Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›




Based in Turkey, Active International currently lists five distinct products across its catalogue. The listed items include Diesel EN 590 with a 10 ppm sulfur limit, crude oil, green petroleum coke, ceramic tiles and a wood pellet product marketed as briquette. Each entry falls under the broader categories of fuels, petro‑chemical by‑products, construction materials and solid bio‑fuel, reflecting a diversified export portfolio. The supplier is classified in the “harbor” trust tier, indicating a medium level of verification on the platform.
The diesel product complies with the European EN 590 standard, which mandates a maximum sulfur content of 10 ppm and a cetane number of at least 51. Crude oil is presented without a specific grade, allowing buyers to request API gravity and sulfur analysis. Green petroleum coke is described as a low‑sulfur, high‑fixed‑carbon fuel suitable for metallurgical processes. Ceramic tiles are offered in standard sizes such as 600 × 600 mm and 300 × 300 mm, with typical PEI ratings of 3‑5 for indoor use. The wood pellet, referred to as a briquette, generally meets a moisture content below 10 % and a calorific value around 4,600 kcal/kg.
Active International’s catalogue groups its five products by sector: diesel fuel, crude oil, petroleum coke, ceramic tiles and a wood‑based solid fuel. Diesel EN 590 is the standard low‑sulfur distillate used throughout the European Union, while crude oil can serve as a feedstock for refineries that specify API gravity and sulfur levels. Green petroleum coke is a by‑product of oil refining with typical specifications of 90‑95 % fixed carbon and less than 2 % sulfur. Ceramic tiles are a construction commodity where buyers often look for compliance with EN 14411, standard dimensions, and water absorption below 0.5 %. The wood pellet, marketed as a briquette, is a biomass fuel where bulk density (≈ 650 kg/m³) and ash content (under 1 %) are common quality criteria.
In the wider market, diesel grades are distinguished by cetane number, sulfur content and cold‑flow properties. Crude oil grades are classified by API gravity (light, medium, heavy) and sulfur percent, affecting refinery suitability. Petroleum coke quality is measured by petrological analysis, especially fixed carbon and sulfur. Ceramic tiles are evaluated for mechanical strength (flexural strength ≥ 30 MPa) and surface finish. Wood pellets are assessed for moisture, calorific value and durability index. Active International’s product list aligns with these industry benchmarks, enabling buyers to request the appropriate test certificates for each category.
The diesel conforms to EN 590 with a maximum sulfur content of 10 ppm, a cetane number of at least 51 and a density of 0.820‑0.845 kg/L at 15 °C. Buyers should request the latest fuel analysis report to verify these parameters.
The supplier’s ISO 9001 quality management certification is commonly requested, along with product‑specific test reports (fuel analysis, assay sheets, tile CE test, pellet calorific value). Third‑party inspection certificates from SGS, Intertek or equivalent are also standard practice.
Ask for an up‑to‑date assay report that includes API gravity, sulfur percentage, viscosity at 40 °C and pour point. These data allow you to match the crude to your refinery’s processing specifications.
Key indicators are fixed carbon content (90‑95 %), sulfur content (≤ 2 %), ash content and particle size distribution. An independent laboratory certificate and an MSDS are standard documents to request.
Turkish ceramic tiles are usually tested against EN 14411 for water absorption, flexural strength (≥ 30 MPa) and size tolerance. CE marking and the corresponding test report should be provided before shipment.
Explore similar suppliers, related products and trending categories