materials fall under HS chapter 39, while glass scrap is classified in HS chapter 70, and both categories are subject to customs inspections for moisture, contamination and correct tariff coding. Common buyer requirements include ISO 9001 quality management certification, REACH registration for European imports, and, where applicable, FDA compliance for products entering the medical supply chain. Export logistics usually involve 20‑ft or 40‑ft containers packed in bulk bags or polypropylene liners, with FOB terms from Mexican ports such as Veracruz or Altamira being standard practice.

Sourcing from Asia Kingtop Enterprise Ltd. - Buyer Guidance

When sourcing from Asia Kingtop Enterprise Ltd., buyers should request a full material data sheet that includes melt flow index (ASTM D1238), tensile strength (ASTM D638), density, moisture content and, for regrind, the exact glass‑fiber loading verified by spectroscopy. Test reports confirming compliance with REACH or FDA (for any medical‑related downstream use) should be obtained before finalizing the order. Verification of packaging integrity - such as heat‑sealed polypropylene bags for granules or bulk container moisture monitoring for glass scrap - helps ensure product quality during transit.

What types of plastic materials does Asia Kingtop Enterprise Ltd. offer?

The catalogue lists polycarbonate (PC), polyoxymethylene (POM/Acetal), ABS, HDPE, PP, Nylon, PA6, PA66 and their glass‑filled regrind variants, as well as PEEK granules. Each material is supplied in standard industrial granule or regrind form suitable for extrusion or injection molding.

Are the regrind grades certified for specific glass‑fiber content?

The regrind products specify glass‑fiber reinforcement of 10 % to 35 % by weight (PA6/PA66 GF10‑30 % and PA66 GF30‑35 %). Buyers should request a material test report confirming the exact fiber loading and particle size distribution.

What documentation should a buyer request for the plastic granules?

Typical documents include a Material Safety Data Sheet (MSDS), a test report following ASTM D1238 for melt flow index, ASTM D638 for tensile properties, and a compliance statement for REACH or FDA if the end use is regulated.

How is the glass scrap material supplied?

The product “PC Lens Shaving (Glasses) - Scrap” is supplied as bulk glass fragments suitable for recycling into new glass containers or fiberglass. Buyers usually receive the material in 20‑ft containers or bulk bags with a moisture content below 0.5 %.

What are the typical packaging options for the granules and regrind?

Granules and regrind are commonly packed in 1‑ton polypropylene bags, 25 kg multi‑wall paper bags, or bulk shipped in 20‑ft or 40‑ft containers. Sealing is done with heat‑sealed liners to protect against moisture ingress.

Which international standards are relevant for these products?

Plastic engineering resins generally conform to ISO 9001 quality management, ASTM specifications for mechanical properties, and REACH registration for the European market. PEEK granules often meet ASTM D638 tensile requirements and IEC 60695 fire‑resistance criteria when required.

What are typical minimum order quantities (MOQ) and lead times?

MOQs vary by material: standard granules often start at 5 tons, regrind at 2 tons, and specialty PEEK at 1 ton. Lead times reported by the supplier range from 15 days for stocked items to 30‑45 days for custom‑blended grades.

Which markets does Asia Kingtop Enterprise Ltd. primarily export to?

While the supplier’s target markets are not listed, Mexican exporters of plastic raw materials commonly serve the United States, Canada, the European Union and intra‑American markets. Buyers should confirm the Incoterm (e.g., FOB Mexico Port) and any required export licenses.