About Altantic Air Filters - Industrial Filters Supplier in Ireland

Altantic Air Filters is based in Ireland and currently lists five active products in its catalogue. The company classifies its offerings under the industrial filters and air filters categories, which are commonly recorded under HS chapter 84, heading 8421 for air‑conditioning and filtration units. The product portfolio includes a mix of pocket, cell, panel and rigid filter designs that serve ventilation, HVAC and process‑industry applications. Each listed item aligns with standard filter media classifications used in European and North American markets, such as G‑class (coarse) and ePM efficiency grades.

The five products - Eco Pocket Filters, Eco Cell Filters, Activated Carbon Panel Filter, Eco V Rigid Filter and G4 Panel Filters - represent typical filter formats found in industrial air handling systems. Pocket and cell filters are generally supplied in dimensions ranging from 300 mm × 300 mm up to 1200 mm × 2400 mm, with media thicknesses between 15 mm and 30 mm. Panel filters, including the G4 variant, are often fabricated from glass‑fiber or synthetic fibers and are sized to fit standard frame widths of 600 mm, 800 mm or 1200 mm. The activated carbon panel adds adsorption capacity for volatile organic compounds, a feature frequently required in clean‑room and laboratory environments.

Product Range and Specialties of Altantic Air Filters

Altantic Air Filters' catalogue contains Eco Pocket Filters, Eco Cell Filters, an Activated Carbon Panel Filter, Eco V Rigid Filter and G4 Panel Filters. Pocket filters typically use pleated synthetic media with a nominal efficiency of MERV 8‑11, while cell filters employ a modular block structure that can achieve ISO 16890 ePM1 efficiencies of 40‑55 %. The G4 Panel Filter corresponds to the EN 779 G4 grade, indicating a coarse filtration level with a dust holding capacity of around 100 g/m³. The Eco V Rigid Filter is a rigid frame design often used where high airflow resistance and structural stability are required, such as in dust‑laden industrial ducts. The Activated Carbon Panel Filter incorporates a layer of granular activated carbon (typically 30‑50 % by weight) for gas adsorption alongside a particulate filtration media.

In the broader air‑filter market, buyers encounter standard specifications such as pressure drop (Pa), airflow rating (m³/h), and filtration efficiency expressed by MERV or ISO 16890 categories. Common material options include glass‑fiber, polyester, polypropylene and activated carbon blends. Dimensions are usually supplied in millimetres, and packaging often involves cardboard boxes or reusable frames for bulk shipments. These industry norms help buyers compare Altantic Air Filters' products with other suppliers operating under the same HS code 8421.

Trade and Export Information - Altantic Air Filters

Ireland exports air‑filtration products primarily to the EU, the United Kingdom and North America, where HVAC and industrial ventilation sectors maintain steady demand. Under HS heading 8421, filters are subject to customs procedures that may require a CE Declaration of Conformity for the European market and compliance with UL or FM standards for North American buyers. Typical certifications sought by importers include EN 779 (now superseded by ISO 16890), ISO 9001 quality management and, where applicable, HEPA or ULPA ratings for high‑efficiency applications.

Logistically, air filters are commonly shipped in 20‑ft or 40‑ft containers on pallets, with each pallet holding between 20 and 40 panel units depending on size and packaging. Moisture protection is achieved through sealed cardboard or plastic wrap, and buyers often request a pre‑shipment inspection report covering dimensions, weight and visual defect checks. Incoterms such as FOB Dublin Port or CIF for destination ports are standard in this trade segment.

Sourcing from Altantic Air Filters - Buyer Guidance

When sourcing from Altantic Air Filters, buyers should request the latest CE Declaration of Conformity and any ISO 9001 audit reports to verify manufacturing controls. For performance verification, request test data that includes pressure drop (Pa) at the rated airflow, filtration efficiency (MERV or ISO 16890) and, for the activated carbon panel, adsorption breakthrough curves for target VOCs.

Buyers are advised to confirm the exact dimensions, media thickness and frame material before placing an order, as these affect palletization and container loading. Minimum order quantities for panel filters typically start at one full pallet (approximately 20‑30 units), with lead times ranging from 4 to 8 weeks after sample approval. Requesting a pre‑shipment sample and an independent third‑party test report can reduce risk of non‑conformity.

What filter standards apply to Altantic Air Filters' products?

The products fall under EN 779 (now ISO 16890) for air‑filter efficiency, with the G4 Panel Filter classified as a coarse G‑grade. Buyers should verify CE marking and request ISO 9001 certification evidence.

Which HS code is used for these air filters?

Air‑filtration units like pocket, panel and rigid filters are generally classified under HS heading 8421, which covers air‑conditioning and filtration equipment.

What typical dimensions and packaging should I expect?

Panel filters are supplied in standard widths of 600 mm, 800 mm or 1200 mm, with thicknesses of 15‑30 mm. They are packed in cardboard boxes on pallets, suitable for 20‑ft or 40‑ft container loading.

Which certifications should I request before purchase?

Request the CE Declaration of Conformity, ISO 9001 audit report, and any performance test reports showing pressure drop and filtration efficiency (MERV or ISO 16890).

What is the typical lead time for an order?

Lead times are generally 4‑8 weeks after sample approval, depending on the specific filter type and order volume.

Are samples available for testing?

Altantic Air Filters can provide pre‑shipment samples accompanied by test data; buyers should specify the required size and efficiency grade when requesting a sample.

What are the common export markets for Irish air filters?

Key markets include EU member states, the United Kingdom and North America, where HVAC and industrial ventilation sectors import filters under HS 8421.

How are the filters shipped?

Filters are typically palletised and shipped in 20‑ft or 40‑ft containers, using FOB Dublin Port or CIF terms depending on the buyer’s preference.