About Alpes Gmbh - Diesel Generators Supplier in Austria

Austria‑based Alpes Gmbh lists 20 active products across heavy‑equipment, power generation and raw material categories. The catalogue references items such as diesel generators (HS 8502.13), reinforcing steel bars (HS 7214.20), iron scrap (HS 7204.49), copper scrap (HS 7403.11) and a diesel engine (HS 8408.20). Each entry includes material descriptions that range from steel enclosures and carbon‑steel deformed bars to electrolytic copper of 99.99 % purity. The supplier also mentions agricultural commodities like wheat and sunflower seed, but the core industrial list focuses on power equipment and metal commodities.

The product list includes a Perkins 1350 kVA diesel generator, a Caterpillar G3520C genset, a Caterpillar 3512 diesel engine, reinforcing steel bars specified as hot‑rolled deformed (grade B500B/grade 60), HMS 1 & 2 iron scrap, used railway rails of grade U71Mn/U75V, and copper scrap at 99.99 % purity. Additional entries cover original Caterpillar spare parts, various Caterpillar trucks and Volvo trucks, as well as diesel fuel EN590. All items are tied to their respective HS‑code families, providing a clear customs classification for international buyers.

Product Range and Specialties of Alpes Gmbh

The diesel generators listed fall under HS 8502.13 and are typically rated between 1 MW and 1.5 MW, equipped with EN590 diesel, and comply with IEC 60034‑30‑1 for efficiency and emissions. Buyers normally verify output voltage, frequency stability, fuel consumption (g/kWh) and the presence of protective relays. Reinforcing steel bars under HS 7214.20 are commonly supplied in grades B500B (EN 10080) or grade 60 (ASTM A615), with standard diameters from 6 mm to 32 mm and tensile strengths around 500 MPa. Iron scrap classified as HMS 1 & 2 must meet moisture limits below 5 % and contain minimal copper or aluminum, while copper scrap under HS 7403.11 is graded by purity (typically 99.5 % - 99.99 %) and sold in 1‑ton bulk bags. The catalogue’s mix of new equipment, OEM spare parts and bulk metals reflects typical Austrian exporters who combine precision‑engineered products with high‑volume commodity streams.

Trade and Export Information - Alpes Gmbh

Austria, as an EU member, follows the Union’s customs tariff and export licensing rules; HS 8502, 7214, 7204 and 7403 codes are routinely inspected by EU customs and may require EUR.1 movement certificates for preferential treatment. Major import markets for diesel generators and heavy‑equipment from Austria include the Middle East, North Africa and Southeast Asia, where buyers often require CE marking, ISO 9001 quality systems and compliance with IEC 61800 for inverter‑based units. Steel reinforcement and scrap are frequently shipped to construction‑intensive regions such as Eastern Europe, the GCC and South‑America, with buyers demanding EN 10210 certification for bars and REACH compliance for scrap. Standard logistics involve containerized shipments for generators (20‑ft or 40‑ft containers with internal bracing) and bulk handling for steel bars or scrap, usually on FOB or CIF terms.

Sourcing from Alpes Gmbh - Buyer Guidance

When sourcing diesel generators from Alpes Gmbh, request a full test report that includes rated power, fuel consumption at full load, noise level and a CE declaration of conformity. For reinforcing steel, ask for a mill test certificate showing chemical composition, grade designation (e.g., B500B) and tensile test results. Iron and copper scrap should be accompanied by a material analysis certificate confirming HMS classification or copper purity, and a REACH compliance statement if the destination market requires it. Verify that the HS code on the commercial invoice matches the product description, confirm packaging (e.g., steel‑framed pallets for generators, bulk bags for scrap) and clarify lead times - new generators often need 6‑8 weeks, while bulk metals can be dispatched within 2‑4 weeks after order confirmation.

What HS codes are used for the diesel generators listed by Alpes Gmbh?

The diesel generators such as the Perkins 1350 kVA unit and the Caterpillar G3520C are classified under HS 8502.13, which covers electric generating sets of 1 kW and above.

Which grade of reinforcing steel does the catalogue specify?

The reinforcing steel entries cite hot‑rolled deformed bars made from carbon steel, commonly supplied as grade B500B (EN 10080) or grade 60 (ASTM A615).

What documentation should a buyer request for the copper scrap?

Buyers should ask for a purity certificate indicating 99.99 % Cu content, a material analysis report, and a REACH compliance statement if required by the importing country.

Are there any standard certifications typically required for the generators?

Typical certifications include CE marking, IEC 60034‑30‑1 efficiency compliance, and an ISO 9001 quality‑management certificate; Alpes Gmbh does not list specific holdings, so buyers should confirm these documents.

What are the typical packaging methods for the steel reinforcement bars?

Reinforcing bars are usually bundled in steel‑tied packs of 500 kg to 1 ton, wrapped in protective film, and loaded on pallets for container shipment.

How is iron scrap classified and what are its common specifications?

The iron scrap is listed as HMS 1 & 2 under HS 7204.49, meaning it must have a maximum of 5 % moisture, low copper and aluminum content, and be free of hazardous coatings.

What lead time can a buyer expect for a new diesel generator?

For a new unit such as the Perkins 1350 kVA generator, lead times typically range from six to eight weeks, depending on engine availability and final testing.

What incoterms are commonly used for shipments from Austria?

Exporters from Austria frequently use FOB (Free on Board) or CIF (Cost, Insurance, Freight) terms, allowing the buyer to select the preferred level of transport responsibility.